- -

Modelling Type 1 and 2 Wind Turbines based on IEC 61400-27-1: Transient Response under Voltage Dips

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

  • Estadisticas de Uso

Modelling Type 1 and 2 Wind Turbines based on IEC 61400-27-1: Transient Response under Voltage Dips

Mostrar el registro completo del ítem

García-Sánchez, TM.; Muñoz-Benavente, I.; Gómez-Lázaro, E.; Fernández-Guillamón, A. (2020). Modelling Type 1 and 2 Wind Turbines based on IEC 61400-27-1: Transient Response under Voltage Dips. Energies. 13(16):1-19. https://doi.org/10.3390/en13164078

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/167460

Ficheros en el ítem

Metadatos del ítem

Título: Modelling Type 1 and 2 Wind Turbines based on IEC 61400-27-1: Transient Response under Voltage Dips
Autor: García-Sánchez, Tania María Muñoz-Benavente, Irene Gómez-Lázaro, Emilio Fernández-Guillamón, Ana
Entidad UPV: Universitat Politècnica de València. Departamento de Ingeniería Eléctrica - Departament d'Enginyeria Elèctrica
Fecha difusión:
Resumen:
[EN] Wind power plants depend greatly on weather conditions, thus being considered intermittent, uncertain and non-dispatchable. Due to the massive integration of this energy resource in the recent decades, it is important ...[+]
Palabras clave: IEC 61400-27 , Power system stability , Generic model , Wind turbine , Voltage dip
Derechos de uso: Reconocimiento (by)
Fuente:
Energies. (eissn: 1996-1073 )
DOI: 10.3390/en13164078
Editorial:
MDPI AG
Versión del editor: https://doi.org/10.3390/en13164078
Código del Proyecto:
info:eu-repo/grantAgreement/MINECO//ENE2016-78214-C2-2-R/
info:eu-repo/grantAgreement/MECD//FPU16%2F04282/ES/FPU16%2F04282/
Agradecimientos:
This work was partially supported by the Spanish Ministry of Economy and Competitiveness and the European Union -FEDER Funds, ENE2016-78214-C2-1-R-; and the Spanish Ministry of Education, Culture and Sports -ref. FPU16/04282-.[+]
Tipo: Artículo

References

Fernández-Guillamón, A., Villena-Lapaz, J., Vigueras-Rodríguez, A., García-Sánchez, T., & Molina-García, Á. (2018). An Adaptive Frequency Strategy for Variable Speed Wind Turbines: Application to High Wind Integration Into Power Systems. Energies, 11(6), 1436. doi:10.3390/en11061436

Fernández-Guillamón, A., Das, K., Cutululis, N. A., & Molina-García, Á. (2019). Offshore Wind Power Integration into Future Power Systems: Overview and Trends. Journal of Marine Science and Engineering, 7(11), 399. doi:10.3390/jmse7110399

Fernández-Guillamón, A., Gómez-Lázaro, E., Muljadi, E., & Molina-García, Á. (2019). Power systems with high renewable energy sources: A review of inertia and frequency control strategies over time. Renewable and Sustainable Energy Reviews, 115, 109369. doi:10.1016/j.rser.2019.109369 [+]
Fernández-Guillamón, A., Villena-Lapaz, J., Vigueras-Rodríguez, A., García-Sánchez, T., & Molina-García, Á. (2018). An Adaptive Frequency Strategy for Variable Speed Wind Turbines: Application to High Wind Integration Into Power Systems. Energies, 11(6), 1436. doi:10.3390/en11061436

Fernández-Guillamón, A., Das, K., Cutululis, N. A., & Molina-García, Á. (2019). Offshore Wind Power Integration into Future Power Systems: Overview and Trends. Journal of Marine Science and Engineering, 7(11), 399. doi:10.3390/jmse7110399

Fernández-Guillamón, A., Gómez-Lázaro, E., Muljadi, E., & Molina-García, Á. (2019). Power systems with high renewable energy sources: A review of inertia and frequency control strategies over time. Renewable and Sustainable Energy Reviews, 115, 109369. doi:10.1016/j.rser.2019.109369

Cardozo, C., van Ackooij, W., & Capely, L. (2018). Cutting plane approaches for frequency constrained economic dispatch problems. Electric Power Systems Research, 156, 54-63. doi:10.1016/j.epsr.2017.11.001

