Multi-sector thermo-physiological head simulator for headgear research

Vista sencilla de ítem
dc.contributor.authorMartínez Guillamón, Natividades_ES
dc.contributor.authorPsikuta, Agneses_ES
dc.contributor.authorCorberán, José M.es_ES
dc.contributor.authorRossi, Rene Micheles_ES
dc.contributor.authorAnnaheim, Simones_ES
dc.contributor.funderEuropean Cooperation in Science and Technologyes_ES
dc.contributor.funderStaatssekretariat für Bildung, Forschung und Innovation, Suizaes_ES
dc.date.accessioned2020-04-17T12:49:03Z
dc.date.available2020-04-17T12:49:03Z
dc.date.issued2017es_ES
dc.description.abstract[EN] A novel thermo-physiological human head simulator for headgear testing was developed by coupling a thermal head manikin with a thermo-physiological model. As the heat flux at head-site is directly measured by the head manikin, this method provides a realistic quantification of the heat transfer phenomena occurring in the headgear, such as moisture absorption-desorption cycles, condensation, moisture migration across clothing layers. Before coupling, the opportunities of the head manikin for representing the human physiology were evaluated separately. The evaluation revealed reduced precision in forehead and face temperature predictions under extreme heterogeneous temperature distributions and no initial limitation for simulating temperature changes observed in the human hysiology.en_EN
dc.description.accrualMethodSes_ES
dc.description.bibliographicCitationMartínez Guillamón, N.; Psikuta, A.; Corberán, JM.; Rossi, RM.; Annaheim, S. (2017). Multi-sector thermo-physiological head simulator for headgear research. International Journal of Biometeorology. 61(2):273-285. https://doi.org/10.1007/s00484-016-1209-9es_ES
dc.description.issue2es_ES
dc.description.referencesASTM F2370-10, 2010 (2010) Standard test method for measuring the evaporative resistance of clothing using a sweating manikin. ASTM International, West Conshohockenes_ES
dc.description.referencesBuono MJ, Ulrich RL (1998) Comparison of mean skin temperature using “covered” versus “uncovered” contact thermistors. Physiol Meas 19:297–300es_ES
dc.description.referencesBurton AC (1944) An analysis of the physiological effects of clothing in hot environments. National Research Council, Canadaes_ES
dc.description.referencesCasa DJ, Becker SM, Ganio MS, Brown CM, Yeargin SW, Roti MW, Siegler J, Blowers JA, Glaviano NR, Huggins RA, Armstrong LE, Maresh CM (2007) Validity of devices that assess body temperature during outdoor exercise in the heat. J Athl Train 42:333–342es_ES
dc.description.referencesCurran AR, Peck SD, Hepokoski MA, Burke RA (2014) Physiological model control of a sweating thermal manikin. In: Ambience’14&10i3m, Tampere, Finland, 7-9 Sept 2014, pp. 7–9es_ES
dc.description.referencesEaston C, Fudge BW, Pitsiladis YP (2007) Rectal, telemetry pill and tympanic membrane thermometry during exercise heat stress. J Therm Biol 32:78–86. doi: 10.1016/j.jtherbio.2006.10.004es_ES
dc.description.referencesFan J, Cheng X-J (2005a) Heat and moisture transfer with sorption and phase change through clothing assemblies: part I: experimental investigation. Text Res J 75:900–105. doi: 10.1177/004051750507500301es_ES
dc.description.referencesFan J, Cheng X-J (2005b) Heat and moisture transfer with sorption and phase change through clothing assemblies: part II: theoretical modeling, simulation, and comparison with experimental results. Text Res J 75:187–196. doi: 10.1177/004051750507500301es_ES
dc.description.referencesFarrington RB, Rugh JP, Bharathan D, Burke R (2004) Use of a thermal manikin to evaluate human thermoregulatory responses in transient, non-uniform, thermal environments. In: Society of Automotive Engineers Technical Paper. pp. 2004–01–2345. SAE International. doi: 10.4271/2004-01-2345es_ES
dc.description.referencesFarrington RB, Rugh JP, Bharathan D, Paul H, Bue G, Trevino L (2005). Using a sweating manikin, controlled by a human physiological model, to evaluate liquid cooling garments, in: Society of Automotive Engineers Technical Paper. doi: 10.4271/2005-01-2971es_ES
dc.description.referencesFiala D, Havenith G (2015) Modelling human heat transfer and temperature regulation, in: Springer-Verlag Berlin Heidelberg (Ed.), Studies in Mechanobiology, Tissue Engineering and Biomaterials. pp. 1–38. doi: 10.1007/8415es_ES
