- -

Combinacioón de la impresión 3D personal y técnica de post-proceso: curvando piezas con calor

RiuNet: Institutional repository of the Polithecnic University of Valencia

Share/Send to

Cited by

Statistics

Combinacioón de la impresión 3D personal y técnica de post-proceso: curvando piezas con calor

Show simple item record

Files in this item

dc.contributor.advisor Alcaide Marzal, Jorge es_ES
dc.contributor.author Peterson, Alexander Conrad es_ES
dc.date.accessioned 2016-01-08T12:48:10Z
dc.date.available 2016-01-08T12:48:10Z
dc.date.created 2014
dc.date.issued 2016-01-08
dc.identifier.uri http://hdl.handle.net/10251/59554
dc.description.abstract Personal 3D printers have come a long way since the Rep-Rap project started in 2004, and their features have continuously improved. It is even possible for users to improve their own machines as they are based on an open-source infrastructure. Amateurs and professionals have also created large communities in which they can share their ideas and experiments, including post-processing, on a daily basis. This article will focus on a type of post-processing that has not been explored in detail: using heat to produce curved pieces, thus obtaining a product with a better finish. Experiments will be conducted to determine how reliably curves of different complexities can be obtained, and also to ascertain whether the shrinkage of a piece subjected to heat can be predicted, so that any variation can be corrected at the design stage. es_ES
dc.format.extent 9 es_ES
dc.language Español es_ES
dc.rights Reserva de todos los derechos es_ES
dc.subject Impresión es_ES
dc.subject Post-proceso es_ES
dc.subject Curvar es_ES
dc.subject Impresión 3D es_ES
dc.subject.classification PROYECTOS DE INGENIERIA es_ES
dc.subject.other Máster Universitario en Ingeniería del Diseño-Màster Universitari en Enginyeria del Disseny es_ES
dc.title Combinacioón de la impresión 3D personal y técnica de post-proceso: curvando piezas con calor es_ES
dc.type Tesis de máster es_ES
dc.rights.accessRights Cerrado es_ES
dc.contributor.affiliation Universitat Politècnica de València. Escuela Técnica Superior de Ingeniería del Diseño - Escola Tècnica Superior d'Enginyeria del Disseny es_ES
dc.description.bibliographicCitation Peterson, AC. (2014). Combinacioón de la impresión 3D personal y técnica de post-proceso: curvando piezas con calor. http://hdl.handle.net/10251/59554 es_ES
dc.description.accrualMethod Archivo delegado es_ES


This item appears in the following Collection(s)

Show simple item record