A comparative study using diesel fuel and gasoline has been conducted focusing on the injection process. In this paper an experimental study has been carried out comparing the effects of the different fuels on the mass ...
Tamaki, Nobushige; Harada, Takato(Editorial Universitat Politècnica de València, 2017-07-28)
[EN] The purpose of this study is to improve the spray characteristics of a direct injection Diesel nozzle. Spray
atomization of the multi-hole atomization enhancement nozzle, which was invented in previous studies, is ...
Cardona, Santiago; Payri, Raul; Salvador, Francisco Javier; Gimeno, Jaime(Elsevier, 2023-03-01)
[EN] The atomization process is critical for combustion systems since it directly influences emissions and perfor-mance. Thus injection system should provide the spray required structure and characteristics, e.g., angle ...
In this work, three Engine Combustion Network (ECN) single-hole nozzles with the same nominal characteristics have been tested under a wide range of conditions measuring spray penetration and spreading angle. n-Dodecane ...
[EN] The early stage spray characteristics have a great impact on the secondary atomization progress, and thus affect
the engine combustion and emission performances. The experimental investigation of the early stage ...
[EN] The injection process of the urea-water solution (UWS) determines the initial conditions for the mixing and evaporation of the fluid in the selective catalytic reduction system. In this study, the liquid atomization ...