- -

Influence of the load application rate and the statistical model for brittle failure on the bending strength of extruded ceramic tiles

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

Influence of the load application rate and the statistical model for brittle failure on the bending strength of extruded ceramic tiles

Mostrar el registro completo del ítem

Defez Garcia, B.; Peris Fajarnes, G.; Santiago-Praderas, V.; Soria, J.; Lluna Gil, E. (2013). Influence of the load application rate and the statistical model for brittle failure on the bending strength of extruded ceramic tiles. Ceramics International. 39(3):3329-3335. doi:10.1016/j.ceramint.2012.10.022

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/74866

Ficheros en el ítem

Metadatos del ítem

Título: Influence of the load application rate and the statistical model for brittle failure on the bending strength of extruded ceramic tiles
Autor:
Entidad UPV: Universitat Politècnica de València. Departamento de Ingeniería Gráfica - Departament d'Enginyeria Gràfica
Fecha difusión:
Resumen:
In this paper we investigate the influence of the load application rate (V) on the calculation of the bending strength (¿ B) of extruded ceramic tiles using three-points bending test as stated by ISO 10545. We also evaluate ...[+]
Palabras clave: A. Extrusion , B. Failure analysis , C. Strength , D. Porcelain
Derechos de uso: Cerrado
Fuente:
Ceramics International. (issn: 0272-8842 )
DOI: 10.1016/j.ceramint.2012.10.022
Editorial:
Elsevier
Versión del editor: http://dx.doi.org/10.1016/j.ceramint.2012.10.022
Agradecimientos:
This research has been supported by the Spanish Ministry of Science and Innovation through the project "Optimal design platform for the manufacturing of ceramic tiles" (CIT-020000-2008-1); and by the Universitat Politecnica ...[+]
Tipo: Artículo

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem