Espinós Capilla, Ana; Romero, Manuel L.; Portolés Flag, Jose Manuel; Hospitaler Pérez, Antonio(Elsevier, 2014-09)
This paper presents the results of an experimental program carried out on slender elliptical hollow section columns filled with concrete. Given the reduced number of experimental results found in the literature on concrete ...
García Taengua, Emilio José(Universitat Politècnica de València, 2013-10-21)
The use of steel fiber reinforced concrete (SFRC hereafter) is becoming more and more
common. Building codes and recommendations are gradually including the positive effect of
fibers on mechanical proper ...
Valdés, Arantzazu; Fenollar Gimeno, Octavio Ángel; Beltrán, Ana; Balart Gimeno, Rafael Antonio; Fortunati, Elena; Kenny, Jose Mª; Garrigos, María Carmen(Elsevier, 2016-10)
[EN] Reinforced poly(e-caprolactone) (PCL)/almond skin (AS) biocomposites were prepared by extrusion and injection moulding at different AS contents (0, 10, 20, 30 wt%) in order to revalorize this agricultural residue. AS ...
In this investigation, the characteristics and the rheological properties of two different nanocomposite systems were investigated. These systems consisted of a dispersion of carbon nanotubes (CNTs) and carbon nanofibers ...
Cubel Arjona, Francisco José; Mas Tomas, Maria de los Angeles; Vercher Sanchis, José María; Gil Benso, Enrique(Elsevier, 2012-11)
Brick façades enclosures traditionally used in residential architecture in Spain generate stability, insulation and waterproofing problems. Self-supporting enclosures with continuous air chamber solve these problems. The ...
Martí Vargas, José Rocío; Serna Ros, Pedro; Navarro Gregori, Juan; Bonet Senach, José Luís(Elsevier, 2012)
The bond behaviour of prestressing strands in precast pretensioned concrete members, and its transmission length, depends on several factors. However, no consensus exists on the main parameters to be considered in the ...
Carpio Sánchez, Irene(Universitat Politècnica de València, 2012-01-12)
ENSAYOS DE PELADO EN ¿T¿ Y DE RESISTENCIA AL DESPEGUE EN REFUERZOS TEXTILES DE PINTURAS SOBRE LIENZO MEDIANTE SOPORTES RÍGIDOS: VALORACIÓN DE LAS UNIONES OBTENIDAS.
Cortines Aroca, Oscar(Universitat Politècnica de València, 2021-02-10)
[EN] The most frequent problem in terms of pathology and probably the one with the greatest economic
impact that steel presents in structural concrete reinforcements, is the corrosion of the
nomic reinforcements. This ...
Carrera Castelló, Marcos(Universitat Politècnica de València, 2019-07-18)
[EN] The purpose of this Final Degree Project is to study the reinforcement of the CV-50 road between P.K. 6+425 and P.K. 11+000. Among the main objectives are to stop pavement degradation, increase the bearing capacity ...
Santamaría de Andrés, Irene Clara(Universitat Politècnica de València, 2022-02-21)
[ES] La pelota vasca es un enraizado deporte de un territorio concreto, el País
Vasco, que se ha expandido a lo largo de todo el mundo, siendo practicado
tanto en Europa como en América de Sur. Quizá sea por su tradición, ...
Gimeno Ayuso, Diego(Universitat Politècnica de València, 2018-10-04)
[ES] El propósito de este informe es realizar una valoración de daños y plantear recomendaciones respecto a cómo debe realizarse la rehabilitación, reparación y refuerzo de los elementos estructurales con el fin de que se ...
Salvador Tomás, Fernando(Universitat Politècnica de València, 2014-07-31)
[EN] This work consists of the analysis and later capture of decision of action, on a series of existing
pathologies of the props of the floor of basement of a building
In this paper we apply the recent notion of anytime universal intelligence tests to the evaluation of a popular reinforcement learning algorithm, Q-learning. We show that a general approach to intelligence evaluation of ...
[EN] This research analyzes the solution of reinforced concrete joints reinforced with steel sections, known as steel reinforced concrete (SRC). The aim is to verify the improvement of the ductile characteristics of steel ...
Espinós Capilla, Ana; Romero, Manuel L.; Hospitaler Pérez, Antonio(Elsevier, 2013-11)
A method for calculating the design axial buckling load in the fire situation of unreinforced axially loaded concrete filled circular hollow section columns was presented by the authors in a previous paper [1]. In the ...
Terroba Delicado, Enrique; Quiles-Carrillo, Luis; Ivorra-Martínez, Juan; Montanes, Nestor; Sanchez-Nacher, Lourdes(Asociación Española de Materiales Compuestos, 2022-07-18)
[EN] This work deals with the revaluation of coffee bean residues from the coffee liquor industry with the aim of developing eco-efficient composite materials with a polymeric matrix of polylactic acid (PLA). The coffee ...
Martí Vargas, José Rocío; García Taengua, Emilio José; Serna Ros, Pedro(Elsevier, 2013-11)
An experimental research addressing the effects of concrete composition and strength on anchorage bond behavior of prestressing reinforcement is presented to clarify the effect of material properties that have appeared ...
Aguado López, José Vicente; Espinós Capilla, Ana; Hospitaler Pérez, Antonio; Ortega, J.; Romero, Manuel L.(Elsevier, 2012-10)
[EN] This paper describes standard scale fire tests conducted on four precast prestressed hollow core slabs configurations under flexure. The influence of the reinforcement arrangement was investigated using two test ...
Almerich Chulia, Ana Isabel; Martín Concepcion, Pedro Efrén; Molines Cano, José Miguel; Rovira Soler, Juan Antonio(Trans Tech Publications, 2012)
[EN] This part analyzed GFRP rebar's research situation, summarized its behaviuor as internal reinforcement for concrete structures. The research has been developed over recent years, however the rules and standard codes ...