Fernández-Guillamón, A., Martínez-Lucas, G., Molina-García, Á., & Sarasua, J. I. (2020). An Adaptive Control Scheme for Variable Speed Wind Turbines Providing Frequency Regulation in Isolated Power Systems with Thermal Generation. Energies, 13(13), 3369. doi:10.3390/en13133369

Global Wind Report 2019https://gwec.net/global-wind-report-2019/

Muñoz-Benavente, I., Hansen, A. D., Gómez-Lázaro, E., García-Sánchez, T., Fernández-Guillamón, A., & Molina-García, Á. (2019). Impact of Combined Demand-Response and Wind Power Plant Participation in Frequency Control for Multi-Area Power Systems. Energies, 12(9), 1687. doi:10.3390/en12091687

Villena-Ruiz, R., Lorenzo-Bonache, A., Honrubia-Escribano, A., Jiménez-Buendía, F., & Gómez-Lázaro, E. (2019). Implementation of IEC 61400-27-1 Type 3 Model: Performance Analysis under Different Modeling Approaches. Energies, 12(14), 2690. doi:10.3390/en12142690

Kumar, D., & Chatterjee, K. (2016). A review of conventional and advanced MPPT algorithms for wind energy systems. Renewable and Sustainable Energy Reviews, 55, 957-970. doi:10.1016/j.rser.2015.11.013

Hansen, A. D., Iov, F., Blaabjerg, F., & Hansen, L. H. (2004). Review of Contemporary Wind Turbine Concepts and Their Market Penetration. Wind Engineering, 28(3), 247-263. doi:10.1260/0309524041590099

Liang, X. (2017). Emerging Power Quality Challenges Due to Integration of Renewable Energy Sources. IEEE Transactions on Industry Applications, 53(2), 855-866. doi:10.1109/tia.2016.2626253

Calif, R., & Schmitt, F. G. (2014). Multiscaling and joint multiscaling description of the atmospheric wind speed and the aggregate power output from a wind farm. Nonlinear Processes in Geophysics, 21(2), 379-392. doi:10.5194/npg-21-379-2014

Calif, R., Schmitt, F. G., & Huang, Y. (2013). Multifractal description of wind power fluctuations using arbitrary order Hilbert spectral analysis. Physica A: Statistical Mechanics and its Applications, 392(18), 4106-4120. doi:10.1016/j.physa.2013.04.038

Fernández‐Guillamón, A., Vigueras‐Rodríguez, A., & Molina‐García, Á. (2019). Analysis of power system inertia estimation in high wind power plant integration scenarios. IET Renewable Power Generation, 13(15), 2807-2816. doi:10.1049/iet-rpg.2019.0220

Heredia, F.-J., Cuadrado, M. D., & Corchero, C. (2018). On optimal participation in the electricity markets of wind power plants with battery energy storage systems. Computers & Operations Research, 96, 316-329. doi:10.1016/j.cor.2018.03.004

Zhang, W., & Fang, K. (2017). Controlling active power of wind farms to participate in load frequency control of power systems. IET Generation, Transmission & Distribution, 11(9), 2194-2203. doi:10.1049/iet-gtd.2016.1471

Honrubia-Escribano, A., Gómez-Lázaro, E., Fortmann, J., Sørensen, P., & Martin-Martinez, S. (2018). Generic dynamic wind turbine models for power system stability analysis: A comprehensive review. Renewable and Sustainable Energy Reviews, 81, 1939-1952. doi:10.1016/j.rser.2017.06.005

Moschitta, A., Carbone, P., & Muscas, C. (2011). Generalized Likelihood Ratio Test for Voltage Dip Detection. IEEE Transactions on Instrumentation and Measurement, 60(5), 1644-1653. doi:10.1109/tim.2011.2113110

Moschitta, A., Carbone, P., & Muscas, C. (2012). Performance Comparison of Advanced Techniques for Voltage Dip Detection. IEEE Transactions on Instrumentation and Measurement, 61(5), 1494-1502. doi:10.1109/tim.2012.2183436

Gallo, D., Landi, C., Luiso, M., & Fiorucci, E. (2014). Survey on Voltage Dip Measurements in Standard Framework. IEEE Transactions on Instrumentation and Measurement, 63(2), 374-387. doi:10.1109/tim.2013.2278996

Ipinnimo, O., Chowdhury, S., Chowdhury, S. P., & Mitra, J. (2013). A review of voltage dip mitigation techniques with distributed generation in electricity networks. Electric Power Systems Research, 103, 28-36. doi:10.1016/j.epsr.2013.05.004

