Influence of liquid properties on ultrasonic atomization

Abstract

[EN] Ultrasonic atomization is very convenient because it can generate droplets with diameters of a few microns and with very narrow size distribution. Besides, opposite to twin fluid nozzles, in ultrasonic atomization, droplet generation and transport are decoupled processes. Droplets are ejected from the liquid surface with very low velocities, so driving them is relatively simple. Although this atomization method is now common in some specific applications, for example in household humidifiers, there are still some details about the physics of this process that are not completely understood. Up to date, most of the published results have been limited to experiments with water. However, it has been demonstrated that atomization rates quickly decrease as liquid viscosity increases. This work analyzes the characteristics of ultrasonic atomization of some alternative fluids to determine if there is any influence of other physical properties such as surface tension or vapor pressure. Experiments are performed using a commercial piezoceramic disk with a resonance frequency of 1.65 MHz. The disk is excited with a sinusoidal signal with voltage amplitudes that go up to 60 V. Sprays are visually characterized analyzing instantaneous images and high speed video sequences. Besides atomization rates are calculated by measuring the weight loss in a fixed time.