Buscar en RiuNet

Listar

Todo RiuNet

Mi cuenta

Acceder

Ayuda RiuNet

Admin. UPV

Listar por palabra clave "SEBS"

Mostrando ítems 1-18 de 18

Análisis DSC para la caracterización térmica de mezclas de polímeros para inyección

Juárez Varón, David; Ferrándiz Bou, Santiago; Peydró Rasero, Miguel Ángel; Mengual Recuerda, Ana (Area de innovación y Desarrollo, S.L., 2014-05)

[EN] DSC analysis (differential scanning calorimetry) allows obtaining thermal information from polymers’ blends that have been studied in this work. SEBS blends were made using two commercial grades of transparent SEBS ...
Análisis TGA para la caracterización térmica de mezclas de polímeros para inyección

Juárez Varón, David; Ferrándiz Bou, Santiago; Peydro, M. A.; Mengual Recuerda, Ana (Área de Innovación y Desarrollo S.L, 2014-08)

[EN] TGA analysis (thermogravimetric analysis) allows obtaining thermal information from polymers’ blends that have been studied in this work. SEBS blends were made using two commercial grades of transparent SEBS with ...
Improvement of thermal inertia of styrene-ethylene/butylene-styrene (SEBS) polymers by addition of microencapsulated phase change materials (PCMs)

Juárez Varón, David; Ferrándiz Bou, Santiago; Fenollar, O.; Fombuena, V.; Balart, R. (Elsevier, 2011)

[EN] In this work, microencapsulated phase change materials (PCMs) with a melting temperature of 52 °C have been used to improve thermal inertia phenomena on an elastomeric matrix of styrene-ethylene/butylene-styrene (SEBS) ...
Investigación sobre la incorporación de SEBS en el proceso de recuperación de residuos de ABS para la mejora de propiedades mecánicas y reológicas

Peydró Rasero, Miguel Ángel (Editorial Universitat Politècnica de València, 2014-09-22)

El proceso de inyección es un proceso de conformado de materiales poliméricos termoplásticos que representa una notable importancia económica y tecnológica y cuyo estudio ha supuesto multitud de investigaciones ...
Mechanical characterization of sebs compounds with phase change materials (PCM)

Juárez Varón, David; Ferrándiz Bou, Santiago; Balart Gimeno, Rafael Antonio; Peydró Rasero, Miguel Ángel; Fenollar Gimeno, Octavio Ángel (Editura Universitatii din Oradea, 2011)

SEBS (styrene-ethylene/butylene-styrene) polymers successfully combine elastomeric properties with low processing costs typical of commodity plastics. This study focuses on a blend from the provider¿s SEBS extreme hardness ...
Mejora de la inercia térmica de mezclas de sebs mediante la adición de materiales con cambio de fase (PCMs) a 28 ºC

Juárez Varón, David; Ferrándiz Bou, Santiago; Fenollar Gimeno, Octavio Ángel; Fombuena Borrás, Vicent; Balart Gimeno, Rafael Antonio (Area de Innovación y Desarrollo S.L, 2012)

[EN] In this work, microencapsulated phase change materials (PCMs) with a melting temperature of 28 ºC have been used to improve thermal inertia phenomena on an elastomeric matrix of styrene-ethylene/butylenes-styrene ...
Recovery of recycled acrylonitrile-butadiene-styrene, through mixing with styrene-ethylene/butylene-styrene

Peydro, M. A.; Parres, F.; Crespo Amorós, José Enrique; Navarro Vidal, Raúl (Elsevier, 2013-08)

Recovery of recycled acrylonitrile-butadiene-styrene (ABS) through mixing with styrene-ethylene/butylene-styrene (SEBS) has been studied in this paper. To simulate recycled ABS, virgin ABS was processed through 5 cycles, ...
Recuperación de Hips mediante SEBS: Caracterización reológica y mecánica

Peydro, M. A.; Juárez Varón, David; Sellés Cantó, Miguel Ángel; Sanchez-Caballero, Samuel (Area de Innovación y Desarrollo S.L, 2013)

[EN] The effect of reprocessing two mixtures: recycled high impact polystyrene (HIPS) with polybutadiene (PB); and HIPS with styrene-ethylene-butylenestyrene (SEBS) have been studied in this article. Our results show ...
Recuperación de plásticos reciclados mediante adicción de elastómeros termoplásticos. Caracterización mecánica y térmica

Peydro, M. A.; Parres, F.; Crespo Amorós, José Enrique; Navarro Vidal, Raúl (Federación de Asociaciones de Ingenieros Industriales de España (FAIIE), 2012-09)

