Masip Sanchis, X.; Cazorla-Marín, A.; Montagud- Montalvá, C.; Marchante-Avellaneda, J.; Corberán, JM. (2018). Modeling, analysis and energy optimization of an air source heat pump system for SHW production. Instituto de Ingeniería Energética. Universitat Politècnica de València. 1-7. http://hdl.handle.net/10251/129634
Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/129634
Title:
|
Modeling, analysis and energy optimization of an air source heat pump system for SHW production
|
Author:
|
Masip Sanchis, Ximo
Cazorla-Marín, Antonio
Montagud- Montalvá, Carla
Marchante-Avellaneda, Javier
Corberán, José M.
|
UPV Unit:
|
Universitat Politècnica de València. Departamento de Termodinámica Aplicada - Departament de Termodinàmica Aplicada
|
Issued date:
|
|
Abstract:
|
In order to fulfill with the European normative EN-1717:2000 regarding the general requirements of devices to prevent pollution of potable water by backflow, in those systems using a heat pump (HP) for the production of ...[+]
In order to fulfill with the European normative EN-1717:2000 regarding the general requirements of devices to prevent pollution of potable water by backflow, in those systems using a heat pump (HP) for the production of sanitary hot water (SHW), the coupling of the HP with the storage tank must be indirect. This paper will analyze three of the possible coupling configurations for the case of an air source heat pump system: (i) external brazed plate heat exchanger, (ii) coil heat exchanger inside the storage tank and (iii) double wall condenser at the heat pump. The system will be modeled using a dynamic simulation tool (TRNSYS). The aim of this work is to compare the energy performance of each configuration and to optimize its operation.
[-]
|
Subjects:
|
Heat pump
,
Energy efficiency
,
Sanitary hot water production
,
Thermal storage
,
Energy optimization
|
Copyrigths:
|
Cerrado |
ISBN:
|
978-84-09-01619-8
|
Publisher:
|
Instituto de Ingeniería Energética. Universitat Politècnica de València
|
Conference name:
|
Congreso Ibérico y Congreso Iberoamericano de Ciencias y Técnicas del Frío (CYTEF) (Formerly: Congreso Español de Ciencias y Técnicas del Frío (CYTEF)
|
Conference place:
|
Valencia, Spain
|
Conference date:
|
Junio 19-21,2018
|
Project ID:
|
info:eu-repo/grantAgreement/GVA//ACIF%2F2016%2F131/
info:eu-repo/grantAgreement/EC/H2020/656889/EU/Geothermal Technology for €conomic Cooling and Heating/
info:eu-repo/grantAgreement/MECD//FPU15%2F03476/ES/FPU15%2F03476/
|
Thanks:
|
The present work has been supported by the European Community Horizon 2020 Program for European Research and Technological Development (2014-2020) inside the framework of the project 656889 – GEOTeCH (Geothermal Technology ...[+]
The present work has been supported by the European Community Horizon 2020 Program for European Research and Technological Development (2014-2020) inside the framework of the project 656889 – GEOTeCH (Geothermal Technology for Economic Cooling and Heating), by the Generalitat Valenciana inside the program “Ayudas para la contratación de personal investigador en formación de carácter predoctoral (ACIF/2016/131)” and by the Ministerio de Educación, Cultura y Deporte inside the programme ‘Formación de Profesorado Universitario (FPU15/03476)’
[-]
|
Type:
|
Capítulo de libro
Comunicación en congreso
|