Use of TRACE best estimate code to analyze spent fuel storage pools safety

Abstract

Nuclear policies have experienced an important change since Fukushima Daiichi nuclear plant accident and the safety of spent fuels has been in the spot issue among all the safety concerns. At many countries, the spent fuel of nuclear power plants is not reprocessed so it has to be stored inside the facilities, normally in pools. As nuclear power plants use best estimate codes to perform safety analysis, it is interesting to assess the capacity of such codes to simulate spent fuel pools behavior. This paper uses TRACE thermal-hydraulic code to simulate steady state and transient conditions of spent fuel pools. The steady state results are compared with plant measurements of Maine Yankee with a good agreement between the calculations and the measurements. The transient simulated is a loss of cooling together with a loss of coolant through the transfer channel. TRACE heat transfer radiation model has been activated using the parameters obtained from COBRA thermal-hydraulic code.