Rocher-Morant, J.; García-Navas, JL.; Romero Martínez, JO.; Lloret, J. (2019). A WSN-based monitoring system to control Sewerage. IEEE. 277-282. https://doi.org/10.1109/IOTSMS48152.2019.8939269
Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/181095
Title:
|
A WSN-based monitoring system to control Sewerage
|
Author:
|
Rocher-Morant, Javier
García-Navas, José Luis
Romero Martínez, José Oscar
Lloret, Jaime
|
UPV Unit:
|
Universitat Politècnica de València. Instituto de Investigación para la Gestión Integral de Zonas Costeras - Institut d'Investigació per a la Gestió Integral de Zones Costaneres
Universitat Politècnica de València. Departamento de Comunicaciones - Departament de Comunicacions
|
Issued date:
|
|
Abstract:
|
[EN] The sewerage is a critical infrastructure in cities because of the drainage of the urban runoff and the evacuation of the wastewater. Two types of sewerage, separated sewerage and combined sewerage, can be differentiated. ...[+]
[EN] The sewerage is a critical infrastructure in cities because of the drainage of the urban runoff and the evacuation of the wastewater. Two types of sewerage, separated sewerage and combined sewerage, can be differentiated. In this paper, we show the application of a level sensor and a rain sensor for monitoring the separated sewerage. The level sensor is used for knowing if there is a critical level of water in the sewerage. The rain sensor is used to know if it is raining. The combination of this information allows the identification of three scenarios. These scenarios are normal situation, low drainage and illicit discharge/blockages in the pipeline. In addition, we study the use of sensors and mathematical models for monitoring the velocity of the wastewater. We concluded that the use of mathematical models is a good option for monitoring the velocity. Because with exception of the thermal sensors the other types of sensors show important gaps. The velocity is used to estimate the flow that is dumping in the water bodies. We use an ESP32 board program with Arduino IDE for data collection and sending the data to a server on the same network via Wi-Fi. The server is a computer that processes the data. We present the programming code and the ports that should be used for transmitting the data from Arduino to computer server.
[-]
|
Subjects:
|
WSN
,
Wastewater
,
Level sensors
,
Rain sensors
|
Copyrigths:
|
Reserva de todos los derechos
|
ISBN:
|
978-1-7281-2949-5
|
Source:
|
2019 Sixth International Conference on Internet of Things: Systems, Management and Security (IOTSMS).
|
DOI:
|
10.1109/IOTSMS48152.2019.8939269
|
Publisher:
|
IEEE
|
Publisher version:
|
https://doi.org/10.1109/IOTSMS48152.2019.8939269
|
Conference name:
|
6th IEEE International Conference on Internet of Things: Systems, Management and Security (IOTSMS 2019)
|
Conference place:
|
Granada, España
|
Conference date:
|
Octubre 22-25,2019
|
Project ID:
|
info:eu-repo/grantAgreement/MECD//FPU16%2F05540/ES/FPU16%2F05540/
info:eu-repo/grantAgreement/EC//ERANETMED3-227 SMARTWATIR/
|
Thanks:
|
Supported by European Union through the project ERANETMED3-227 SMARTWATIR by the Ministerio de Educación, Cultura y Deporte. Grant number FPU16/05540
|
Type:
|
Comunicación en congreso
Capítulo de libro
|