dc.description.referencesFiala D, Lomas KJ, Stohrer M (1999) A computer model of human thermoregulation for a wide range of environmental conditions: the passive system. J Appl Physiol 87:1957–1972es_ES
dc.description.referencesFiala D, Lomas KJ, Stohrer M (2001) Computer prediction of human thermoregulatory and temperature responses to a wide range of environmental conditions. Int J Biometeorol 45:143–159. doi: 10.1007/s004840100099es_ES
dc.description.referencesFiala D, Havenith G, Bröde P, Kampmann B, Jendritzky G (2012) UTCI-Fiala multi-node model of human heat transfer and temperature regulation. Int J Biometeorol 56:429–441. doi: 10.1007/s00484-011-0424-7es_ES
dc.description.referencesHaslam RA, Parsons KC (1994) Using computer-based models for predicting human thermal responses to hot and cold environments. Ergonomics 37:399–416. doi: 10.1080/00140139408963659es_ES
dc.description.referencesHavenith G, Richards MG, Wang X, Bröde P, Candas V, Den Hartog E, Holmér I, Kuklane K, Meinander H, Nocker W (2008) Apparent latent heat of evaporation from clothing: attenuation and heat pipe effects. J Appl Physiol 104:142–149. doi: 10.1152/japplphysiol.00612.2007es_ES
dc.description.referencesHavenith G, Bröde P, den Hartog E, Kuklane K, Holmer I, Rossi RM, Richards M, Farnworth B, Wang X (2013) Evaporative cooling: effective latent heat of evaporation in relation to evaporation distance from the skin. J Appl Physiol 114:778–785. doi: 10.1152/japplphysiol.01271.2012es_ES
dc.description.referencesISO15831 (2004) Clothing—physiological effects—measurement of thermal insulation by means of a thermal manikin. International Organisation for Standardisation, Geneva (Switzerland)es_ES
dc.description.referencesISO9920 (2007) Ergonomics of the thermal environment—estimation of thermal insulation and water vapour resistance of a clothing ensemble. International Organisation for Standardisation, Geneva (Switzerland)es_ES
dc.description.referencesJones BW (2002) Capabilities and limitations of thermal models for use in thermal comfort standards. Energy Build 34:653–659. doi: 10.1016/S0378-7788(02)00016-6es_ES
dc.description.referencesKobayashi Y, Tanabe S (2013) Development of JOS-2 human thermoregulation model with detailed vascular system. Build Environ 66:1–10. doi: 10.1016/j.buildenv.2013.04.013es_ES
dc.description.referencesLi Y, Li F, Liu Y, Luo Z (2004) An integrated model for simulating interactive thermal processes in human-clothing system. J Therm Biol 29:567–575. doi: 10.1016/j.jtherbio.2004.08.071es_ES
dc.description.referencesLotens WA (1993) Heat transfer from human wearing clothing. Techincal University Delft, Delftes_ES
dc.description.referencesLotens WA, Havenith G (1994) Effects of moisture absorption in clothing on the human heat balance. Ergonomics 38:1092–1113es_ES
dc.description.referencesLotens WA, van de Linde FJG, Havenith G (1995) Effect of condensation in clothing on heat transfer. Ergonomics 38:1114–1131es_ES
dc.description.referencesMäkinen T, Gavhed D, Holmér I, Rintamäki H (2000) Thermal responses to cold wind of thermoneutral and cooled subjects. Eur J Appl Physiol 81:397–402. doi: 10.1007/s004210050060es_ES
dc.description.referencesMartínez N, Psikuta A, Rossi RM, Corberán JM, Annaheim S, (2016) Global and local heat transfer analysis for bicycle helmets using thermal head manikins. Int J Ind Ergon. 53:157–166. doi: 10.1016/j.ergon.2015.11.012es_ES
dc.description.referencesMartínez N, Psikuta A, Annaheim S, Corberán JM, Rossi RM (2015) Validation of a physiological model for controlling a thermal head simulator. 16th International Conference on Environmental Ergonomics, Portsmouthes_ES
dc.description.referencesMunir A, Takada S, Matsushita T (2009) Re-evaluation of Stolwijk’s 25-node human thermal model under thermal-transient conditions: prediction of skin temperature in low-activity conditions. Build Environ 44:1777–1787. doi: 10.1016/j.buildenv.2008.11.016es_ES
dc.description.referencesNiedermann R, Wyss E, Annaheim S, Psikuta A, Davey S, Rossi RM (2014) Prediction of human core body temperature using non-invasive measurement methods. Int J Biometeorol 58:7–15. doi: 10.1007/s00484-013-0687-2es_ES
