Improvement of CNFs/SiC nanocomposites properties obtained from different routes and consolidated by pulsed electric-current pressure sintering

Abstract

The influence of the preparation route and composition on carbon nanofibers-silicon carbide (CNFs/SiC) nanocomposites' properties was studied. Nanopowders were mixed by ultrasonic dispersion or high attrition milling and the consolidation was done by pulsed electric-current pressure sintering technique. The relative density and fracture strength of high-energy attrition milled CNFs/SiC nanocomposites gradually increased with the increase of sintering temperature, from 1400 to 1800 degrees C and holding time 1 to 30 min. A chemical surface coating of CNFs with alumina precursor is proposed as a very effective way for improving the interaction between CNFs and SiC. An increase of 54% in fracture strength was achieved on the nanocomposites when the surface coating was used. As a consequence of the stronger interaction between the components, which is achieved through the use of suitable processing route and sintering parameters, and the role of nano-alumina as sintering aid improved mechanical properties was achieved. (c) 2012 Elsevier B.V. All rights reserved.