- -

Experimental validation of an alternative method to predict high and low-temperature ignition delays under transient thermodynamic conditions for PRF mixtures using a Rapid Compression-Expansion Machine

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

Experimental validation of an alternative method to predict high and low-temperature ignition delays under transient thermodynamic conditions for PRF mixtures using a Rapid Compression-Expansion Machine

Mostrar el registro completo del ítem

Desantes Fernández, JM.; Bermúdez, V.; López, JJ.; López Pintor, D. (2016). Experimental validation of an alternative method to predict high and low-temperature ignition delays under transient thermodynamic conditions for PRF mixtures using a Rapid Compression-Expansion Machine. Energy Conversion and Management. 129:23-33. doi:10.1016/j.enconman.2016.09.089

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/80977

Ficheros en el ítem

Metadatos del ítem

Título: Experimental validation of an alternative method to predict high and low-temperature ignition delays under transient thermodynamic conditions for PRF mixtures using a Rapid Compression-Expansion Machine
Autor:
Entidad UPV: Universitat Politècnica de València. Escuela Técnica Superior de Ingeniería del Diseño - Escola Tècnica Superior d'Enginyeria del Disseny
Fecha difusión:
Resumen:
An alternative procedure to predict both high-temperature stage and cool flames ignition delays under transient thermodynamic conditions is intended to be validated in this paper. An experimental study has been carried ...[+]
Palabras clave: RCEM , Ignition delay , Autoignition modeling , Fuels , Chemical processes
Derechos de uso: Embargado
Fuente:
Energy Conversion and Management. (issn: 0196-8904 )
DOI: 10.1016/j.enconman.2016.09.089
Editorial:
Elsevier
Versión del editor: http://dx.doi.org/10.1016/j.enconman.2016.09.089
Agradecimientos:
The authors would like to thank different members of the CMT-Motores Termicos team of the Universitat Politecnica de Valencia for their contribution to this work. The authors would also like to thank the Spanish Ministry ...[+]
Tipo: Artículo

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem