[EN] Gasoline direct injection (GDI) nozzles are manufactured to meet geometric specifications with length scales on
the order of a few hundred microns. The machining tolerances of these nominal dimensions are not always ...
Pandal, A.; Pastor Enguídanos, José Manuel; Payri, Raul; Kastengren, Alan; Duke, Daniel J.; Matusik, Katarzyna E; GIRALDO-VALDERRAMA, JHOAN SEBASTIAN; Powell, Christopher F.; Schmidt, D.(SAE International, 2017)
[EN] The dense spray region in the near-field of diesel fuel injection remains an enigma. This region is difficult to interrogate with light in the visible range and difficult to model due to the rapid interaction between ...
[EN] In this work, the effect of high injection pressures and ambient gas properties on diesel spray penetration and spreading angle are studied. To this end a multi-hole piezoelectric injector was used,
and MIE-scattering ...
[EN] In this paper, the behavior and turbulence structure of a non-reacting jet with a co-flow stream is described by means of Large Eddy Simulations (LES) carried out with the computational tool OpenFoam. In order to study ...
Giraldo Valderrama, Jhoan Sebastián(Universitat Politècnica de València, 2015-05-18)
[EN] The experiment of Cabra has been of great interest, because these kind of flames allow analysis of flame stabilization by a vitiated co-flow (like products of combustion). This phenomenon has been seen in several ...
[EN] In this study, a macroscopic characterization has been performed on a solenoid diesel injector (2200 bar-8 hole nozzle) under various non-reacting but evaporative conditions. For vapor penetration a two pass Schlieren ...
Battistoni, Michele; Magnotti, Gina M.; Genzale, Caroline L.; Arienti, Marco; Matusik, Katarzyna E.; Duke, Daniel J.; GIRALDO-VALDERRAMA, JHOAN SEBASTIAN; Ilavsky, Jan; Kastengren, Alan L.; Powell, Christopher F.; Marti-Aldaravi, Pedro(SAE International, 2018)
[EN] In order to improve understanding of the primary atomization process for diesel-like sprays, a collaborative experimental and computational study was focused on the near-nozzle spray structure for the Engine Combustion ...
Giraldo Valderrama, Jhoan Sebastián(Universitat Politècnica de València, 2018-12-10)
En la exploración de nuevos métodos para el mejoramiento de la eficiencia y rendimiento del motor diésel, es claro que un gran esfuerzo debe estar enfocado en el proceso de inyección de combustible. La eficiencia de la ...
[EN] In this paper, a methodology for Phase Doppler Anemometry (PDPA) measurements on a multi-hole diesel injector is developed. Several key considerations were taken into account in this methodology: The windows for PDPA ...