- -

Study of the Influence of adding styrene-ethylene/butadiene-styrene in acrylonitrile-butadiene-styrene and polyethylene blends

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

  • Estadisticas de Uso

Study of the Influence of adding styrene-ethylene/butadiene-styrene in acrylonitrile-butadiene-styrene and polyethylene blends

Mostrar el registro completo del ítem

Peydro, MA.; Parres, F.; Navarro Vidal, R.; Sanchez-Caballero, S. (2014). Study of the Influence of adding styrene-ethylene/butadiene-styrene in acrylonitrile-butadiene-styrene and polyethylene blends. Polymer Engineering and Science. 54(6):1313-1324. https://doi.org/10.1002/pen.23680

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/57449

Ficheros en el ítem

Thumbnail
Nombre: Study ot the Influence ...
Tamaño: 1.210Mb
Formato: PDF
Descripción: Versión del Autor.
Abrir/Preview
[Cerrado]
Nombre: Study of the Influence ...
Tamaño: 346.1Kb
Formato: PDF
Descripción: Versión editorial
Solicitar una copia al autor

Metadatos del ítem

Título: Study of the Influence of adding styrene-ethylene/butadiene-styrene in acrylonitrile-butadiene-styrene and polyethylene blends
Autor: Peydro, M. A. Parres, F. Navarro Vidal, Raúl Sanchez-Caballero, Samuel
Entidad UPV: Universitat Politècnica de València. Departamento de Ingeniería Mecánica y de Materiales - Departament d'Enginyeria Mecànica i de Materials
Fecha difusión:
Resumen:
This work studies the recovery of two grades of acrylonitrile butadiene styrene (ABS) contaminated with low-density polyethylene (LDPE), by adding styrene ethylene/butadiene styrene (SEBS). To simulate contaminated ABS, ...[+]
Palabras clave: Mechanical-properties , Rheological characterization , Optical-characterization , Thermal degradation , Shrinkage analysis , Blend , Recycling , Waste , Additives , Block copolymer , ABS , SEBS , LPDE , Inyection-molding
Derechos de uso: Reserva de todos los derechos
Fuente:
Polymer Engineering and Science. (issn: 0032-3888 ) (eissn: 1548-2634 )
DOI: 10.1002/pen.23680
Editorial:
Wiley-Blackwell
Versión del editor: http://dx.doi.org/10.1002/pen.23680
Código del Proyecto:
info:eu-repo/grantAgreement/UPV//PAID 06-09-20091056/
Agradecimientos:
Contract grant sponsor: "Subdireccion de Investigacion, Desarrollo e Innovacion de la Universitat Politecnica de Valencia" to the research project: "la investigacion de sistemas ternarios aplicados a los materiales polimericos ...[+]
Tipo: Artículo

References

Adrados, A., de Marco, I., Caballero, B. M., López, A., Laresgoiti, M. F., & Torres, A. (2012). Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste. Waste Management, 32(5), 826-832. doi:10.1016/j.wasman.2011.06.016

Brebu, M., Bhaskar, T., Murai, K., Muto, A., Sakata, Y., & Uddin, M. A. (2004). Thermal degradation of PE and PS mixed with ABS-Br and debromination of pyrolysis oil by Fe- and Ca-based catalysts. Polymer Degradation and Stability, 84(3), 459-467. doi:10.1016/j.polymdegradstab.2004.02.003

Maris, E., Aoussat, A., Naffrechoux, E., & Froelich, D. (2012). Polymer tracer detection systems with UV fluorescence spectrometry to improve product recyclability. Minerals Engineering, 29, 77-88. doi:10.1016/j.mineng.2011.09.016 [+]
Adrados, A., de Marco, I., Caballero, B. M., López, A., Laresgoiti, M. F., & Torres, A. (2012). Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste. Waste Management, 32(5), 826-832. doi:10.1016/j.wasman.2011.06.016

Brebu, M., Bhaskar, T., Murai, K., Muto, A., Sakata, Y., & Uddin, M. A. (2004). Thermal degradation of PE and PS mixed with ABS-Br and debromination of pyrolysis oil by Fe- and Ca-based catalysts. Polymer Degradation and Stability, 84(3), 459-467. doi:10.1016/j.polymdegradstab.2004.02.003

