- -

Comparative Analysis of Different Methods of Modeling the Thermal Effect of Circulating Blood Flow During RF Cardiac Ablation

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

Comparative Analysis of Different Methods of Modeling the Thermal Effect of Circulating Blood Flow During RF Cardiac Ablation

Mostrar el registro completo del ítem

González Suárez, A.; Berjano, E. (2016). Comparative Analysis of Different Methods of Modeling the Thermal Effect of Circulating Blood Flow During RF Cardiac Ablation. IEEE Transactions on Biomedical Engineering. 63(2):250-259. doi:10.1109/TBME.2015.2451178

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/77833

Ficheros en el ítem

Metadatos del ítem

Título: Comparative Analysis of Different Methods of Modeling the Thermal Effect of Circulating Blood Flow During RF Cardiac Ablation
Autor:
Entidad UPV: Universitat Politècnica de València. Escuela Técnica Superior de Ingeniería del Diseño - Escola Tècnica Superior d'Enginyeria del Disseny
Universitat Politècnica de València. Departamento de Ingeniería Electrónica - Departament d'Enginyeria Electrònica
Fecha difusión:
Resumen:
Our aim was to compare the different methods of modeling the effect of circulating blood flow on the thermal lesion dimensions created by radio frequency (RF) cardiac ablation and on the maximum blood temperature. ...[+]
Palabras clave: Blood flow , Cardiac ablation , Catheter ablation , Computer modeling , Radio frequency (RF) ablation , Thermal modeling
Derechos de uso: Reserva de todos los derechos
Fuente:
IEEE Transactions on Biomedical Engineering. (issn: 0018-9294 ) (eissn: 1558-2531 )
DOI: 10.1109/TBME.2015.2451178
Editorial:
Institute of Electrical and Electronics Engineers (IEEE)
Versión del editor: http://dx.doi.org/10.1109/TBME.2015.2451178
Descripción: © 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works
Agradecimientos:
This work was supported in part by the Spanish "Plan Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad" under Grant TEC2014-52383-C3 (TEC2014-52383-C3-1-R) and also by the Basque ...[+]
Tipo: Artículo

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem