- -

Determination of the potential gold electrowinning from an amoniacal thiosulphate solution applied to recycling of printed circuit board scraps

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

  • Estadisticas de Uso

Determination of the potential gold electrowinning from an amoniacal thiosulphate solution applied to recycling of printed circuit board scraps

Mostrar el registro completo del ítem

Kasper, AC.; Carrillo Abad, J.; García Gabaldón, M.; Veit, HM.; Pérez-Herranz, V. (2015). Determination of the potential gold electrowinning from an amoniacal thiosulphate solution applied to recycling of printed circuit board scraps. Waste Management and Research. 34(1):47-57. doi:10.1177/0734242X15607425

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/65503

Ficheros en el ítem

Metadatos del ítem

Título: Determination of the potential gold electrowinning from an amoniacal thiosulphate solution applied to recycling of printed circuit board scraps
Autor: Kasper, Angela Cristina Carrillo Abad, Jorge García Gabaldón, Montserrat Veit, Hugo Marcelo Pérez-Herranz, Valentín
Entidad UPV: Universitat Politècnica de València. Departamento de Ingeniería Química y Nuclear - Departament d'Enginyeria Química i Nuclear
Fecha difusión:
Resumen:
The use of electrochemical techniques in the selective recovery of gold from a solution containing thiosulphate, ammonia, and copper, obtained from the leaching of printed circuit boards from mobile phones using ammoniacal ...[+]
Palabras clave: Printed circuit boards , gold , thiosulphate , cyclic voltammetry , electrolysis studies , gold electrowinning
Derechos de uso: Reserva de todos los derechos
Fuente:
Waste Management and Research. (issn: 0734-242X ) (eissn: 1096-3669 )
DOI: 10.1177/0734242X15607425
Editorial:
SAGE Publications
Versión del editor: http://dx.doi.org/10.1177/0734242X15607425
Agradecimientos:
The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors received financial support for the research from CAPES and CNPq from Brazil.[+]
Tipo: Artículo

References

Abbruzzese, C., Fornari, P., Massidda, R., Vegliò, F., & Ubaldini, S. (1995). Thiosulphate leaching for gold hydrometallurgy. Hydrometallurgy, 39(1-3), 265-276. doi:10.1016/0304-386x(95)00035-f

Alonso, A. R., Lapidus, G. T., & González, I. (2007). A strategy to determine the potential interval for selective silver electrodeposition from ammoniacal thiosulfate solutions. Hydrometallurgy, 85(2-4), 144-153. doi:10.1016/j.hydromet.2006.08.009

Arslan, F., & Sayiner, B. (2007). EXTRACTION OF GOLD AND SILVER FROM TURKISH GOLD ORE BY AMMONIACAL THIOSULPHATE LEACHING. Mineral Processing and Extractive Metallurgy Review, 29(1), 68-82. doi:10.1080/08827500601141784 [+]
Abbruzzese, C., Fornari, P., Massidda, R., Vegliò, F., & Ubaldini, S. (1995). Thiosulphate leaching for gold hydrometallurgy. Hydrometallurgy, 39(1-3), 265-276. doi:10.1016/0304-386x(95)00035-f

Alonso, A. R., Lapidus, G. T., & González, I. (2007). A strategy to determine the potential interval for selective silver electrodeposition from ammoniacal thiosulfate solutions. Hydrometallurgy, 85(2-4), 144-153. doi:10.1016/j.hydromet.2006.08.009

Arslan, F., & Sayiner, B. (2007). EXTRACTION OF GOLD AND SILVER FROM TURKISH GOLD ORE BY AMMONIACAL THIOSULPHATE LEACHING. Mineral Processing and Extractive Metallurgy Review, 29(1), 68-82. doi:10.1080/08827500601141784

Aylmore, M. G. (2005). Alternative lixiviants to cyanide for leaching gold ores. Advances in Gold Ore Processing, 501-539. doi:10.1016/s0167-4528(05)15021-2

Aylmore, M. ., & Muir, D. . (2001). Thiosulfate leaching of gold—A review. Minerals Engineering, 14(2), 135-174. doi:10.1016/s0892-6875(00)00172-2

Balakrishnan Ramesh Babu, Anand Kuber Parande, & Chiya Ahmed Basha. (2007). Electrical and electronic waste: a global environmental problem. Waste Management & Research, 25(4), 307-318. doi:10.1177/0734242x07076941

Breuer, P. L., & Jeffrey, M. I. (2000). Thiosulfate leaching kinetics of gold in the presence of copper and ammonia. Minerals Engineering, 13(10-11), 1071-1081. doi:10.1016/s0892-6875(00)00091-1

Carrillo-Abad, J., García-Gabaldón, M., Ortega, E., & Pérez-Herranz, V. (2012). Recovery of zinc from spent pickling solutions using an electrochemical reactor in presence and absence of an anion-exchange membrane: Galvanostatic operation. Separation and Purification Technology, 98, 366-374. doi:10.1016/j.seppur.2012.08.006

Chancerel, P., Bolland, T., & Rotter, V. S. (2010). Status of pre-processing of waste electrical and electronic equipment in Germany and its influence on the recovery of gold. Waste Management & Research, 29(3), 309-317. doi:10.1177/0734242x10368303

Chancerel, P., Meskers, C. E. M., Hagelüken, C., & Rotter, V. S. (2009). Assessment of Precious Metal Flows During Preprocessing of Waste Electrical and Electronic Equipment. Journal of Industrial Ecology, 13(5), 791-810. doi:10.1111/j.1530-9290.2009.00171.x

Feng, D., & van Deventer, J. S. J. (2006). Ammoniacal thiosulphate leaching of gold in the presence of pyrite. Hydrometallurgy, 82(3-4), 126-132. doi:10.1016/j.hydromet.2006.03.006

Feng, D., & van Deventer, J. S. J. (2007). Interactions between sulphides and manganese dioxide in thiosulphate leaching of gold ores. Minerals Engineering, 20(6), 533-540. doi:10.1016/j.mineng.2006.10.012

Fourcade, F., Tzedakis, T., & Bergel, A. (2003). Electrochemical process for metal recovery from iodized silver derivatives in liquid/solid mixture: Experimental and theoretical approaches. Chemical Engineering Science, 58(15), 3507-3522. doi:10.1016/s0009-2509(03)00198-2

Friege, H. (2012). Review of material recovery from used electric and electronic equipment-alternative options for resource conservation. Waste Management & Research, 30(9_suppl), 3-16. doi:10.1177/0734242x12448521

García-Gabaldón, M., Pérez-Herranz, V., García-Antón, J., & Guiñón, J. L. (2005). Electrochemical recovery of tin and palladium from the activating solutions of the electroless plating of polymers. Separation and Purification Technology, 45(3), 183-191. doi:10.1016/j.seppur.2005.03.008

GARCIAGABALDON, M., PEREZHERRANZ, V., GARCIAANTON, J., & GUINON, J. (2006). Electrochemical recovery of tin from the activating solutions of the electroless plating of polymersGalvanostatic operation. Separation and Purification Technology, 51(2), 143-149. doi:10.1016/j.seppur.2005.12.028

Giannopoulou, I., Panias, D., & Paspaliaris, I. (2009). Electrochemical modeling and study of copper deposition from concentrated ammoniacal sulfate solutions. Hydrometallurgy, 99(1-2), 58-66. doi:10.1016/j.hydromet.2009.06.009

Gromov, O. G., Kuz’min, A. P., Kunshina, G. B., Lokshin, E. P., & Kalinnikov, V. T. (2004). Electrochemical Recovery of Silver from Secondary Raw Materials. Russian Journal of Applied Chemistry, 77(1), 62-66. doi:10.1023/b:rjac.0000024577.90857.07

Grosse, A. C., Dicinoski, G. W., Shaw, M. J., & Haddad, P. R. (2003). Leaching and recovery of gold using ammoniacal thiosulfate leach liquors (a review). Hydrometallurgy, 69(1-3), 1-21. doi:10.1016/s0304-386x(02)00169-x

Ha, V. H., Lee, J., Jeong, J., Hai, H. T., & Jha, M. K. (2010). Thiosulfate leaching of gold from waste mobile phones. Journal of Hazardous Materials, 178(1-3), 1115-1119. doi:10.1016/j.jhazmat.2010.01.099

Hagelüken, C., & Corti, C. W. (2010). Recycling of gold from electronics: Cost-effective use through ‘Design for Recycling’. Gold Bulletin, 43(3), 209-220. doi:10.1007/bf03214988

Harrison, J. A., & Thompson, J. (1973). The electrodeposition of precious metals; a review of the fundamental electrochemistry. Electrochimica Acta, 18(11), 829-834. doi:10.1016/0013-4686(73)85034-0

Jeffrey, M. . (2001). Kinetic aspects of gold and silver leaching in ammonia–thiosulfate solutions. Hydrometallurgy, 60(1), 7-16. doi:10.1016/s0304-386x(00)00151-1

Kasper, A. C., Bernardes, A. M., & Veit, H. M. (2011). Characterization and recovery of polymers from mobile phone scrap. Waste Management & Research, 29(7), 714-726. doi:10.1177/0734242x10391528

Kasper, A. C., Berselli, G. B. T., Freitas, B. D., Tenório, J. A. S., Bernardes, A. M., & Veit, H. M. (2011). Printed wiring boards for mobile phones: Characterization and recycling of copper. Waste Management, 31(12), 2536-2545. doi:10.1016/j.wasman.2011.08.013

Koyama, K., Tanaka, M., Miyasaka, Y., & Lee, J. (2006). Electrolytic Copper Deposition from Ammoniacal Alkaline Solution Containing Cu(I). MATERIALS TRANSACTIONS, 47(8), 2076-2080. doi:10.2320/matertrans.47.2076

Lack, B., Duncan, J., & Nyokong, T. (1999). Adsorptive cathodic stripping voltammetric determination of gold(III) in the presence of yeast mannan. Analytica Chimica Acta, 385(1-3), 393-399. doi:10.1016/s0003-2670(98)00736-3

Mironov, I. V., & Makotchenko, E. V. (2009). The Hydrolysis of AuCl 4 − and the Stability of Aquachlorohydroxocomplexes of Gold(III) in Aqueous Solution. Journal of Solution Chemistry, 38(6), 725-737. doi:10.1007/s10953-009-9400-9

Navarro, P., Vargas, C., Villarroel, A., & Alguacil, F. . (2002). On the use of ammoniacal/ammonium thiosulphate for gold extraction from a concentrate. Hydrometallurgy, 65(1), 37-42. doi:10.1016/s0304-386x(02)00062-2

Peng, C., Liu, Y., Bi, J., Xu, H., & Ahmed, A.-S. (2011). Recovery of copper and water from copper-electroplating wastewater by the combination process of electrolysis and electrodialysis. Journal of Hazardous Materials, 189(3), 814-820. doi:10.1016/j.jhazmat.2011.03.034

Reyes Cruz, V., Oropeza, M. T., González, I., & Ponce‐De‐León, C. (2002). Journal of Applied Electrochemistry, 32(5), 473-479. doi:10.1023/a:1016529314840

Senanayake, G. (2004). Analysis of reaction kinetics, speciation and mechanism of gold leaching and thiosulfate oxidation by ammoniacal copper(II) solutions. Hydrometallurgy, 75(1-4), 55-75. doi:10.1016/j.hydromet.2004.06.004

Senanayake, G. (2007). Review of rate constants for thiosulphate leaching of gold from ores, concentrates and flat surfaces: Effect of host minerals and pH. Minerals Engineering, 20(1), 1-15. doi:10.1016/j.mineng.2006.04.011

Trejo, G., Gil, A. F., & Gonz�lez, I. (1996). Electrodeposition of gold in ammoniacal medium: influence of substrate and temperature. Journal of Applied Electrochemistry, 26(12). doi:10.1007/bf00249932

Trindade RBE, Barbosa Filho O (2002) Extração de Ouro - Princípios, Tecnologia e Meio Ambiente. Rio de Janeiro, CETEM, Centro de Tecnologia Mineral, Ministério da Ciência e Tecnologia.

Tripathi, A., Kumar, M., C. Sau, D., Agrawal, A., Chakravarty, S., & R. Mankhand, T. (2012). Leaching of Gold from the Waste Mobile Phone Printed Circuit Boards (PCBs) with Ammonium Thiosulphate. International Journal of Metallurgical Engineering, 1(2), 17-21. doi:10.5923/j.ijmee.20120102.02

UNEP (United Nations Environmental Programme) and UNU (United Nations University) (2009) Recycling – From e-waste to resources, Final report. Berlin.

UNEP (International Panel for Sustainable Resource Management, United Nations Environmental Programme) (2013) Metal recycling – opportunities, limits, infrastructure. Paris.

Vazquez-Arenas, J., Lazaro, I., & Cruz, R. (2007). Electrochemical study of binary and ternary copper complexes in ammonia-chloride medium. Electrochimica Acta, 52(20), 6106-6117. doi:10.1016/j.electacta.2007.03.062

Veit, H. M., Bernardes, A. M., Ferreira, J. Z., Tenório, J. A. S., & Malfatti, C. de F. (2006). Recovery of copper from printed circuit boards scraps by mechanical processing and electrometallurgy. Journal of Hazardous Materials, 137(3), 1704-1709. doi:10.1016/j.jhazmat.2006.05.010

Yap, C. Y., & Mohamed, N. (2007). An electrogenerative process for the recovery of gold from cyanide solutions. Chemosphere, 67(8), 1502-1510. doi:10.1016/j.chemosphere.2006.12.017

Zhang, S., & Nicol, M. J. (2003). Journal of Applied Electrochemistry, 33(9), 767-775. doi:10.1023/a:1025502303122

Zhang, S., & Nicol, M. J. (2005). An electrochemical study of the dissolution of gold in thiosulfate solutions. Part II. Effect of Copper. Journal of Applied Electrochemistry, 35(3), 339-345. doi:10.1007/s10800-004-7469-9

Zhang, Y., Liu, S., Xie, H., Zeng, X., & Li, J. (2012). Current Status on Leaching Precious Metals from Waste Printed Circuit Boards. Procedia Environmental Sciences, 16, 560-568. doi:10.1016/j.proenv.2012.10.077

[-]

recommendations

 

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem