- -

Simplified trellis min-max decoder architecture for nonbinary low-density parity-check codes

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

Simplified trellis min-max decoder architecture for nonbinary low-density parity-check codes

Mostrar el registro completo del ítem

Lacruz Jucht, JO.; García Herrero, FM.; Declercq, D.; Valls Coquillat, J. (2015). Simplified trellis min-max decoder architecture for nonbinary low-density parity-check codes. IEEE Transactions on Very Large Scale Integration (VLSI) Systems. 23(9):1783-1792. doi:10.1109/TVLSI.2014.2344113

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/65131

Ficheros en el ítem

Metadatos del ítem

Título: Simplified trellis min-max decoder architecture for nonbinary low-density parity-check codes
Autor:
Entidad UPV: Universitat Politècnica de València. Departamento de Ingeniería Electrónica - Departament d'Enginyeria Electrònica
Universitat Politècnica de València. Instituto Universitario de Telecomunicación y Aplicaciones Multimedia - Institut Universitari de Telecomunicacions i Aplicacions Multimèdia
Fecha difusión:
Resumen:
Nonbinary low-density parity-check (NB-LDPC) codes have become an efficient alternative to their binary counterparts in different scenarios, such as moderate codeword lengths, high-order modulations, and burst error ...[+]
Palabras clave: Layered decoder , Message passing algorithm , Nonbinary low-density parity-check (NB-LDPC) , Trellis min–max (TMM)
Derechos de uso: Reserva de todos los derechos
Fuente:
IEEE Transactions on Very Large Scale Integration (VLSI) Systems. (issn: 1063-8210 )
DOI: 10.1109/TVLSI.2014.2344113
Editorial:
Institute of Electrical and Electronics Engineers (IEEE)
Versión del editor: http://dx.doi.org/10.1109/TVLSI.2014.2344113
Descripción: © 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
Agradecimientos:
This work was supported in part by the Spanish Ministerio de Ciencia e Innovacion under Grant TEC2011-27916; in part by the Universitat Politecnica de Valencia, Gandia, Spain, under Grant PAID-06-2012-SP20120625; and in ...[+]
Tipo: Artículo

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem