Single step heat treatment for the development of beta titanium composites with in-situ TiB and TiC reinforcement

Abstract

[EN] Titanium matrix composites have been attracting great interest from aerospace industry due to favorable properties like thermal stability, high specific strength, corrosion, and wear resistance. Optimal relation between mechanical properties demands complex processing routes and, in this context, the effects of a single-step processing route on microstructure and mechanical properties of ß titanium matrix composites was placed on focus in this study. The commercial TIMETAL Beta 21S alloy and its modification with the addition of B4C were developed, allowing in-situ formation of TiB and TiC particles in a ß matrix. The composites presented highest values of mechanical strength and hardness, and the addition of 3% of B4C provided a significant reduction in grain size, and compressive yield strength and ultimate compressive strength values of 1205 MPa and 1636 MPa, respectively, with a maximum deformation of 20.5%. An orientation relationship investigation provided in- formation about some unconventional relation between the present phases.