Badía Valiente, José David; Santonja Blasco, Laura; Martinez-Felipe, Alfonso; Ribes Greus, María Desamparados(Elsevier, 2012-05)
The energetic valorization process of bio-based polymers is addressed in this study, taking polylactide (PLA) as model. The pyrolysis of virgin and multiple-injected PLA was simulated by means of multi-rate linear-non-isothermal ...
[EN] This paper reports the first results on alkylphenol pollution in edible bivalves from the Spanish coast. Two sampling campaigns (July 2006 and July 2007) were carried out to determine the concentration of nonylphenol ...
Fornes Sebastiá, Fernando; Belda Navarro, Rosa María; Lidón Cerezuela, Antonio Luis(Elsevier, 2015-01-01)
[EN] Two biochars, one from forest waste (BCH-FW) and the other from olive mill waste (BCH-OMW), and one hydrochar from forest waste (HYD-FW) were analyzed from the horticultural and environmental point of view. Several ...
[EN] In this article, the pyrolysis and thermo-degradation of 11 virgin-polypropylene (virgin-PP) with different levels of arsenic in its polymer matrix, was carried out in a discontinuous quartz reactor at 500 degrees C. ...
Gala, Alberto; Guerrero, Marta; Guirao, Beatriz; Domine, Marcelo Eduardo; Serra Alfaro, José Manuel(American Chemical Society, 2020-05-21)
[EN] The liquids resulting from pyrolysis of industrial plastic waste (IPW) and postconsumer colored and white plastic film waste (PCPW and PWPW, respectively) at the pilot scale (80 kg/h) were widely characterized by ...
Thermal degradation of PLA is a complex process since it comprises many simultaneous reactions. The use of analytical techniques, such as differential scanning calorimetry (DSC) and thermogravimetry (TGA), yields useful ...
Lechuga Romero, Rocío Marina(Universitat Politècnica de València, 2022-06-27)
[ES] Las condiciones medioambientales actuales han hecho necesario buscar y utilizar nuevas fuentes de energía, dando lugar a alternativas energéticas modernas como la biomasa. La energía de la biomasa es relativamente ...
Galdo, Antonella(Universitat Politècnica de València, 2021-09-06)
[ES] La creciente demanda de energía por parte de la población mundial, relacionada con la mejora de la calidad de vida, ha generado un aumento de la contaminación ambiental por el uso masivo de combustibles fósiles. En ...
Vila Pérez, Ricardo(Universitat Politècnica de València, 2021-01-15)
[ES] Con la actual crisis económica a nivel global y la cantidad limitada de combustibles fósiles, un cambio en dirección hacia procesos industriales más sostenibles es una necesidad. Además, problemas medioambientales a ...
Gala Buro, Alberto Jesús(Universitat Politècnica de València, 2022-12-18)
[ES] La presente Tesis Doctoral se ha centrado en la demostración de la viabilidad técnica de un proceso de valorización de residuos plásticos de tipo poliolefínico a una escala de planta piloto y en un entorno industrial ...
Balaguer Benlliure, Víctor(Universitat Politècnica de València, 2019-09-03)
[ES] En la actualidad hay un marcado interés en buscar procesos para aumentar la
densidad energética de los materiales ya existentes y el proceso por pirólisis es uno
de esos. El presente estudio determinó el rendimiento ...
[EN] In this article, the pyrolysis and thermo-oxidative degradation of five industrial waste products was carried out in
a discontinuous quartz reactor at 550 ¿C under the auto-catalytic effect of residues of titanium ...
Cháfer Pericás, María Consuelo; Maquieira Catala, Ángel; Puchades, Rosa(Elsevier, 2012-01)
[EN] In recent years, research has focused on the development of different types of inorganic nanoparticles (NPs) to be used as labels in immunoassays instead of fluorophores or organic particles. Basically, inorganic NPs ...
García Baldoví, Hermenegildo; Valencia Valencia, Susana; Alvaro Rodríguez, Maria Mercedes; Abdullah, Asiri M.; García Gómez, Hermenegildo(Royal Society of Chemistry, 2015)
[EN] C-dots obtained in the homogeneous phase may exhibit a broad particle size distribution. The formation of C-dots within nanometric reaction cavities could be a methodology to gain control on their size distribution. ...
Sustainable biocomposites based on thermoplastic starch copolymers (Mater-Bi KE03B1) and biofibres (cotton, hemp and kenaf) were prepared and characterised in terms of their thermo-mechanical and morphological properties. ...
Estañ Lloret, Mercedes(Universitat Politècnica de València, 2023-09-20)
[ES] El objetivo de este estudio es la identificación de posibles rutas de reciclaje y el cálculo de la calidad del reciclaje para los residuos compuestos de las palas de los aerogeneradores.
Actualmente, se puede ...
Garzón Martín, Fernando(Universitat Politècnica de València, 2023-10-31)
[ES] La Unión Europea apuesta por las energías renovables para la mitigación del cambio climático. Estás no están siempre disponibles y por ello se requieren métodos que permitan el almacenamiento de energía. Para ello se ...
ARRIETA, Marina Patricia; Parres García, Francisco José; López Martínez, Juan; Navarro Vidal, Raúl; Ferrándiz Bou, Santiago(Federación de Asociaciones de Ingenieros Industriales de España (FAIIE), 2012)
[EN] Pyrolysis of bioplastics waste may offer
an alternative waste treatment option,
allowing the recovery of resources.
Bioplastics have taken special interest
in the industry. They could be an
alternative to ...
[EN] Chemical upcycling technologies are emerging as the most viable to combat plastic waste accumulation. Among them, catalytic pyrolysis is very promising as it is feedstock agnostic. However, the high energy demand ...
Gala Buro, Alberto Jesus; Catalán-Martínez, David; Guerrero, Marta; Serra Alfaro, José Manuel(Elsevier, 2021-03-01)
[EN] An enhancement of the properties of pyrolysis liquids (PL) from municipal plastic waste (mainly low-density polyethylene) by catalytic hydrotreatment is required to obtain automotive quality fuels. In this context, ...