- -

Influence of an ERNiCrMo-3 root pass on the properties of cast iron weld joints

RiuNet: Institutional repository of the Polithecnic University of Valencia

Share/Send to

Cited by

Statistics

Influence of an ERNiCrMo-3 root pass on the properties of cast iron weld joints

Show full item record

Pascual Guillamón, M.; Cárcel Carrasco, FJ.; Pérez Puig, MA.; Salas Vicente, F. (2018). Influence of an ERNiCrMo-3 root pass on the properties of cast iron weld joints. Revista de Metalurgia. 54(3):122-130. https://doi.org/10.3989/revmetalm.122

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/121795

Files in this item

Item Metadata

Title: Influence of an ERNiCrMo-3 root pass on the properties of cast iron weld joints
Secondary Title: Influencia de la soldadura de raíz con ERNiCrMo-3 en las propiedades de las uniones soldadas de fundición nodular
Author: Pascual Guillamón, Manuel Cárcel Carrasco, Francisco Javier Pérez Puig, Miguel Angel Salas Vicente, Fidel
UPV Unit: Universitat Politècnica de València. Departamento de Ingeniería Mecánica y de Materiales - Departament d'Enginyeria Mecànica i de Materials
Universitat Politècnica de València. Departamento de Construcciones Arquitectónicas - Departament de Construccions Arquitectòniques
Issued date:
Abstract:
[EN] This article studies the effect of an ERNiCrMo- 3 GTAW root pass on the microstructure and mechanical properties of a nodular cast iron joint when the cover passes are made using the SMAW technique and with Ni electrodes. ...[+]


[ES] Este artículo estudia el efecto de la soldadura de raíz (GTAW) con ERNiCrMo-3 sobre la microestructura y propiedades mecánicas de una unión de fundición nodular cuando las pasadas de la cubierta se realizan con la ...[+]
Subjects: Cast iron joint , Heat treatment , Mechanical properties , SMAW technique
Copyrigths: Reconocimiento (by)
Source:
Revista de Metalurgia. (issn: 0034-8570 )
DOI: 10.3989/revmetalm.122
Publisher:
Departmento de Publicaciones del CSIC
Publisher version: https://doi.org/10.3989/revmetalm.122
Type: Artículo

References

Arabi Jeshvaghani, R., Jaberzadeh, M., Zohdi, H., Shamanian, M. (2014). Microstructural study and wear behavior of ductile iron surface alloyed by inconel 617. Mater. Design 54, 491–497.

Castolin (1993). Eutectic Castolin: Practice Handbook (Spanish Edition). Ed. Castolin Espa-a, SA Madrid, pp. 64. https://www.castolin.com/es-ES/publications.

Cembrero, J., Pascual, M. (1999). Soldabilidad de las fundiciones de grafito esferoidal. Rev. Metal. 35 (6), 392–401. [+]
Arabi Jeshvaghani, R., Jaberzadeh, M., Zohdi, H., Shamanian, M. (2014). Microstructural study and wear behavior of ductile iron surface alloyed by inconel 617. Mater. Design 54, 491–497.

Castolin (1993). Eutectic Castolin: Practice Handbook (Spanish Edition). Ed. Castolin Espa-a, SA Madrid, pp. 64. https://www.castolin.com/es-ES/publications.

Cembrero, J., Pascual, M. (1999). Soldabilidad de las fundiciones de grafito esferoidal. Rev. Metal. 35 (6), 392–401.

El-Banna, E. (1999). Effect of preheat on welding of ductile cast iron. Mater. Lett. 41 (1), 20–26.

El-Banna, E.M., Nageda, M.S., El-Saadat, M.A. (2000). Study of restoration by welding of pearlitic ductile cast iron. Mater. Lett. 42 (5), 311–320.

Huke, E.E., Udin, H. (1953). Welding metallurgy of nodular cast iron. Weld. J. 32 (8), 378s–385s.

Kiser, D., Faws, P.E., Northey, M. (2005). Welding Cast Iron. Fall 2005, Canadian Welding Association Journal, pp. 1–4. http://selector.specialmetalswelding.com/publica/cwafall2005.pdf.

Martínez, R.A., Sikora, J.A. (1995). Pearlitic Nodular Cast Iron: Can It Be Welded?. Weld. J. 74 (3), 63–73.

Pascual, M., Cembrero, J., Salas, F., Pascual Martínez, M. (2008). Analysis of the weldability of ductile iron. Mater. Lett. 62 (8-9), 1359–1362.

Pease, G.R. (1960). The Welding of Ductile Iron. Weld. J. 39 (1), 1–9.

Pouranvari, M. (2010). On the weldability of grey cast iron using nickel based filler metal. Mater. Design 31 (7), 3253–3258.

Zhang, X.Y., Zhou, Z.F., Xie, M.L., Zhang, Y.M. (1995). A Newly Developed Nickel-Iron Electrode with Superior Hot Cracking Resistance and High-Strength Properties for Welding Perlitic Nodular Iron. Welding Research Supplement 1, 16–20. https://app.aws.org/wj/supplement/WJ_1995_01_s16.pdf.

Zhang, X.Y., Zhou, Z.F., Zhang, Y.M., Wu, S.L., Guan, L.Y. (1996). Influence of Nickel-Iron Electrode Properties and Joint Shapes on Welded Joint Strength of Pearlitic Nodular Iron. Welding Research Supplement 9, 280–284. https://app.aws.org/wj/supplement/WJ_1996_09_s280.pdf.

[-]

This item appears in the following Collection(s)

Show full item record