Total Oxidation of Propane Using CeO2 and CuO-CeO2 Catalysts Prepared Using Templates of Different Nature

Abstract

[EN] Several CeO2 and CuO-CeO2 catalysts were prepared using different methods, i.e., a homogeneous precipitation with urea, a nanocasting route using CMK-3 carbon as a hard template and a sol¿gel process using Poly(methyl methacrylate) (PMMA) polymer as a soft template, and tested in the total oxidation of propane. The catalysts were characterized by a number of physicochemical techniques (XRD, N2 adsorption, TPR, XPS, Raman spectroscopy) showing distinct characteristics. For each series, Cu-Ce-O catalysts with low Cu-loadings (5 wt % CuO) showed the highest activity, higher than those samples either without copper or with high Cu-loading (13 wt % CuO). The incorporation of copper leads to an increase of the concentration of bulk defects but if the Cu-loading is too high the surface area drastically falls. The highest activity in the total oxidation of propane was achieved by Cu-containing ceria catalysts synthesized using a polymer as a template, as this method yields high surface area materials. The surface area and the number of bulk/sub-surface defects of the ceria seem to be the main properties determining the catalytic activity