dc.description.referencesPriego Quesada JI, Martínez Guillamón N, Cibrián Ortiz De Anda RM, Psikuta A, Annaheim S, Rossi RM, Corberán Salvador JM, Pérez Soriano P, Salvador Palmer R (2015) Effect of perspiration on skin temperature measurements by infrared thermography and contact thermometry during aerobic cycling. Infrared Phys Technol 72:68–76. doi: 10.1016/j.infrared.2015.07.008es_ES
dc.description.referencesPsikuta A (2009) Development of an “artificial human” for clothing research. De Monfort University, Leicesteres_ES
dc.description.referencesPsikuta A, Richards M, Fiala D (2008) Single-sector thermophysiological human simulator. Physiol Meas 29:181–192es_ES
dc.description.referencesPsikuta A, Fiala D, Laschewski G, Jendritzky G, Richards M, Blazejczyk K, Mekjavič I, Rintamäki H, de Dear R, Havenith G (2012) Validation of the Fiala multi-node thermophysiological model for UTCI application. Int J Biometeorol 56:443–460es_ES
dc.description.referencesPsikuta A, Niedermann R, Rossi RM (2013a) Effect of ambient temperature and attachment method on surface temperature measurements. Int J Biometeorol. doi: 10.1007/s00484-013-0669-4es_ES
dc.description.referencesPsikuta A, Wang L-C, Rossi RM (2013b) Prediction of the physiological response of humans wearing protective clothing using a thermophysiological human simulator. J Occup Environ Hyg 10:222–232. doi: 10.1080/15459624.2013.766562es_ES
dc.description.referencesPsikuta A, Kuklane K, Bogdan A, Havenith G, Annaheim S, Rossi RM (2016) Opportunities and constraints of presently used thermal manikins for thermophysiological simulation of the human body. Int J Biometeorol 60:435–446. doi: 10.1007/s00484-015-1041-7es_ES
dc.description.referencesRedortier B, Voelcker T (2010) Implementation of thermo-physiological control on a multi-zone manikin. In: 8th International Meeting for Thermal Manikin and Modeling (8I3M), Victoria, Canada, 22-26 August 2010es_ES
dc.description.referencesRedortier B, Voelcker T (2011) A 38-zone thermal manikin with physiological control: validation for simulating thermal response of the body for sports exercise in cold and hot environment, in: 14th International Conference on Environmental Ergonomics. Napflio, Greecees_ES
dc.description.referencesRugh JP, Farrington RB, Bharathan D, Vlahinos A, Burke R, Huizenga C, Zhang H (2004) Predicting human thermal comfort in a transient nonuniform thermal environment. Eur J Appl Physiol 92:721–727es_ES
dc.description.referencesSmith CE (1991) A transient three-dimensional model of the thermal system. MSc thesis, Kansas State University, Kansases_ES
dc.description.referencesStolwijk JA (1971) A mathematical model of physiological temperature regulation in man. NASA Contractor Report No. CR-1855, National Aeronautics and Space Administration, Washington, DCes_ES
dc.description.referencesTanabe S, Kobayashi K, Nakano J, Ozeki Y (2002) Evaluation of thermal comfort using combined multi-node thermoregulation (65MN) and radiation models and computational fluid dynamics (CFD). Energy Build 34:637–646es_ES
dc.description.referencesTeunissen LPJ, de Haan A, de Koning JJ, Daanen HAM (2012) Telemetry pill versus rectal and esophageal temperature during extreme rates of exercise-induced core temperature change. Physiol Meas 33:915–924. doi: 10.1088/0967-3334/33/6/915es_ES
dc.description.referencesWagner JA, Horvath SM (1985) Influences of age and gender on human thermoregulatory responses to cold exposures. J Appl Physiol 58:180–186es_ES
dc.description.referencesWerner J, Webb P (1993) A six-cylinder model of human thermoregulation for general use on personal computers. Ann Physiol Anthropol 12:123–134. doi: 10.2114/ahs1983.12.123es_ES
dc.description.referencesWissler EH (1985) Mathematical simulation of human thermal behaviour using whole body models. In: Shitzer A, E.R.C. 1198 (eds) Heat transfer in medicine and biology—analysis and applications, vol 13. Plenum, New York, pp 325–373es_ES
dc.description.referencesWissler EH, Havenith G (2009) A simple theoretical model of heat and moisture transport in multi-layer garments in cool ambient air. Eur J Appl Physiol 105:797–808. doi: 10.1007/s00421-008-0966-5es_ES
dc.description.referencesWu H, Fan J (2008) Study of heat and moisture transfer within multi-layer clothing assemblies consisting of different types of battings. Int J Therm Sci 47:641–647. doi: 10.1016/j.ijthermalsci.2007.04.008es_ES
dc.description.referencesXu X, Werner J (1997) A dynamic model of the human/clothing/environment-system. Appl Hum Sc 16:61–75es_ES
dc.description.referencesZhang H (2003) Human thermal sensation and comfort in transient and non-uniform thermal environments. University of California, Berkeleyes_ES
dc.description.sponsorshipThis work has been supported by the State Secretariat for Education, Research and Innovation (SBFI C11.0137) under the grant COST Action TU1101 project (http://www.bicycle-helmets.eu/) The authors gratefully acknowledge Dr. Matthew Morrissey and Rolf Stampfli from Empa (St. Gallen, Switzerland) for their valuable contribution to programming of the coupling interface and Barbara Koelblen from Empa (St. Gallen, Switzerland) and Warsaw University of Technology (Warsaw, Poland) for providing the validation data and consultation.es_ES
dc.description.upvformatpfin285es_ES
dc.description.upvformatpinicio273es_ES
dc.description.volume61es_ES
dc.identifier.doi10.1007/s00484-016-1209-9es_ES
dc.identifier.issn0020-7128es_ES
dc.identifier.urihttps://riunet.upv.es/handle/10251/140867
dc.languageIngléses_ES
dc.publisherSpringer-Verlages_ES
dc.relation.ispartofInternational Journal of Biometeorologyes_ES
dc.relation.pasarelaS\332616es_ES
dc.relation.projectIDinfo:eu-repo/grantAgreement/COST//TU1101/EU/Towards safer bicycling through optimization of bicycle helmets and usage/es_ES
dc.relation.projectIDinfo:eu-repo/grantAgreement/SBFI//C11.0137/CH/Prediction of wearing comfort of bicycle helmets/es_ES
dc.relation.publisherversionhttps://doi.org/10.1007/s00484-016-1209-9es_ES
dc.relation.references10.1088/0967-3334/19/2/016es_ES
dc.relation.references10.1016/j.jtherbio.2006.10.004es_ES
dc.relation.references10.1177/004051750507500301es_ES
dc.relation.references10.4271/2004-01-2345es_ES
dc.relation.references10.4271/2005-01-2971es_ES
dc.relation.references10.1007/8415es_ES
dc.relation.references10.1152/jappl.1999.87.5.1957es_ES
dc.relation.references10.1007/s004840100099es_ES
dc.relation.references10.1007/s00484-011-0424-7es_ES
dc.relation.references10.1080/00140139408963659es_ES
dc.relation.references10.1152/japplphysiol.00612.2007es_ES
dc.relation.references10.1152/japplphysiol.01271.2012es_ES
dc.relation.references10.1016/S0378-7788(02)00016-6es_ES
dc.relation.references10.1016/j.buildenv.2013.04.013es_ES
dc.relation.references10.1016/j.jtherbio.2004.08.071es_ES
dc.relation.references10.1080/00140139508925176es_ES
dc.relation.references10.1080/00140139508925177es_ES
dc.relation.references10.1007/s004210050060es_ES
dc.relation.references10.1016/j.ergon.2015.11.012es_ES
dc.relation.references10.1016/j.buildenv.2008.11.016es_ES
dc.relation.references10.1007/s00484-013-0687-2es_ES
dc.relation.references10.1016/j.infrared.2015.07.008es_ES
dc.relation.references10.1088/0967-3334/29/2/002es_ES
dc.relation.references10.1007/s00484-011-0450-5es_ES
dc.relation.references10.1007/s00484-013-0669-4es_ES
dc.relation.references10.1080/15459624.2013.766562es_ES
dc.relation.references10.1007/s00484-015-1041-7es_ES
dc.relation.references10.1007/s00421-004-1125-2es_ES
dc.relation.references10.1016/S0378-7788(02)00014-2es_ES
dc.relation.references10.1088/0967-3334/33/6/915es_ES
dc.relation.references10.1152/jappl.1985.58.1.180es_ES
dc.relation.references10.2114/ahs1983.12.123es_ES
dc.relation.references10.1007/s00421-008-0966-5es_ES
dc.relation.references10.1016/j.ijthermalsci.2007.04.008es_ES
dc.relation.references10.2114/jpa.16.61es_ES
dc.rightsReserva de todos los derechoses_ES
dc.rights.accessRightsCerradoes_ES
dc.subjectThermo-physiologyes_ES
dc.subjectHead simulatores_ES
dc.subjectHeadgeares_ES
dc.subject.classificationMAQUINAS Y MOTORES TERMICOSes_ES
dc.titleMulti-sector thermo-physiological head simulator for headgear researches_ES
dc.typeArtículoes_ES
dc.type.versioninfo:eu-repo/semantics/publishedVersiones_ES
dspace.entity.typePublication
upv.uuidea14d0e6-12e3-49cf-9420-e9a2a4c02d8bes_ES

Archivos

Bloque original

Mostrando 1 - 1 de 1
Miniatura
Nombre:
Martínez;Psikuta;Corberán - Multi-sector thermo-physiological head simulator for headgear research.pdf
Tamaño:
950.34 KB
Formato:
Adobe Portable Document Format
Descripción:
Versión editorial
Descargar

Colecciones

Artículos, conferencias, monografías