ARRIETA, Marina Patricia; López-Martínez, Juan; Ferrándiz Bou, Santiago; Peltzer, Mercedes(International Society for Horticultural Science (ISHS), 2015-01-20)
D-limonene is a monoterpene obtained from a variety of citrus fruit peel oil
which is the most important residue in citrus industry. It is food grade and presents
antioxidant properties. The use of antioxidants additives ...
Aldas-Carrasco, Miguel Fernando; Ferri, J. M.; López-Martínez, Juan; Samper, María-Dolores; Arrieta, Marina Patricia(John Wiley & Sons, 2020-01-20)
[EN] The effect of three additives derived from pine resin, namely, gum rosin (GR) and two pentaerythritol ester of GR, Lurefor (LF) and Unik Tack (UT), in 5, 10, and 15 wt %, on the properties of Mater-Bi, based on ...
[EN] Nanoparticles are known to be able to enhance the performance of low dense materials, achieving the small intergranular spaces to further interact with the matrix. In this work, a consolidation treatment of an ancient ...
[EN] Natural antioxidants are added in very low amounts to protect a polypropylene (PP) matrix against thermo-oxidative degradation during processing. Thus, PP is melt-blended with caffeic, chlorogenic, trans-ferrulic, and ...
[ES] Los envases plásticos utilizados para el envasado de alimentos están constituidos por materiales poliméricos de origen no renovable (derivados del petróleo) y representan una importante fuente de generación de residuos ...
Fuentes Fuentes, Jorge Mauricio(Universitat Politècnica de València, 2022-02-11)
[ES] Actualmente se usan varios materiales poliméricos para aplicaciones médicas. Debido a la facilidad de poder fabricar formas complejas, que con otros métodos es difícil realizarlas, se usa cada vez con más frecuencia ...
Fiaco García, José Fernando(Universitat Politècnica de València, 2014-04-23)
[ES] La cinética de la degradación térmica se puede estudiar y evaluar mediante diferentes métodos. En este trabajo aplicamos métodos dinámicos donde a temperatura variable medimos la evolución del peso de la muestra, donde ...
Aldás-Carrasco, Miguel Fernando; Pavón-Vargas, Cristina Paola; Ferri Azor, José Miguel; Arrieta, Marina Patricia; López-Martínez, Juan(MDPI AG, 2021-05)
[EN] Mater-Bi(R) NF866 (MB) was blended with gum rosin and two pentaerythritol esters of gum rosin (labeled as LF and UT), as additives, to produce biobased and compostable films for food packaging or agricultural mulch ...
[EN] Completely biobased and biodegradable thermoplastic starch (TPS) based materials with a tunable performance were prepared for food packaging applications. Five blends were prepared by blending TPS with 10 wt%. of ...
Arrieta, Marina Patricia(Universitat Politècnica de València, 2014-09-03)
El uso de envases plásticos, constituidos por materiales poliméricos derivados del petróleo, se ha extendido en muchas aplicaciones debido a su disponibilidad a gran escala, bajo coste de producción, gran versatilidad y ...
ARRIETA, Marina Patricia; Prats-Moya, María Soledad(Elsevier, 2012-12-01)
[EN] The simultaneous determination of 17 free amino acids and 8 biogenic amines in Alicante Monastrell wines was investigated for the first time. The quantification was carried out by using a RP-HPLC method. based on a ...
ARRIETA, Marina Patricia; Peltzer, Mercedes Ana; López Martínez, Juan; Garrigós Selva, María del Carmen; Valente, Artur J. M.; JIMENEZ MIGALLON, ALFONSO(Elsevier, 2014-01)
Active edible films were prepared by adding carvacrol into sodium caseinate (SC) and calcium caseinate (CC) matrices plasticized with two different glycerol concentrations (25 and 35 wt%) prepared by solvent casting. ...
Aldás-Carrasco, Miguel Fernando; Ferri, J. M.; Motoc, Dana Luca; PEPONI, LAURA; Arrieta, Marina Patricia; López-Martínez, Juan(MDPI AG, 2021-06)
[EN] Gum rosin (GR) was used as a natural additive to improve the compatibility between polylactic acid, PLA, and poly(butylene adipate-co-terephthalate, PBAT, blended with 20 wt.% of PBAT (PLA/PBAT). The PBAT was used as ...
Polystyrene (PS) is one of the commonly used polymer in food packaging, that is why it generates a large amount of residual PS: because of the need of reduce environmental damage that occurs, it is common to recycle this ...
Arrieta, Marina P.(Universitat Politècnica de València, 2021-01-26)
[EN] Poly(lactic acid) (PLA) has gained considerable attention as an interesting biobased and biodegradable polymer for film for food packaging applications, due to its many advantages such as biobased nature, high ...
[EN] Poly(3-hydroxybutyrate) (PHB) has gain in recent years a huge interest in the food packaging field due to its renewable origin from waste as well as non-food crops, high mechanical strength, medium-to-high barrier ...
Samper, María-Dolores; Bertomeu, D.; Arrieta, M. P.; Ferri, J. M.; López-Martínez, Juan(MDPI AG, 2018)
[EN] Recycling polymers is common due to the need to reduce the environmental impact of these materials. Polypropylene (PP) is one of the polymers called commodities polymers' and it is commonly used in a wide variety of ...
[EN] Nanohardness (H) and elastic modulus (E) properties of several biomass by-products (fruit shells) have been characterized by nanoindentation technique. Two procedures were followed: (i) 3D topographic images for the ...
[ES] Los diferentes parámetros que definen la respuesta mecánica de un material
bajo ciertas solicitaciones mecánicas son a veces difíciles de entender y
diferenciar por los alumnos que por primera vez se enfrentan a ...
The microstructural, thermal, and nanomechanical characterization of biomass by-products coming from
the food industry were studied. Scanning electron microscopy showed a microstructure formed by polygonal grains. The ...