Hossain, M. J., Pota, H. R., Ugrinovskii, V. A., & Ramos, R. A. (2010). Simultaneous STATCOM and Pitch Angle Control for Improved LVRT Capability of Fixed-Speed Wind Turbines. IEEE Transactions on Sustainable Energy, 1(3), 142-151. doi:10.1109/tste.2010.2054118

Hossain, M. J., Pota, H. R., & Ramos, R. A. (2011). Robust STATCOM control for the stabilisation of fixed-speed wind turbines during low voltages. Renewable Energy, 36(11), 2897-2905. doi:10.1016/j.renene.2011.04.010

Hossain, M. J., Pota, H. R., & Ramos, R. A. (2012). Improved low-voltage-ride-through capability of fixed-speed wind turbines using decentralised control of STATCOM with energy storage system. IET Generation, Transmission & Distribution, 6(8), 719. doi:10.1049/iet-gtd.2011.0537

Wessels, C., Hoffmann, N., Molinas, M., & Fuchs, F. W. (2013). StatCom control at wind farms with fixed-speed induction generators under asymmetrical grid faults. IEEE Transactions on Industrial Electronics, 60(7), 2864-2873. doi:10.1109/tie.2012.2233694

Obando-Montaño, A., Carrillo, C., Cidrás, J., & Díaz-Dorado, E. (2014). A STATCOM with Supercapacitors for Low-Voltage Ride-Through in Fixed-Speed Wind Turbines. Energies, 7(9), 5922-5952. doi:10.3390/en7095922

Moghadasi, A., Sarwat, A., & Guerrero, J. M. (2016). A comprehensive review of low-voltage-ride-through methods for fixed-speed wind power generators. Renewable and Sustainable Energy Reviews, 55, 823-839. doi:10.1016/j.rser.2015.11.020

Heydari-doostabad, H., Khalghani, M. R., & Khooban, M. H. (2016). A novel control system design to improve LVRT capability of fixed speed wind turbines using STATCOM in presence of voltage fault. International Journal of Electrical Power & Energy Systems, 77, 280-286. doi:10.1016/j.ijepes.2015.11.011

Fortmann, J., Engelhardt, S., Kretschmann, J., Feltes, C., & Erlich, I. (2014). New Generic Model of DFG-Based Wind Turbines for RMS-Type Simulation. IEEE Transactions on Energy Conversion, 29(1), 110-118. doi:10.1109/tec.2013.2287251

Goksu, O., Altin, M., Fortmann, J., & Sorensen, P. E. (2016). Field Validation of IEC 61400-27-1 Wind Generation Type 3 Model With Plant Power Factor Controller. IEEE Transactions on Energy Conversion, 31(3), 1170-1178. doi:10.1109/tec.2016.2540006

Honrubia-Escribano, A., Jiménez-Buendía, F., Gómez-Lázaro, E., & Fortmann, J. (2016). Validation of Generic Models for Variable Speed Operation Wind Turbines Following the Recent Guidelines Issued by IEC 61400-27. Energies, 9(12), 1048. doi:10.3390/en9121048

Honrubia-Escribano, A., Jimenez-Buendia, F., Gomez-Lazaro, E., & Fortmann, J. (2018). Field Validation of a Standard Type 3 Wind Turbine Model for Power System Stability, According to the Requirements Imposed by IEC 61400-27-1. IEEE Transactions on Energy Conversion, 33(1), 137-145. doi:10.1109/tec.2017.2737703

Lorenzo-Bonache, A., Honrubia-Escribano, A., Jiménez-Buendía, F., Molina-García, Á., & Gómez-Lázaro, E. (2017). Generic Type 3 Wind Turbine Model Based on IEC 61400-27-1: Parameter Analysis and Transient Response under Voltage Dips. Energies, 10(9), 1441. doi:10.3390/en10091441

Honrubia-Escribano, A., Jiménez-Buendía, F., Sosa-Avendaño, J. L., Gartmann, P., Frahm, S., Fortmann, J., … Gómez-Lázaro, E. (2019). Fault-Ride Trough Validation of IEC 61400-27-1 Type 3 and Type 4 Models of Different Wind Turbine Manufacturers. Energies, 12(16), 3039. doi:10.3390/en12163039

Wang, L., Zhang, Z., Long, H., Xu, J., & Liu, R. (2017). Wind Turbine Gearbox Failure Identification With Deep Neural Networks. IEEE Transactions on Industrial Informatics, 13(3), 1360-1368. doi:10.1109/tii.2016.2607179

