Buscar en RiuNet

Listar

Todo RiuNet

Mi cuenta

Acceder

Ayuda RiuNet

Admin. UPV

Listar por palabra clave "Thermoplastics"

Mostrando ítems 1-10 de 10

Analysis of fouling resistances under dynamic membrane filtration

Vincent Vela, Maria Cinta; Cuartas Uribe, Beatriz Elena; Alvarez Blanco, Silvia; Lora García, Jaime (Elsevier, 2011-04)

The mechanisms of fouling in the ultrafiltration of polyethylene glycol (PEG) are analysed using the complete blocking and the intermediate blocking Hermia's models adapted to crossflow filtration. The parameters of these ...
Comparative Study of the Rheological Behavior of Multiwalled Carbon Nanotubes and Nanofiber Composites Prepared by the Dilution of a Masterbatch of Polypropylene

Boronat Vitoria, Teodomiro; García Sanoguera, David; Pascual, J.; Peris, F.; Sánchez Nacher, Lourdes (Wiley-Blackwell, 2012-11-05)

In this investigation, the characteristics and the rheological properties of two different nanocomposite systems were investigated. These systems consisted of a dispersion of carbon nanotubes (CNTs) and carbon nanofibers ...
Improvement of adhesion properties of polypropylene substrates by methylmethacrylate UV photografting surface treatment

Balart Gimeno, Javier Francisco; Fombuena Borrás, Vicent; España, J.M.; Sánchez Nacher, Lourdes; Balart Gimeno, Rafael Antonio (Elsevier, 2012-01)

Polypropylene is a widely used commodity plastic from an industrial point of view. Typical applications include both low and high technological content, as it has a good balance between overall properties, processability ...
Improvement of liquid absorption properties of nonwoven polypropylene substrates by low pressure plasma treatment with CH4-O2 mixture gas

López, R.; Pascual Payá, Mónica; García Sanoguera, David; Sánchez Nacher, Lourdes; Balart Gimeno, Rafael Antonio (Springer Verlag (Germany), 2012-11)

The use of nonwoven textile substrates for filtration and absorption purposes is generalized due to the high surface area they can provide. Many of these applications require good wetting properties to increase efficiency. ...
Poly(lactic acid) formulations with improved toughness by physical blending with thermoplastic starch

Ferri, J.M.; Garcia-Garcia, D.; Carbonell-Verdu, A.; Fenollar, Octavio; Balart, Rafael (John Wiley & Sons, 2018)

[EN] This work focuses on poly(lactic acid) (PLA) formulations with improved toughness by physical blending with thermoplastic maize starch (TPS) plasticized with aliphatic¿aromatic copolyester up to 30 wt %. A noticeable ...
Rapidly assemled emergency shelters made from "green" materials

SALIKLIS, Edmond P.; ARENS, Robert M. (Editorial Universitat Politècnica de València, 2010-01-26)

This paper describes a research project conducted by the Department of Architectural Engineering, the Department of Architecture and the Department of Materials Engineering at California Polytechnic State University. We ...
Surface modification of polypropylene substrates by UV photografting of methyl methacrylate (MMA) for improved surface wettability

Balart Gimeno, Javier Francisco; Fombuena Borrás, Vicent; Boronat Vitoria, Teodomiro; Reig Pérez, Miguel Jorge; Balart Gimeno, Rafael Antonio (Springer Verlag (Germany), 2012-03)

Despite polypropylene is one of the most used commodity plastics, its adhesion properties are remarkably restricted by its non-polar nature which leads to low wetting properties and, consequently, poor adhesion behavior. ...
The influence of injection molding parameters on electrical properties of PC/ABS-MWCNT nanocomposites

WEGRZYN, MARCIN; Juan Nadal, Sara; Benedito, Adolfo; Giménez Torres, Enrique (Wiley, 2013-11-05)

[EN] The influence of injection molding parameters on electrical properties and morphology of PC/ABS-MWCNT nanocomposites is presented in this article. Investigation is based on the masterbatch of 5.0wt% carbon nanotubes ...
Thermal properties of a hybrid composite material for aerospace production applications

Fernández de Palencia Navarro, María (Universitat Politècnica de València, 2022-11-23)

[EN] This thesis project will be carried out in collaboration with the Chair of Carbon Composites of the Technical University of Munich (TUM). The use of composite materials is becoming increasingly popular in aircraft ...
Tunability of polycaprolactone hydrophilicity by carboxymethyl cellulose loading

Alemán-Domínguez, M.E.; Ortega, Z.; Benítez, A.N.; Vilariño, Guillermo; Gómez-Tejedor, José Antonio; Vallés Lluch, Ana (John Wiley & Sons, 2017)

[EN] Carboxymethyl cellulose (CMC) is herein proposed as additive in polycaprolactone (PCL) matrices to obtain composites with tunable hydrophilicity. This composite material can be obtained by compression molding. The ...