[EN] Recovery of recycled acrylonitrile butadiene styrene (ABS) through mixing with styrene-ethylene/butylene-styrene (SEBS) has been studied in this paper. To simulate recycled ABS, virgin ABS was processed through 5 ...
Rheological characterization and mathematical modeling of a SEBS blend for industrial applications where nowadays liquid silicone rubber is used

Juárez Varón, David; Ferrándiz Bou, Santiago; Balart Gimeno, Rafael Antonio; Reig Pérez, Miguel Jorge; Peydro, M. A. (Trans Tech Publications, 2012)

[EN] SEBS (styrene-ethylene/butylene-styrene) is a hydrogenated SBS used as a compatibilizer of other thermoplastic or as a blend to improve the properties (mainly impact). There is very little information about SEBS's ...
Study of mechanical behavior of a sebs blend for injection molding

Juárez Varón, David; Balart Gimeno, Rafael Antonio; Ferrándiz Bou, Santiago; Peydró Rasero, Miguel Ángel; Sellés Cantó, Miguel Ángel (Editura Universitatii din Oradea, 2011)

This study focuses on a blend from the provider¿s SEBS extreme hardness (50% Shore-A 5 and 50% Shore-A 90) in order to analyze the miscibility of mixed materials from the storage of 2 references only. It has been used ...
Study of mechanical behavior of reprocessing high impact polystyrene, recovery with SEBS

Peydró Rasero, Miguel Ángel; Juárez Varón, David; Crespo Amorós, José Enrique; Parres, F. (Editura Universitatii din Oradea, 2012)

The effect of reprocessing High Impact Polystyrene (HIPS) has been studied in this paper. To simulate recycled HIPS, we reprocessed virgin HIPS through 5 cycles. The HIPS has been mechanically characterized after the various ...
Study of the Influence of adding styrene-ethylene/butadiene-styrene in acrylonitrile-butadiene-styrene and polyethylene blends

Peydro, M. A.; Parres, F.; Navarro Vidal, Raúl; Sanchez-Caballero, Samuel (Wiley-Blackwell, 2014-06)

This work studies the recovery of two grades of acrylonitrile butadiene styrene (ABS) contaminated with low-density polyethylene (LDPE), by adding styrene ethylene/butadiene styrene (SEBS). To simulate contaminated ABS, ...
Study of the mechanical properties of recycled abs and recovery throught mixing with SEBS

Peydro, M. A.; Juárez Varón, David; Sanchez-Caballero, Samuel; Pla-Ferrando, R. (Editura Universitatii din Oradea, 2014-05)

Recovery of recycled acrylonitrile butadiene styrene (ABS) through mixing with styrene-ethylene/butylene- styrene (SEBS) has been studied in this paper. To simulate recycled ABS, virgin ABS was processed through 5 cycles, ...
Study, mechanical characterization and mathematical modeling of compatible SEBS blends for industrial applications in orthopedics and childcare

Juárez Varón, David; García Sanoguera, David; Ferrándiz Bou, Santiago; Peydro, M. A.; Balart Gimeno, Rafael Antonio (Taylor & Francis: STM, Behavioural Science and Public Health Titles, 2013-07-13)

In this work, a system of compatible blends based on two commercial grades of a thermoplastic elastomer, styrene-ethylene/ butylene-styrene (SEBS), with extreme Shore A hardness values (5 and 90), was studied in order ...
Thermal Analysis (Differential Scanning Calorimetry And Thermogravimetric Analysis) Of SEBS Blends For Injection Molding

Juárez Varón, David; Ferrándiz Bou, Santiago; Peydró Rasero, Miguel Ángel; Sánchez Caballero, Samuel (Editura Universitatii din Oradea, 2013)

[EN] Thermal analysis (DSC: Differential Scanning Calorimetry and TGA: Thermogravimetric Analysis) of SEBS blends have been studied in this paper. SEBS blends were made using two transparent SEBS commercial grades with ...
Thermal analysis of SEBS blends with phase change material for injection molding

Peydro, M. A.; Juárez Varón, David; Pérez Bernabeu, Elena; Sellés Cantó, Miguel Ángel (Editura Universitatii din Oradea, 2014-12)

Thermal analysis: Differential Scanning Calorimetry and Thermogravimetric Analysis (DSC and TGA) of SEBS blends with phase change materials (PCMs) have been studied in this paper. SEBS blends were made using two transparent ...
Validation of the Use of SEBS Blends as a Substitute for Liquid Silicone Rubber in Injection Processes

Juárez Varón, David; R. Balart; T. Boronat; Reig Pérez, Miguel Jorge; Ferrándiz Bou, Santiago (Taylor & Francis: STM, Behavioural Science and Public Health Titles, 2013)

Liquid silicone rubber is an interesting material at an industrial level, but there are great difficulties in the design and machining of molds, and in addition, it cannot be processed using conventional equipment. ...