Smacchia, D.; Soto Pacheco, P.; Guglielmi, M.; Morro, JV.; Boria Esbert, VE.; Raboso, D. (2019). Implementation of Waveguide Terminations With Low-Passive Intermodulation for Conducted Test Beds in Backward Configuration. IEEE Microwave and Wireless Components Letters. 29(10):659-661. https://doi.org/10.1109/LMWC.2019.2933600
Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/157296
Título:
|
Implementation of Waveguide Terminations With Low-Passive Intermodulation for Conducted Test Beds in Backward Configuration
|
Autor:
|
Smacchia, Davide
Soto Pacheco, Pablo
Guglielmi, Marco
Morro, J. V.
Boria Esbert, Vicente Enrique
Raboso, David
|
Entidad UPV:
|
Universitat Politècnica de València. Instituto Universitario de Telecomunicación y Aplicaciones Multimedia - Institut Universitari de Telecomunicacions i Aplicacions Multimèdia
Universitat Politècnica de València. Departamento de Comunicaciones - Departament de Comunicacions
|
Fecha difusión:
|
|
Resumen:
|
[EN] This letter proposes a simple procedure to implement low-passive intermodulation (PIM) terminations in waveguide technology to measure conducted backward PIM. The procedure consists in inserting a filter before the ...[+]
[EN] This letter proposes a simple procedure to implement low-passive intermodulation (PIM) terminations in waveguide technology to measure conducted backward PIM. The procedure consists in inserting a filter before the waveguide termination of the test bench. This approach reduces the PIM contribution from the load and, consequently, lowers the residual PIM noise floor of the test bench. To validate the procedure, a conducted backward low-PIM setup working in K-band has been assembled and tested. The PIM performance improvement obtained fully confirms the validity of the proposed solution.
[-]
|
Palabras clave:
|
Intermodulation distorsion
,
Low-pass filters
,
Microwave filters
,
Passive circuits
,
PIM mitigation
|
Derechos de uso:
|
Reserva de todos los derechos
|
Fuente:
|
IEEE Microwave and Wireless Components Letters. (issn:
1531-1309
)
|
DOI:
|
10.1109/LMWC.2019.2933600
|
Editorial:
|
Institute of Electrical and Electronics Engineers
|
Versión del editor:
|
https://doi.org/10.1109/LMWC.2019.2933600
|
Código del Proyecto:
|
info:eu-repo/grantAgreement/MINECO//TEC2016-75934-C4-1-R/ES/DEMOSTRADORES TECNOLOGICOS DE FILTROS Y MULTIPLEXORES CON RESPUESTAS SELECTIVAS Y SINTONIZABLES EN NUEVAS GUIAS COMPACTAS PARA APLICACIONES ESPACIALES/
|
Descripción:
|
© 2019 IEEE. Personal use of this material is permitted. Permissíon from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertisíng or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
|
Agradecimientos:
|
This work was supported in part by the European Space Agency through several research and development contracts, in part by the Ministerio de Economia y Competitividad (Spanish Government) under Project TEC2016-75934-C4-1-R, ...[+]
This work was supported in part by the European Space Agency through several research and development contracts, in part by the Ministerio de Economia y Competitividad (Spanish Government) under Project TEC2016-75934-C4-1-R, and in part by the ESA-VSC High Power RF Space Laboratory.
[-]
|
Tipo:
|
Artículo
|