Buscar en RiuNet

Listar

Todo RiuNet

Mi cuenta

Acceder

Ayuda RiuNet

Admin. UPV

Listar por palabra clave "Loading"

Mostrando ítems 1-8 de 8

A new simplified procedure to estimate loads on slabs and shoring during the construction of multistorey buildings

Calderón García, Pedro Antonio; Alvarado Vargas, Yezid Alexander; Adam Martínez, José Miguel (Elsevier, 2011-05)

This paper presents a new simplified procedure for estimating loads on slabs and shoring during the construction of multistorey buildings. The new procedure takes into account the actual stiffness of the shoring and for ...
Effective flexural stiffness of slender reinforced concrete columns under axial forces and biaxial bending

Bonet Senach, José Luís; Romero, Manuel L.; Miguel Sosa, Pedro (Elsevier, 2011-03)

Most of the design codes (ACI-318-2008 and Euro Code-2-2004) propose the moment magnifier method in order to take into account the second order effect to design slender reinforced concrete columns. The accuracy of this ...
Estrategias de sostenibilidad para la Distribución Urbana de Mercancías en Santo Domingo (República Dominicana). Diagnóstico de la situación actual y propuestas de mejora.

Tavárez Fadul, Karla María (Universitat Politècnica de València, 2021-11-02)

[ES] La distribución urbana de mercancías ha evolucionado de manera considerable en los últimos años, principalmente debido al crecimiento del comercio electrónico. Esto ha provocado que en la ciudad aumenten las diversas ...
Experimental tests of slender reinforced concrete columns under combined axial load and lateral force

BARRERA PUERTO, ANGELA; Bonet Senach, José Luís; Romero, Manuel L.; Miguel Sosa, Pedro (Elsevier, 2011-12)

The use of high strength concrete (HSC) in columns has become more frequent since a substantial reduction of the cross-section is obtained, meaning that slenderness increases for the same axial load and length, producing ...
Finite element modelling of steel-caged RC columns subjected to axial force and bending moment

Garzón Roca, Julio; Adam Martínez, José Miguel; Calderón García, Pedro Antonio; Valente, Isabel B. (Elsevier, 2012-07)

Steel caging is an effective, economical, easily applied and widely used method of strengthening RC columns. Based on the results of two experimental studies, this paper proposes the finite element modelling of RC columns ...
Propagación de ondas de choque en materiales. Aplicación a modelado de choque láser en Abaqus

Palmero Buendía, Eusebio (Universitat Politècnica de València, 2020-04-21)

[ES] Generalidades de las ondas de choque: ecuaciones base, curvas características y métodos de propagación. Modelado de choques láser en Abaqus a través de la simulación de un test de impacto además de una distribución ...
Silos and tanks in research and practice: state of the art and current challenges

ROTTER, J. Michael (Editorial Universitat Politècnica de València, 2009-11-25)

Silos and tanks are probably the commonest form of large engineering shell structure in service, but their placement on industrial sites and out of the public eye often leads them to be neglected by researchers and the ...
Temperature effects on load transmission between slabs and shores

Gasch, Isabel; Alvarado Vargas, Yezid Alexander; Calderón García, Pedro Antonio (Elsevier, 2012-06)

This paper analyses the influence of temperature changes on load transmission between floor slabs and shores during the in situ casting of concrete slabs by the shoring-clearing-striking method. Therefore several experimental ...