- -

Development of Sustainable and Cost-Competitive Injection-Molded Pieces of Partially Bio-Based Polyethylene Terephthalate through the Valorization of Cotton Textile Waste

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

  • Estadisticas de Uso

Development of Sustainable and Cost-Competitive Injection-Molded Pieces of Partially Bio-Based Polyethylene Terephthalate through the Valorization of Cotton Textile Waste

Mostrar el registro sencillo del ítem

Ficheros en el ítem

Thumbnail
Nombre: Montava-Jordà;Tor ...
Tamaño: 7.384Mb
Formato: PDF
Descripción: Versión editorial
Abrir
dc.contributor.author Montava-Jordà, Sergi es_ES
dc.contributor.author Torres-Giner, S. es_ES
dc.contributor.author Ferrándiz Bou, Santiago es_ES
dc.contributor.author Quiles-Carrillo, Luis es_ES
dc.contributor.author Montanes, Nestor es_ES
dc.date.accessioned 2020-06-06T03:32:36Z
dc.date.available 2020-06-06T03:32:36Z
dc.date.issued 2019-03-19 es_ES
dc.identifier.uri http://hdl.handle.net/10251/145546
dc.description.abstract [EN] This study presents the valorization of cotton waste from the textile industry for the development of sustainable and cost-competitive biopolymer composites. The as-received linter of recycled cotton was first chopped to obtain short fibers, called recycled cotton fibers (RCFs), which were thereafter melt-compounded in a twin-screw extruder with partially bio-based polyethylene terephthalate (bio-PET) and shaped into pieces by injection molding. It was observed that the incorporation of RCF, in the 1¿10 wt% range, successfully increased rigidity and hardness of bio-PET. However, particularly at the highest fiber contents, the ductility and toughness of the pieces were considerably impaired due to the poor interfacial adhesion of the fibers to the biopolyester matrix. Interestingly, RCF acted as an effective nucleating agent for the bio-PET crystallization and it also increased thermal resistance. In addition, the overall dimensional stability of the pieces was improved as a function of the fiber loading. Therefore, bio-PET pieces containing 3¿5 wt% RCF presented very balanced properties in terms of mechanical strength, toughness, and thermal resistance. The resultant biopolymer composite pieces can be of interest in rigid food packaging and related applications, contributing positively to the optimization of the integrated biorefinery system design and also to the valorization of textile wastes. es_ES
dc.description.sponsorship This research was supported by the Ministry of Science, Innovation, and Universities (MICIU) through the AGL2015-63855-C2-1-R and MAT2017-84909-C2-2-R program numbers. L.Q.-C. wants to thank the Generalitat Valenciana (GVA) for his FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812). S.T.-G. is a recipient of a Juan de la Cierva Incorporación contract (IJCI-2016-29675) from MICIU. es_ES
dc.language Inglés es_ES
dc.publisher MDPI AG es_ES
dc.relation.ispartof International Journal of Molecular Sciences es_ES
dc.rights Reconocimiento (by) es_ES
dc.subject Bio-PET es_ES
dc.subject Cotton fibers es_ES
dc.subject Food packaging es_ES
dc.subject Biorefinery system design es_ES
dc.subject Waste valorization es_ES
dc.subject.classification INGENIERIA DE LOS PROCESOS DE FABRICACION es_ES
dc.subject.classification CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA es_ES
dc.subject.classification INGENIERIA MECANICA es_ES
dc.title Development of Sustainable and Cost-Competitive Injection-Molded Pieces of Partially Bio-Based Polyethylene Terephthalate through the Valorization of Cotton Textile Waste es_ES
dc.type Artículo es_ES
dc.identifier.doi 10.3390/ijms20061378 es_ES
dc.relation.projectID info:eu-repo/grantAgreement/MINECO//IJCI-2016-29675/ es_ES
dc.relation.projectID info:eu-repo/grantAgreement/MINECO//AGL2015-63855-C2-1-R/ES/DESARROLLO DE UN CONCEPTO DE ENVASE MULTICAPA ALIMENTARIO DE ALTA BARRERA Y CON CARACTER ACTIVO Y BIOACTIVO DERIVADO DE SUBPRODUCTOS ALIMENTARIOS/ es_ES
dc.relation.projectID info:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016/MAT2017-84909-C2-2-R/ES/PROCESADO Y OPTIMIZACION DE MATERIALES AVANZADOS DERIVADOS DE ESTRUCTURAS PROTEICAS Y COMPONENTES LIGNOCELULOSICOS/ es_ES
dc.relation.projectID info:eu-repo/grantAgreement/GVA//ACIF%2F2016%2F182/ es_ES
dc.relation.projectID info:eu-repo/grantAgreement/MECD//FPU15%2F03812/ES/FPU15%2F03812/ es_ES
dc.rights.accessRights Abierto es_ES
dc.contributor.affiliation Universitat Politècnica de València. Departamento de Ingeniería Mecánica y de Materiales - Departament d'Enginyeria Mecànica i de Materials es_ES
dc.contributor.affiliation Universitat Politècnica de València. Instituto de Tecnología de Materiales - Institut de Tecnologia de Materials es_ES
dc.description.bibliographicCitation Montava-Jordà, S.; Torres-Giner, S.; Ferrándiz Bou, S.; Quiles-Carrillo, L.; Montanes, N. (2019). Development of Sustainable and Cost-Competitive Injection-Molded Pieces of Partially Bio-Based Polyethylene Terephthalate through the Valorization of Cotton Textile Waste. International Journal of Molecular Sciences. 20(6):1-19. https://doi.org/10.3390/ijms20061378 es_ES
dc.description.accrualMethod S es_ES
dc.relation.publisherversion https://doi.org/10.3390/ijms20061378 es_ES
dc.description.upvformatpinicio 1 es_ES
dc.description.upvformatpfin 19 es_ES
dc.type.version info:eu-repo/semantics/publishedVersion es_ES
dc.description.volume 20 es_ES
dc.description.issue 6 es_ES
dc.identifier.eissn 1422-0067 es_ES
dc.identifier.pmid 30893806 es_ES
dc.identifier.pmcid PMC6471284 es_ES
dc.relation.pasarela S\382283 es_ES
dc.contributor.funder Generalitat Valenciana es_ES
dc.contributor.funder Ministerio de Economía y Competitividad es_ES
dc.contributor.funder Ministerio de Educación, Cultura y Deporte es_ES
dc.contributor.funder Agencia Estatal de Investigación es_ES
dc.description.references Tharanathan, R. . (2003). Biodegradable films and composite coatings: past, present and future. Trends in Food Science & Technology, 14(3), 71-78. doi:10.1016/s0924-2244(02)00280-7 es_ES
dc.description.references Plastics in a circular economyhttp://www.europarl.europa.eu/RegData/etudes/ATAG/2018/625163/EPRS_ATA(2018)625163_EN.pdf es_ES
dc.description.references Babu, R. P., O’Connor, K., & Seeram, R. (2013). Current progress on bio-based polymers and their future trends. Progress in Biomaterials, 2(1), 8. doi:10.1186/2194-0517-2-8 es_ES
dc.description.references Torres-Giner, S., Torres, A., Ferrándiz, M., Fombuena, V., & Balart, R. (2017). Antimicrobial activity of metal cation-exchanged zeolites and their evaluation on injection-molded pieces of bio-based high-density polyethylene. Journal of Food Safety, 37(4), e12348. doi:10.1111/jfs.12348 es_ES
dc.description.references Essabir, H., Bensalah, M. O., Rodrigue, D., Bouhfid, R., & Qaiss, A. (2016). Structural, mechanical and thermal properties of bio-based hybrid composites from waste coir residues: Fibers and shell particles. Mechanics of Materials, 93, 134-144. doi:10.1016/j.mechmat.2015.10.018 es_ES
dc.description.references Holbery, J., & Houston, D. (2006). Natural-fiber-reinforced polymer composites in automotive applications. JOM, 58(11), 80-86. doi:10.1007/s11837-006-0234-2 es_ES
dc.description.references Quiles-Carrillo, L., Montanes, N., Boronat, T., Balart, R., & Torres-Giner, S. (2017). Evaluation of the engineering performance of different bio-based aliphatic homopolyamide tubes prepared by profile extrusion. Polymer Testing, 61, 421-429. doi:10.1016/j.polymertesting.2017.06.004 es_ES
dc.description.references Chen, L., Pelton, R. E. O., & Smith, T. M. (2016). Comparative life cycle assessment of fossil and bio-based polyethylene terephthalate (PET) bottles. Journal of Cleaner Production, 137, 667-676. doi:10.1016/j.jclepro.2016.07.094 es_ES
dc.description.references Rosenboom, J.-G., Hohl, D. K., Fleckenstein, P., Storti, G., & Morbidelli, M. (2018). Bottle-grade polyethylene furanoate from ring-opening polymerisation of cyclic oligomers. Nature Communications, 9(1). doi:10.1038/s41467-018-05147-y es_ES
dc.description.references Monteiro, S. N., Lopes, F. P. D., Ferreira, A. S., & Nascimento, D. C. O. (2009). Natural-fiber polymer-matrix composites: Cheaper, tougher, and environmentally friendly. JOM, 61(1), 17-22. doi:10.1007/s11837-009-0004-z es_ES
dc.description.references Taha, I., & Ziegmann, G. (2006). A Comparison of Mechanical Properties of Natural Fiber Filled Biodegradable and Polyolefin Polymers. Journal of Composite Materials, 40(21), 1933-1946. doi:10.1177/0021998306061304 es_ES
dc.description.references European Bioplasticshttps://www.european-bioplastics.org/ es_ES
dc.description.references Shen, L., Worrell, E., & Patel, M. K. (2012). Comparing life cycle energy and GHG emissions of bio-based PET, recycled PET, PLA, and man-made cellulosics. Biofuels, Bioproducts and Biorefining, 6(6), 625-639. doi:10.1002/bbb.1368 es_ES
dc.description.references Tabone, M. D., Cregg, J. J., Beckman, E. J., & Landis, A. E. (2010). Sustainability Metrics: Life Cycle Assessment and Green Design in Polymers. Environmental Science & Technology, 44(21), 8264-8269. doi:10.1021/es101640n es_ES
dc.description.references Carus, M., Eder, A., & Beckmann, J. (2014). GreenPremium Prices Along the Value Chain of Biobased Products. Industrial Biotechnology, 10(2), 83-88. doi:10.1089/ind.2014.1512 es_ES
dc.description.references Mohanty, A. K., Misra, M., & Drzal, L. T. (2002). Journal of Polymers and the Environment, 10(1/2), 19-26. doi:10.1023/a:1021013921916 es_ES
dc.description.references Vollrath, F., & Porter, D. (2006). Spider silk as archetypal protein elastomer. Soft Matter, 2(5), 377. doi:10.1039/b600098n es_ES
dc.description.references Kelly, F. M., Johnston, J. H., Borrmann, T., & Richardson, M. J. (2008). Functionalised Hybrid Materials of Conducting Polymers with Individual Wool Fibers. Journal of Nanoscience and Nanotechnology, 8(4), 1965-1972. doi:10.1166/jnn.2008.040 es_ES
dc.description.references Farahani, G. N., Ahmad, I., & Mosadeghzad, Z. (2012). Effect of Fiber Content, Fiber Length and Alkali Treatment on Properties of Kenaf Fiber/UPR Composites Based on Recycled PET Wastes. Polymer-Plastics Technology and Engineering, 51(6), 634-639. doi:10.1080/03602559.2012.659314 es_ES
dc.description.references De Oliveira Santos, R. P., Castro, D. O., Ruvolo-Filho, A. C., & Frollini, E. (2014). Processing and thermal properties of composites based on recycled PET, sisal fibers, and renewable plasticizers. Journal of Applied Polymer Science, 131(12), n/a-n/a. doi:10.1002/app.40386 es_ES
dc.description.references Sena Neto, A. R., Araujo, M. A. M., Barboza, R. M. P., Fonseca, A. S., Tonoli, G. H. D., Souza, F. V. D., … Marconcini, J. M. (2015). Comparative study of 12 pineapple leaf fiber varieties for use as mechanical reinforcement in polymer composites. Industrial Crops and Products, 64, 68-78. doi:10.1016/j.indcrop.2014.10.042 es_ES
dc.description.references Anggraini, V., Asadi, A., Huat, B. B. K., & Nahazanan, H. (2015). Effects of coir fibers on tensile and compressive strength of lime treated soft soil. Measurement, 59, 372-381. doi:10.1016/j.measurement.2014.09.059 es_ES
dc.description.references Abdullah, N. M., & Ahmad, I. (2013). Potential of using polyester reinforced coconut fiber composites derived from recycling polyethylene terephthalate (PET) waste. Fibers and Polymers, 14(4), 584-590. doi:10.1007/s12221-013-0584-7 es_ES
dc.description.references Lei, Y., & Wu, Q. (2010). Wood plastic composites based on microfibrillar blends of high density polyethylene/poly(ethylene terephthalate). Bioresource Technology, 101(10), 3665-3671. doi:10.1016/j.biortech.2009.12.069 es_ES
dc.description.references Ozalp, M. (2010). Study of the effect of adding the powder of waste PET bottles and borax pentahydrate to the urea formaldehyde adhesive applied on plywood. European Journal of Wood and Wood Products, 69(3), 369-374. doi:10.1007/s00107-010-0439-5 es_ES
dc.description.references Ardekani, S. M., Dehghani, A., Al-Maadeed, M. A., Wahit, M. U., & Hassan, A. (2014). Mechanical and thermal properties of recycled poly(ethylene terephthalate) reinforced newspaper fiber composites. Fibers and Polymers, 15(7), 1531-1538. doi:10.1007/s12221-014-1531-y es_ES
dc.description.references Lou, C.-W., Lin, C.-W., Lei, C.-H., Su, K.-H., Hsu, C.-H., Liu, Z.-H., & Lin, J.-H. (2007). PET/PP blend with bamboo charcoal to produce functional composites. Journal of Materials Processing Technology, 192-193, 428-433. doi:10.1016/j.jmatprotec.2007.04.018 es_ES
dc.description.references Corradini, E., Ito, E. N., Marconcini, J. M., Rios, C. T., Agnelli, J. A. M., & Mattoso, L. H. C. (2009). Interfacial behavior of composites of recycled poly(ethyelene terephthalate) and sugarcane bagasse fiber. Polymer Testing, 28(2), 183-187. doi:10.1016/j.polymertesting.2008.11.014 es_ES
dc.description.references Chen, R. S., Ab Ghani, M. H., Ahmad, S., Salleh, M. N., & Tarawneh, M. A. (2014). Rice husk flour biocomposites based on recycled high-density polyethylene/polyethylene terephthalate blend: effect of high filler loading on physical, mechanical and thermal properties. Journal of Composite Materials, 49(10), 1241-1253. doi:10.1177/0021998314533361 es_ES
dc.description.references Kim, S. S., Kim, J., Huang, T. S., Whang, H. S., & Lee, J. (2009). Antimicrobial polyethylene terephthalate (PET) treated with an aromaticN-halamine precursor,m-aramid. Journal of Applied Polymer Science, 114(6), 3835-3840. doi:10.1002/app.31016 es_ES
dc.description.references Friedrich, K. (1985). Microstructural efficiency and fracture toughness of short fiber/thermoplastic matrix composites. Composites Science and Technology, 22(1), 43-74. doi:10.1016/0266-3538(85)90090-9 es_ES
dc.description.references Fung, K. L., & Li, R. K. Y. (2006). Mechanical properties of short glass fibre reinforced and functionalized rubber-toughened PET blends. Polymer Testing, 25(7), 923-931. doi:10.1016/j.polymertesting.2006.05.013 es_ES
dc.description.references Li, Z., Luo, G., Wei, F., & Huang, Y. (2006). Microstructure of carbon nanotubes/PET conductive composites fibers and their properties. Composites Science and Technology, 66(7-8), 1022-1029. doi:10.1016/j.compscitech.2005.08.006 es_ES
dc.description.references Quiles-Carrillo, L., Montanes, N., Sammon, C., Balart, R., & Torres-Giner, S. (2018). Compatibilization of highly sustainable polylactide/almond shell flour composites by reactive extrusion with maleinized linseed oil. Industrial Crops and Products, 111, 878-888. doi:10.1016/j.indcrop.2017.10.062 es_ES
dc.description.references Quiles-Carrillo, L., Montanes, N., Garcia-Garcia, D., Carbonell-Verdu, A., Balart, R., & Torres-Giner, S. (2018). Effect of different compatibilizers on injection-molded green composite pieces based on polylactide filled with almond shell flour. Composites Part B: Engineering, 147, 76-85. doi:10.1016/j.compositesb.2018.04.017 es_ES
dc.description.references George, M., Chae, M., & Bressler, D. C. (2016). Composite materials with bast fibres: Structural, technical, and environmental properties. Progress in Materials Science, 83, 1-23. doi:10.1016/j.pmatsci.2016.04.002 es_ES
dc.description.references Natural Fibre Demand Risinghttp://cottonanalytics.com/natural-fibre-demand-rising/ es_ES
dc.description.references Peña-Pichardo, P., Martínez-Barrera, G., Martínez-López, M., Ureña-Núñez, F., & dos Reis, J. M. L. (2018). Recovery of cotton fibers from waste Blue-Jeans and its use in polyester concrete. Construction and Building Materials, 177, 409-416. doi:10.1016/j.conbuildmat.2018.05.137 es_ES
dc.description.references Mohanty, A. K., Misra, M., & Hinrichsen, G. (2000). Biofibres, biodegradable polymers and biocomposites: An overview. Macromolecular Materials and Engineering, 276-277(1), 1-24. doi:10.1002/(sici)1439-2054(20000301)276:1<1::aid-mame1>3.0.co;2-w es_ES
dc.description.references Bayer, F. L. (2002). Polyethylene terephthalate recycling for food-contact applications: testing, safety and technologies: a global perspective. Food Additives & Contaminants, 19(sup1), 111-134. doi:10.1080/02652030110083694 es_ES
dc.description.references Zou, Y., Reddy, N., & Yang, Y. (2011). Reusing polyester/cotton blend fabrics for composites. Composites Part B: Engineering, 42(4), 763-770. doi:10.1016/j.compositesb.2011.01.022 es_ES
dc.description.references Oromiehie, A., & Mamizadeh, A. (2004). Recycling PET beverage bottles and improving properties. Polymer International, 53(6), 728-732. doi:10.1002/pi.1389 es_ES
dc.description.references Elamri, A., Lallam, A., Harzallah, O., & Bencheikh, L. (2007). Mechanical characterization of melt spun fibers from recycled and virgin PET blends. Journal of Materials Science, 42(19), 8271-8278. doi:10.1007/s10853-007-1590-1 es_ES
dc.description.references Torres-Giner, S., Hilliou, L., Melendez-Rodriguez, B., Figueroa-Lopez, K. J., Madalena, D., Cabedo, L., … Lagaron, J. M. (2018). Melt processability, characterization, and antibacterial activity of compression-molded green composite sheets made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) reinforced with coconut fibers impregnated with oregano essential oil. Food Packaging and Shelf Life, 17, 39-49. doi:10.1016/j.fpsl.2018.05.002 es_ES
dc.description.references Wambua, P., Ivens, J., & Verpoest, I. (2003). Natural fibres: can they replace glass in fibre reinforced plastics? Composites Science and Technology, 63(9), 1259-1264. doi:10.1016/s0266-3538(03)00096-4 es_ES
dc.description.references Thwe, M. M., & Liao, K. (2002). Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid composites. Composites Part A: Applied Science and Manufacturing, 33(1), 43-52. doi:10.1016/s1359-835x(01)00071-9 es_ES
dc.description.references Baley, C., Busnel, F., Grohens, Y., & Sire, O. (2006). Influence of chemical treatments on surface properties and adhesion of flax fibre–polyester resin. Composites Part A: Applied Science and Manufacturing, 37(10), 1626-1637. doi:10.1016/j.compositesa.2005.10.014 es_ES