Maris, E., Aoussat, A., Naffrechoux, E., & Froelich, D. (2012). Polymer tracer detection systems with UV fluorescence spectrometry to improve product recyclability. Minerals Engineering, 29, 77-88. doi:10.1016/j.mineng.2011.09.016

Ta?demir, M. (2004). Properties of acrylonitrile-butadiene-styrene/polycarbonate blends with styrene-butadiene-styrene block copolymer. Journal of Applied Polymer Science, 93(6), 2521-2527. doi:10.1002/app.20708

Taşdem??r, M., & Karatop, Ş. (2006). Effect of styrene–isopren–styrene addition on the recycled polycarbonate/acrylonitrile–butadiene–styrene polymer blends. Journal of Applied Polymer Science, 101(1), 559-566. doi:10.1002/app.23555

Li, B., Wan, C., Zhang, Y., & Ji, J. (2010). Blends of poly(2,6-dimethyl-1,4-phenylene oxide)/polyamide 6 toughened by maleated polystyrene-based copolymers: Mechanical properties, morphology, and rheology. Journal of Applied Polymer Science, 115(6), 3385-3392. doi:10.1002/app.30742

Yin, N., Zhang, Y., Zhang, Y., Zhang, X., & Zhou, W. (2007). Preparation and properties of PC/SAN alloy modified with styrene-ethylene-butylene-styrene block copolymer. Journal of Applied Polymer Science, 106(1), 637-643. doi:10.1002/app.26681

Peydró, M. A., Parres, F., Crespo, J. E., & Juárez, D. (2010). Study of rheological behavior during the recovery process of high impact polystyrene using cross-WLF model. Journal of Applied Polymer Science, 120(4), 2400-2410. doi:10.1002/app.33444

Tiganis, B. ., Burn, L. ., Davis, P., & Hill, A. . (2002). Thermal degradation of acrylonitrile–butadiene–styrene (ABS) blends. Polymer Degradation and Stability, 76(3), 425-434. doi:10.1016/s0141-3910(02)00045-9

Arostegui, A., Sarrionandia, M., Aurrekoetxea, J., & Urrutibeascoa, I. (2006). Effect of dissolution-based recycling on the degradation and the mechanical properties of acrylonitrile–butadiene–styrene copolymer. Polymer Degradation and Stability, 91(11), 2768-2774. doi:10.1016/j.polymdegradstab.2006.03.019

Karahaliou, E.-K., & Tarantili, P. A. (2009). Stability of ABS compounds subjected to repeated cycles of extrusion processing. Polymer Engineering & Science, 49(11), 2269-2275. doi:10.1002/pen.21480

Karahaliou, E.-K., & Tarantili, P. A. (2009). Preparation of poly(acrylonitrile-butadiene-styrene)/montmorillonite nanocomposites and degradation studies during extrusion reprocessing. Journal of Applied Polymer Science, 113(4), 2271-2281. doi:10.1002/app.30158

Chang, T. C., & Faison, E. (2001). Shrinkage behavior and optimization of injection molded parts studied by the taguchi method. Polymer Engineering & Science, 41(5), 703-710. doi:10.1002/pen.10766

Shen, C., Wang, L., & Li, Q. (2007). Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method. Journal of Materials Processing Technology, 183(2-3), 412-418. doi:10.1016/j.jmatprotec.2006.10.036

Tang, S. H., Tan, Y. J., Sapuan, S. M., Sulaiman, S., Ismail, N., & Samin, R. (2007). The use of Taguchi method in the design of plastic injection mould for reducing warpage. Journal of Materials Processing Technology, 182(1-3), 418-426. doi:10.1016/j.jmatprotec.2006.08.025

Ganguly, A., Saha, S., Bhowmick, A. K., & Chattopadhyay, S. (2008). Augmenting the performance of acrylonitrile–butadiene–styrene plastics for low-noise dynamic applications. Journal of Applied Polymer Science, 109(3), 1467-1475. doi:10.1002/app.28057

[-]

recommendations

 

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem