New consistency index based on inertial operating speed

Abstract

The occurrence of road crashes depends on several factors, with design consistency (i.e., conformance of highway geometry to drivers' expectations) being one of the most important. A new consistency model for evaluating the performance of tangent-to-curve transitions on two-lane rural roads was developed. This model was based on the inertial consistency index (ICI) defined for each transition. The ICI was calculated at the beginning point of the curve as the difference between the average operating speed on the previous 1-km road segment (inertial operating speed) and the actual operating speed at this point. For the calibration of the ICI and its thresholds, 88 road segments, which included 1,686 tangent-to-curve transitions, were studied. The relationship between those results and the crash rate associated with each transition was analyzed. The results showed that the higher the ICI was, the higher the crash rate; thus, the probability of accidents increased. Similar results were obtained from the study of the relationship between the ICI and the weighted average crash rate of the corresponding group of transitions. A graphical and statistical analysis established that road consistency might be considered good when the ICI was lower than 10 km/h, poor when the ICI was higher than 20 km/h, and fair otherwise. A validation process that considered 20 road segments was performed. The ICI values obtained were highly correlated to the number of crashes that had occurred at the analyzed transitions. Thus, the ICI and its consistency thresholds resulted in a new approach for evaluation of consistency.