Hansen, A. D., & Hansen, L. H. (2007). Wind turbine concept market penetration over 10 years (1995–2004). Wind Energy, 10(1), 81-97. doi:10.1002/we.210

IEC 61400-27-1. Electrical Simulation Models—Wind Turbines; Technical Reporthttps://webstore.iec.ch/publication/21811

Vázquez-Hernández, C., Serrano-González, J., & Centeno, G. (2017). A Market-Based Analysis on the Main Characteristics of Gearboxes Used in Onshore Wind Turbines. Energies, 10(11), 1686. doi:10.3390/en10111686

Duong, M., Grimaccia, F., Leva, S., Mussetta, M., & Le, K. (2015). Improving Transient Stability in a Grid-Connected Squirrel-Cage Induction Generator Wind Turbine System Using a Fuzzy Logic Controller. Energies, 8(7), 6328-6349. doi:10.3390/en8076328

Cheng, M., & Zhu, Y. (2014). The state of the art of wind energy conversion systems and technologies: A review. Energy Conversion and Management, 88, 332-347. doi:10.1016/j.enconman.2014.08.037

Pinar Pérez, J. M., García Márquez, F. P., Tobias, A., & Papaelias, M. (2013). Wind turbine reliability analysis. Renewable and Sustainable Energy Reviews, 23, 463-472. doi:10.1016/j.rser.2013.03.018

Sumathi, S., Ashok Kumar, L., & Surekha, P. (2015). Wind Energy Conversion Systems. Green Energy and Technology, 247-307. doi:10.1007/978-3-319-14941-7_4

Fernández-Guillamón, A., Sarasúa, J. I., Chazarra, M., Vigueras-Rodríguez, A., Fernández-Muñoz, D., & Molina-García, Á. (2020). Frequency control analysis based on unit commitment schemes with high wind power integration: A Spanish isolated power system case study. International Journal of Electrical Power & Energy Systems, 121, 106044. doi:10.1016/j.ijepes.2020.106044

Liu, J., Gao, Y., Geng, S., & Wu, L. (2017). Nonlinear Control of Variable Speed Wind Turbines via Fuzzy Techniques. IEEE Access, 5, 27-34. doi:10.1109/access.2016.2599542

Margaris, I. D., Hansen, A. D., Sørensen, P., & Hatziargyriou, N. D. (2010). Illustration of Modern Wind Turbine Ancillary Services. Energies, 3(6), 1290-1302. doi:10.3390/en3061290

Wan, S., Cheng, K., Sheng, X., & Wang, X. (2019). Characteristic Analysis of DFIG Wind Turbine under Blade Mass Imbalance Fault in View of Wind Speed Spatiotemporal Distribution. Energies, 12(16), 3178. doi:10.3390/en12163178

Boukhezzar, B., & Siguerdidjane, H. (2011). Nonlinear Control of a Variable-Speed Wind Turbine Using a Two-Mass Model. IEEE Transactions on Energy Conversion, 26(1), 149-162. doi:10.1109/tec.2010.2090155

Chu, Yuan, Hu, Pan, & Pan. (2019). Comparative Analysis of Identification Methods for Mechanical Dynamics of Large-Scale Wind Turbine. Energies, 12(18), 3429. doi:10.3390/en12183429

Villena-Ruiz, R., Honrubia-Escribano, A., Fortmann, J., & Gómez-Lázaro, E. (2020). Field validation of a standard Type 3 wind turbine model implemented in DIgSILENT-PowerFactory following IEC 61400-27-1 guidelines. International Journal of Electrical Power & Energy Systems, 116, 105553. doi:10.1016/j.ijepes.2019.105553

Ekanayake, J. B., Holdsworth, L., & Jenkins, N. (2003). Comparison of 5th order and 3rd order machine models for doubly fed induction generator (DFIG) wind turbines. Electric Power Systems Research, 67(3), 207-215. doi:10.1016/s0378-7796(03)00109-3

Brandl, R. (2017). Operational Range of Several Interface Algorithms for Different Power Hardware-In-The-Loop Setups. Energies, 10(12), 1946. doi:10.3390/en10121946

Matar, M., Karimi, H., Etemadi, A., & Iravani, R. (2012). A High Performance Real-Time Simulator for Controllers Hardware-in-the-Loop Testing. Energies, 5(6), 1713-1733. doi:10.3390/en5061713

[-]

recommendations

 

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem