Development of electrochemical synthesis and testing holders for an autonomous electrocatalyst discovery platform for Alkaline Electrolysis

Abstract

[ES] Este proyecto asimismo asista en ongoing doctorate proyecto sobre developing en autonomous electrocatalyst discovery platform for alkaline electrolysis by designing and 3D printing 2 holders que se utilizan para synthesise y test electrocatalysts. Holders’ design must meet certain physical and dimensional requerimientos as well as ensuring the reproducibility of the experiments conducted within them are reproducible and accurate. Holders successfully met the physical and dimensional requirements and experiments could reliably be performed in them. Some of the experiments resultas showed an aceptable consistente whereas others were too dispersed. Modificaciones were proposed to enhance holders’ performance and to conduct experiments that will help better assess the causas of results variance

[EN] This project aims to assist an ongoing doctorate project about developing an autonomous electrocatalyst discovery platform for alkaline electrolysis by designing and 3D printing two holders that will be used to synthesise and test electrocatalysts. Holders’ design must meet certain physical and dimensional requirements as well as ensuring the reproducibility of the experiments conducted within them are reproducible and accurate. Holders successfully met the physical and dimensional requirements and experiments could reliably be performed in them. Some of the experiment’s results showed an acceptable consistency whereas others were too dispersed. Modifications were proposed to enhance holders’ performance and to conduct experiments that will help better assess the causes of results variance