A Comparative Analysis of Conductance Probes and High-Speed Camera Measurements for Interfacial Behavior in Annular Air-Water Flow

Abstract

[EN] Different techniques are used to analyze annular flow, but the more interesting ones are those techniques that do not perturb the flow and provide enough resolution to clearly distinguish the interfacial phenomena that take place at the interface, especially the disturbance waves (DW) and the ripple waves (DW). The understanding of these events is important because it influences the heat and mass transfer taking place through the thin film formed near the walls in this flow regime. The laser-induced fluorescence (LIF) and the three-electrode conductance probe are two commonly used techniques to study experimentally annular flow phenomena. In this paper, a set of experiments at different temperatures of 20 degrees C, 30 degrees C and 40 degrees C and different liquid Reynolds numbers have been performed in the annular flow regime, the characteristic of the DW and RW as average height and frequency of these waves has been measured by both techniques LIF and conductance probes. In addition, we also measured the mean film thickness. It was found that the mean film thickness and the DW height are practically the same when measured by both techniques; however, the height of the RW is smaller when measured by the conductance probe and this difference diminishes when the temperature increases.