Attenuation of pipeline filling over-pressures through trapped air

Abstract

[EN] Entrapped air pockets in water pipelines play a significant role in influencing transient over-pressures during filling procedures. Several research is focused on highlighting the attenuation of pressure peaks in pipes with single air pockets. This research studies the air-water interaction during rapid water filling processes in an irregular pipeline and air pockets in different branches, and how the trapped air can attenuate the over-pressure peaks. A three-dimensional computational fluid dynamics (CFD) model was developed, and numerical results of the model were validated through experimental measurements. For a given initial air pocket condition upstream of the high point, the maximum air pocket over-pressure was 11% to 32% lower when the descending pipe segment initially contains air compared to when it contains water. In sum, it was found that entrapped air pockets at high points of water pipelines can help mitigate transient over-pressures considering specific initial hydraulic conditions prior to filling operations.