Mostrar el registro sencillo del ítem
dc.contributor.author | Sutanto, Erwin | es_ES |
dc.contributor.author | AIN, Khusnul | es_ES |
dc.contributor.author | AZIZ, Muhammad | es_ES |
dc.contributor.author | Escrivá-Escrivá, Guillermo | es_ES |
dc.date.accessioned | 2020-04-17T12:51:07Z | |
dc.date.available | 2020-04-17T12:51:07Z | |
dc.date.issued | 2019-09-30 | es_ES |
dc.identifier.uri | http://hdl.handle.net/10251/140940 | |
dc.description.abstract | [EN] Residual-current devices (RCDs) are used to protect humans from electrical shocks. This study explores the DC limit parameters of RCDs using the capacitor. To find out the possible parameters, a common signal from the RCD in AC waveform is analyzed using a digital oscilloscope for reference. This signal is then transformed into a DC signal using a common circuit of a full-bridge rectifier, capacitor, and a voltage regulator. Finally, the signal is characterized using an oscilloscope and multimeter. The result of this work is I-V characteristic of the DC measurement obtained from the RCD. It shows two possible parameters. First is a voltage gap of 1 V which representing input current with a range from 0.4 to 64.3 mA. Second is an increasing speed of 1.06 V/s on average. These parameters could be used to overcome the nuisance trips of common RCDs. | es_ES |
dc.description.sponsorship | The work and publications are supported by the Faculty of Science and Technology, UniversitasAirlangga with a Young Lecturer's Research Fund Program. This article would not have been completed without the support of all the team members. Many thanks for all of the team members, as well as other colleagues for their suggestions and indirect assistance. | es_ES |
dc.language | Inglés | es_ES |
dc.publisher | Kavala Institute of Technology | es_ES |
dc.relation.ispartof | Journal of Engineering Science and Technology Review (Online) | es_ES |
dc.rights | Reconocimiento - No comercial (by-nc) | es_ES |
dc.subject | Residual Current Measurement | es_ES |
dc.subject | Electrical Safety Devices | es_ES |
dc.subject | RCD (Residual Current Device) | es_ES |
dc.subject | DC Measurement | es_ES |
dc.subject | Capacitor | es_ES |
dc.subject.classification | INGENIERIA ELECTRICA | es_ES |
dc.title | A Study on DC Limit Parameters in RCD Operation Using Capacitor | es_ES |
dc.type | Artículo | es_ES |
dc.identifier.doi | 10.25103/jestr.124.02 | es_ES |
dc.rights.accessRights | Abierto | es_ES |
dc.contributor.affiliation | Universitat Politècnica de València. Departamento de Ingeniería Eléctrica - Departament d'Enginyeria Elèctrica | es_ES |
dc.description.bibliographicCitation | Sutanto, E.; Ain, K.; Aziz, M.; Escrivá-Escrivá, G. (2019). A Study on DC Limit Parameters in RCD Operation Using Capacitor. Journal of Engineering Science and Technology Review (Online). 12(4):7-14. https://doi.org/10.25103/jestr.124.02 | es_ES |
dc.description.accrualMethod | S | es_ES |
dc.relation.publisherversion | https://doi.org/10.25103/jestr.124.02 | es_ES |
dc.description.upvformatpinicio | 7 | es_ES |
dc.description.upvformatpfin | 14 | es_ES |
dc.type.version | info:eu-repo/semantics/publishedVersion | es_ES |
dc.description.volume | 12 | es_ES |
dc.description.issue | 4 | es_ES |
dc.identifier.eissn | 1791-2377 | es_ES |
dc.relation.pasarela | S\406587 | es_ES |
dc.contributor.funder | Universitas Airlangga |