Parallel Recording of Single Quantum Dot Optical Emission Using Multicore Fibers

Single Indium Arsenide Quantum Dot emission spectra have been recorded using a four-core, crosstalk-free, multicore fiber placed at the collection arm of a confocal microscope. We developed two different measurement set-ups depending on the relative configuration of the excitation and collection spots. In the single-matched mode, the emission from the excited area is collected by a single core in the multicore fiber, whereas the three remaining cores capture the emission from neighboring, non-excited areas. This procedure allows for the recording of the Quantum Dot emission from carrier diffusion between sample positions separated by more than 6 μm. In the multiple-matched mode, the excitation spot overlaps the four cores emission area. This configuration permits the acquisition of the micro-photoluminescence spectra at different sample positions without scanning. These results show the possibilities offered by multicore fibers for the spectroscopic analysis of single semiconductor Quantum Dot optical emission.

(c) 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.