Buscar en RiuNet

Listar

Todo RiuNet

Mi cuenta

Acceder

Ayuda RiuNet

Admin. UPV

Listar por autor "Pagano, Vincenzo"

Mostrando ítems 1-7 de 7

Analysis of a stratified pre-chamber spark ignition system under lean mixture conditions

Pagano, Vincenzo (Universitat Politècnica de València, 2020-10-19)

[EN] In the current work, the characterization of the combustion process inside a stratified pre-chamber spark ignition (PCSI) system is performed. An extensive bibliographical review about the pre-chamber systems developed ...
Combustion analysis of a stratified pre-chamber ignition system by means of a zero-dimensional turbulence and flame speed model

Macian Martinez, Vicente; Salvador, Francisco Javier; De La Morena, Joaquín; Pagano, V. (Elsevier, 2021-10)

[EN] In the current work, the combustion process inside a stratified pre-chamber ignition system is analyzed. The pre-chamber is installed on a Rapid Compression-Expansion Machine (RCEM) and runs at different combinations ...
Experimental investigation of the effect of orifices inclination angle in multihole diesel injector nozzles. Part 2-Spray characteristics

Payri, Raul; Salvador, Francisco Javier; De La Morena, Joaquín; Pagano, Vincenzo (Elsevier, 2018)

[EN] Diesel spray development is a key research topic due to its impact on the combustion characteristics. On the current paper, the effect of the orifices inclination angle on the spray penetration characteristics is ...
Modelado unidimensional de la interacción entre inyecciones múltiples cercanas para un inyector solenoide balístico

Pagano, Vincenzo (Universitat Politècnica de València, 2017-08-29)

For the current Final Master Thesis, an investigation of a solenoid common-rail injector has been carried out to understand the hydraulic interactions between close-coupled injections events. For this purpose, a one-dimensional ...
One-dimensional modeling of the interaction between close-coupled injection events for a ballistic solenoid injector

Payri, Raul; De La Morena, Joaquín; Pagano, Vincenzo; Hussain, Ali; Sammut, Gilbert; Smith, Les (SAGE Publications, 2019-04)

[EN] In this article, an investigation of a solenoid common-rail injector has been carried out to understand the hydraulic interactions between close-coupled injection events. For this purpose, a one-dimensional model of ...
Optical evaluation of orifice orientation and number effects on active pre-chamber spark ignition combustion

Novella Rosa, Ricardo; De La Morena, Joaquín; Pagano, Vincenzo; Pitarch, Rafael (Elsevier, 2023-04-15)

[EN] Pre-chamber spark ignition combustion has shown several advantages for its implementation in engines, mainly related to its capability to achieve stable operation at lean or diluted mixtures and increased combustion ...
Using a one-dimensional spray model to improve liquid length and ignition delay estimations for diesel flames

Payri, Raul; Salvador, F.J.; De La Morena, Joaquín; Pagano, Vincenzo (Elsevier, 2017)

[EN] In the current paper, a methodology based on the combination of a one-dimensional spray model and experimental correlations has been proposed to predict the physical time associated with ignition delay in diesel ...