On the structural design of characteristic decks for three-span postensioned road flyovers

Abstract

[EN] This paper deals with the optimized design of two characteristic three-span road flyovers. The first characteristic sample structure is the deck of a 20-36-20 m flyover, which is typical of flyovers over double-lane double track motorways. The second characteristic structure is the deck of a 12-17-12 m flyover, which is typical of flyovers over double-track high-speed railways. The optimization procedure caters with the structural design of multiple voided slab decks for postensioned road flyovers. Design is encompassed by an optimized heuristic procedure. The paper shows the efficiency of a heuristic optimized design by the method of the simulated annealing (SA). The evaluation of solutions follows the mainframe of European and Spaniard codes of practice for structural concrete. The computation of stress resultants is carried out by an internal programming code. Road loading is in accordance to Eurocode 1. The decks have a typical 11.00 m width. The concrete section, prestressing and the passive reinforcement are defined by 35 design variables. These variables are for the compressive strength of concrete, 5 variables for the geometry of the cross-section and 29 variables for the active and passive reinforcement. The 5 geometrical variables of the cross-section are the depth, the width of the bottom nucleus, the length of the lateral cantilevers and the thicknesses of the starting and ending parts of the cantilever. The number and diameter of the circular voids is derived from the cross-section and the active prestressing. The 20-36-20 sample results in a slab-deck of 1.55 m of depth and 8 tendons of 17 ASTM strands. The 12-17-12 sample results in a slab-deck of 1.00 m of depth and 6 tendons of 10 ASTM strands. Computer running times are about 3400 seconds. It is concluded that the optimization procedure is apt and reliable for the design of postensioned slab decks.