dc.description.references Valadez-Gonzalez, A., Cervantes-Uc, J. M., Olayo, R., & Herrera-Franco, P. J. (1999). Effect of fiber surface treatment on the fiber–matrix bond strength of natural fiber reinforced composites. Composites Part B: Engineering, 30(3), 309-320. doi:10.1016/s1359-8368(98)00054-7 es_ES
dc.description.references Strömbro, J., & Gudmundson, P. (2008). An anisotropic fibre-network model for mechano-sorptive creep in paper. International Journal of Solids and Structures, 45(22-23), 5765-5787. doi:10.1016/j.ijsolstr.2008.06.010 es_ES
dc.description.references Dunne, R., Desai, D., & Sadiku, R. (2017). Material characterization of blended sisal-kenaf composites with an ABS matrix. Applied Acoustics, 125, 184-193. doi:10.1016/j.apacoust.2017.03.022 es_ES
dc.description.references Pereira, L. M., Corrêa, A. C., Souza Filho, M. de sá M. de, Rosa, M. de F., & Ito, E. N. (2017). Rheological, Morphological and Mechanical Characterization of Recycled Poly (Ethylene Terephthalate) Blends and Composites. Materials Research, 20(3), 791-800. doi:10.1590/1980-5373-mr-2016-0870 es_ES
dc.description.references Torres-Giner, S., Montanes, N., Fombuena, V., Boronat, T., & Sanchez-Nacher, L. (2016). Preparation and characterization of compression-molded green composite sheets made of poly(3-hydroxybutyrate) reinforced with long pita fibers. Advances in Polymer Technology, 37(5), 1305-1315. doi:10.1002/adv.21789 es_ES
dc.description.references Kim, S.-J., Moon, J.-B., Kim, G.-H., & Ha, C.-S. (2008). Mechanical properties of polypropylene/natural fiber composites: Comparison of wood fiber and cotton fiber. Polymer Testing, 27(7), 801-806. doi:10.1016/j.polymertesting.2008.06.002 es_ES
dc.description.references Kant, R. (2012). Textile dyeing industry an environmental hazard. Natural Science, 04(01), 22-26. doi:10.4236/ns.2012.41004 es_ES
dc.description.references Dehghani, A., Madadi Ardekani, S., Al-Maadeed, M. A., Hassan, A., & Wahit, M. U. (2013). Mechanical and thermal properties of date palm leaf fiber reinforced recycled poly (ethylene terephthalate) composites. Materials & Design (1980-2015), 52, 841-848. doi:10.1016/j.matdes.2013.06.022 es_ES
dc.description.references Hristov, V., & Vasileva, S. (2003). Dynamic Mechanical and Thermal Properties of Modified Poly(propylene) Wood Fiber Composites. Macromolecular Materials and Engineering, 288(10), 798-806. doi:10.1002/mame.200300110 es_ES
dc.description.references Wang, Y., Gao, J., Ma, Y., & Agarwal, U. S. (2006). Study on mechanical properties, thermal stability and crystallization behavior of PET/MMT nanocomposites. Composites Part B: Engineering, 37(6), 399-407. doi:10.1016/j.compositesb.2006.02.014 es_ES
dc.description.references Ke, Y.-C., Wu, T.-B., & Xia, Y.-F. (2007). The nucleation, crystallization and dispersion behavior of PET–monodisperse SiO2 composites. Polymer, 48(11), 3324-3336. doi:10.1016/j.polymer.2007.03.059 es_ES
dc.description.references Blundell, D. J. (1987). On the interpretation of multiple melting peaks in poly(ether ether ketone). Polymer, 28(13), 2248-2251. doi:10.1016/0032-3861(87)90382-x es_ES
dc.description.references Yasuniwa, M., Sakamo, K., Ono, Y., & Kawahara, W. (2008). Melting behavior of poly(l-lactic acid): X-ray and DSC analyses of the melting process. Polymer, 49(7), 1943-1951. doi:10.1016/j.polymer.2008.02.034 es_ES
dc.description.references Kong, Y., & Hay, J. . (2003). Multiple melting behaviour of poly(ethylene terephthalate). Polymer, 44(3), 623-633. doi:10.1016/s0032-3861(02)00814-5 es_ES
dc.description.references Varga, J. (1995). Interfacial morphologies in carbon fibre-reinforced polypropylene microcomposites. Polymer, 36(25), 4877-4881. doi:10.1016/00323-8619(59)9305e- es_ES
dc.description.references De Souza, A. M. C., & Caldeira, C. B. (2015). An investigation on recycled PET/PP and recycled PET/PP-EP compatibilized blends: Rheological, morphological, and mechanical properties. Journal of Applied Polymer Science, 132(17). doi:10.1002/app.41892 es_ES
dc.description.references Gangil, S., & Bhargav, V. K. (2018). Influence of torrefaction on intrinsic bioconstituents of cotton stalk: TG-insights. Energy, 142, 1066-1073. doi:10.1016/j.energy.2017.10.128 es_ES
dc.description.references Dan-mallam Yakubu, Abdullah, M. Z., & Yusoff, P. S. M. M. (2013). Mechanical properties of recycled kenaf/polyethylene terephthalate (PET) fiber reinforced polyoxymethylene (POM) hybrid composite. Journal of Applied Polymer Science, 131(3), n/a-n/a. doi:10.1002/app.39831 es_ES
dc.description.references Nurul Fazita, M. R., Jayaraman, K., Bhattacharyya, D., Mohamad Haafiz, M. K., Saurabh, C., Hussin, M., & H.P.S., A. (2016). Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications—A Review. Materials, 9(6), 435. doi:10.3390/ma9060435 es_ES
dc.description.references Alongi, J., Camino, G., & Malucelli, G. (2013). Heating rate effect on char yield from cotton, poly(ethylene terephthalate) and blend fabrics. Carbohydrate Polymers, 92(2), 1327-1334. doi:10.1016/j.carbpol.2012.10.029 es_ES
dc.description.references Alongi, J., Carosio, F., & Malucelli, G. (2012). Influence of ammonium polyphosphate-/poly(acrylic acid)-based layer by layer architectures on the char formation in cotton, polyester and their blends. Polymer Degradation and Stability, 97(9), 1644-1653. doi:10.1016/j.polymdegradstab.2012.06.025 es_ES
dc.description.references Levchik, S. V., & Weil, E. D. (2004). A review on thermal decomposition and combustion of thermoplastic polyesters. Polymers for Advanced Technologies, 15(12), 691-700. doi:10.1002/pat.526 es_ES
dc.description.references Hujuri, U., Ghoshal, A. K., & Gumma, S. (2013). Temperature-dependent pyrolytic product evolution profile for polyethylene terephthalate. Journal of Applied Polymer Science, n/a-n/a. doi:10.1002/app.39681 es_ES
dc.description.references Candan, Z., Gardner, D. J., & Shaler, S. M. (2016). Dynamic mechanical thermal analysis (DMTA) of cellulose nanofibril/nanoclay/pMDI nanocomposites. Composites Part B: Engineering, 90, 126-132. doi:10.1016/j.compositesb.2015.12.016 es_ES
dc.description.references Marques, M. F. V., Lunz, J. N., Aguiar, V. O., Grafova, I., Kemell, M., Visentin, F., … Grafov, A. (2014). Thermal and Mechanical Properties of Sustainable Composites Reinforced with Natural Fibers. Journal of Polymers and the Environment, 23(2), 251-260. doi:10.1007/s10924-014-0687-2 es_ES
dc.description.references Torres-Giner, S., Montanes, N., Fenollar, O., García-Sanoguera, D., & Balart, R. (2016). Development and optimization of renewable vinyl plastisol/wood flour composites exposed to ultraviolet radiation. Materials & Design, 108, 648-658. doi:10.1016/j.matdes.2016.07.037 es_ES
dc.description.references Negoro, T., Thodsaratpreeyakul, W., Takada, Y., Thumsorn, S., Inoya, H., & Hamada, H. (2016). Role of Crystallinity on Moisture Absorption and Mechanical Performance of Recycled PET Compounds. Energy Procedia, 89, 323-327. doi:10.1016/j.egypro.2016.05.042 es_ES
dc.description.references Badía, J. D., Vilaplana, F., Karlsson, S., & Ribes-Greus, A. (2009). Thermal analysis as a quality tool for assessing the influence of thermo-mechanical degradation on recycled poly(ethylene terephthalate). Polymer Testing, 28(2), 169-175. doi:10.1016/j.polymertesting.2008.11.010 es_ES


Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem