Mostrar el registro sencillo del ítem
dc.contributor.author | Agüero-Rodríguez, Ángel | es_ES |
dc.contributor.author | Quiles-Carrillo, Luis | es_ES |
dc.contributor.author | Jorda-Vilaplana, Amparo | es_ES |
dc.contributor.author | Fenollar, Octavio | es_ES |
dc.contributor.author | Montanes, Nestor | es_ES |
dc.date.accessioned | 2020-04-24T07:14:10Z | |
dc.date.available | 2020-04-24T07:14:10Z | |
dc.date.issued | 2019 | es_ES |
dc.identifier.issn | 0959-8103 | es_ES |
dc.identifier.uri | http://hdl.handle.net/10251/141454 | |
dc.description.abstract | [EN] Environmentally friendly composites from poly(lactic acid) (PLA) and diatomaceous earth (DE) were successfully manufactured by extrusion, followed by injection moulding. DE was used as a filler; several compatibilizer/coupling agents, namely (3-glycidyloxypropyl)trimethoxysilane, epoxy styrene acrylic oligomer and maleinized linseed oil, were used to improve polymer¿filler interactions. Mechanical characterization was carried out by standard tensile, impact and hardness tests while morphological characterization of the fractured surfaces was conducted by field emission scanning electron microscopy. The effect of DE was evaluated by differential scanning calorimetry and dynamic mechanical thermal behaviour. The results show that the addition of DE provides an improved tensile modulus and induces more brittle composites due to stress concentration phenomena. The addition of compatibilizers in PLA-DE positively contributes to improve ductile properties, thus leading to high environmental efficiency materials with balancedmechanical properties. Specifically, the compatibility improvement between the PLA and DE was good with maleinized linseed oil and contributed to improving the impact strength, which is a key factor in PLA-based composites due to the intrinsic brittleness of neat PLA. | es_ES |
dc.description.sponsorship | This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) program number MAT2017-84909-C2-2-R. L. Quiles-Carrillo wants to thank GV for his FPI grant (ACIF/2016/182) and the MECD for his FPU grant (FPU15/03812). | es_ES |
dc.language | Inglés | es_ES |
dc.publisher | John Wiley & Sons | es_ES |
dc.relation.ispartof | Polymer International | es_ES |
dc.rights | Reserva de todos los derechos | es_ES |
dc.subject | Poly(lactic acid) | es_ES |
dc.subject | Diatomaceous earth | es_ES |
dc.subject | Composites | es_ES |
dc.subject | Natural fillers | es_ES |
dc.subject.classification | CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA | es_ES |
dc.subject.classification | EXPRESION GRAFICA EN LA INGENIERIA | es_ES |
dc.title | Effect of different compatibilizers on environmentally friendly composites from poly(lactic acid) and diatomaceous earth | es_ES |
dc.type | Artículo | es_ES |
dc.identifier.doi | 10.1002/pi.5779 | es_ES |
dc.relation.projectID | info:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016/MAT2017-84909-C2-2-R/ES/PROCESADO Y OPTIMIZACION DE MATERIALES AVANZADOS DERIVADOS DE ESTRUCTURAS PROTEICAS Y COMPONENTES LIGNOCELULOSICOS/ | es_ES |
dc.relation.projectID | info:eu-repo/grantAgreement/GVA//ACIF%2F2016%2F182/ | es_ES |
dc.relation.projectID | info:eu-repo/grantAgreement/MECD//FPU15%2F03812/ES/FPU15%2F03812/ | es_ES |
dc.rights.accessRights | Abierto | es_ES |
dc.contributor.affiliation | Universitat Politècnica de València. Departamento de Ingeniería Mecánica y de Materiales - Departament d'Enginyeria Mecànica i de Materials | es_ES |
dc.contributor.affiliation | Universitat Politècnica de València. Instituto de Tecnología de Materiales - Institut de Tecnologia de Materials | es_ES |
dc.contributor.affiliation | Universitat Politècnica de València. Departamento de Ingeniería Gráfica - Departament d'Enginyeria Gràfica | es_ES |
dc.description.bibliographicCitation | Agüero-Rodríguez, Á.; Quiles-Carrillo, L.; Jorda-Vilaplana, A.; Fenollar, O.; Montanes, N. (2019). Effect of different compatibilizers on environmentally friendly composites from poly(lactic acid) and diatomaceous earth. Polymer International. 68(5):893-903. https://doi.org/10.1002/pi.5779 | es_ES |
dc.description.accrualMethod | S | es_ES |
dc.relation.publisherversion | https://doi.org/10.1002/pi.5779 | es_ES |
dc.description.upvformatpinicio | 893 | es_ES |
dc.description.upvformatpfin | 903 | es_ES |
dc.type.version | info:eu-repo/semantics/publishedVersion | es_ES |
dc.description.volume | 68 | es_ES |
dc.description.issue | 5 | es_ES |
dc.relation.pasarela | S\382194 | es_ES |
dc.contributor.funder | Generalitat Valenciana | es_ES |
dc.contributor.funder | Ministerio de Educación, Cultura y Deporte | es_ES |
dc.contributor.funder | Agencia Estatal de Investigación | es_ES |
dc.description.references | Tornuk, F., Hancer, M., Sagdic, O., & Yetim, H. (2015). LLDPE based food packaging incorporated with nanoclays grafted with bioactive compounds to extend shelf life of some meat products. LWT - Food Science and Technology, 64(2), 540-546. doi:10.1016/j.lwt.2015.06.030 | es_ES |
dc.description.references | Kuswandi, B., Jayus, Restyana, A., Abdullah, A., Heng, L. Y., & Ahmad, M. (2012). A novel colorimetric food package label for fish spoilage based on polyaniline film. Food Control, 25(1), 184-189. doi:10.1016/j.foodcont.2011.10.008 | es_ES |
dc.description.references | Kuswandi, B. (2017). Environmental friendly food nano-packaging. Environmental Chemistry Letters, 15(2), 205-221. doi:10.1007/s10311-017-0613-7 | es_ES |
dc.description.references | Horodytska, O., Valdés, F. J., & Fullana, A. (2018). Plastic flexible films waste management – A state of art review. Waste Management, 77, 413-425. doi:10.1016/j.wasman.2018.04.023 | es_ES |
dc.description.references | Trongsatitkul, T., & Chaiwong, S. (2017). In situ fibre-reinforced composite films of poly(lactic acid)/low-density polyethylene blends: effects of composition on morphology, transport and mechanical properties. Polymer International, 66(11), 1456-1462. doi:10.1002/pi.5449 | es_ES |
dc.description.references | Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016). Development and characterization of sugar palm starch and poly(lactic acid) bilayer films. Carbohydrate Polymers, 146, 36-45. doi:10.1016/j.carbpol.2016.03.051 | es_ES |
dc.description.references | Brandelli, A., Brum, L. F. W., & dos Santos, J. H. Z. (2017). Nanostructured bioactive compounds for ecological food packaging. Environmental Chemistry Letters, 15(2), 193-204. doi:10.1007/s10311-017-0621-7 | es_ES |
dc.description.references | Rhim, J.-W., Park, H.-M., & Ha, C.-S. (2013). Bio-nanocomposites for food packaging applications. Progress in Polymer Science, 38(10-11), 1629-1652. doi:10.1016/j.progpolymsci.2013.05.008 | es_ES |
dc.description.references | Kumar, S., & Maiti, P. (2015). Understanding the controlled biodegradation of polymers using nanoclays. Polymer, 76, 25-33. doi:10.1016/j.polymer.2015.08.044 | es_ES |
dc.description.references | Yahiaoui, F., Benhacine, F., Ferfera-Harrar, H., Habi, A., Hadj-Hamou, A. S., & Grohens, Y. (2014). Development of antimicrobial PCL/nanoclay nanocomposite films with enhanced mechanical and water vapor barrier properties for packaging applications. Polymer Bulletin, 72(2), 235-254. doi:10.1007/s00289-014-1269-0 | es_ES |
dc.description.references | Ibarguren, C., Naranjo, P. M., Stötzel, C., Audisio, M. C., Sham, E. L., Farfán Torres, E. M., & Müller, F. A. (2014). Adsorption of nisin on raw montmorillonite. Applied Clay Science, 90, 88-95. doi:10.1016/j.clay.2013.12.031 | es_ES |
dc.description.references | Kuswandi, B. (2016). Nanotechnology in Food Packaging. Sustainable Agriculture Reviews, 151-183. doi:10.1007/978-3-319-39303-2_6 | es_ES |
dc.description.references | Wróblewska-Krepsztul, J., Rydzkowski, T., Borowski, G., Szczypiński, M., Klepka, T., & Thakur, V. K. (2018). Recent progress in biodegradable polymers and nanocomposite-based packaging materials for sustainable environment. International Journal of Polymer Analysis and Characterization, 23(4), 383-395. doi:10.1080/1023666x.2018.1455382 | es_ES |
dc.description.references | Gorrasi, G., Tortora, M., Vittoria, V., Pollet, E., Lepoittevin, B., Alexandre, M., & Dubois, P. (2003). Vapor barrier properties of polycaprolactone montmorillonite nanocomposites: effect of clay dispersion. Polymer, 44(8), 2271-2279. doi:10.1016/s0032-3861(03)00108-3 | es_ES |
dc.description.references | Pasbakhsh, P., De Silva, R., Vahedi, V., & Jock Churchman, G. (2016). Halloysite nanotubes: prospects and challenges of their use as additives and carriers – A focused review. Clay Minerals, 51(3), 479-487. doi:10.1180/claymin.2016.051.3.15 | es_ES |
dc.description.references | Bendahou, D., Bendahou, A., Grohens, Y., & Kaddami, H. (2015). New nanocomposite design from zeolite and poly(lactic acid). Industrial Crops and Products, 72, 107-118. doi:10.1016/j.indcrop.2014.12.055 | es_ES |
dc.description.references | Lorite, G. S., Rocha, J. M., Miilumäki, N., Saavalainen, P., Selkälä, T., Morales-Cid, G., … Toth, G. (2017). Evaluation of physicochemical/microbial properties and life cycle assessment (LCA) of PLA-based nanocomposite active packaging. LWT, 75, 305-315. doi:10.1016/j.lwt.2016.09.004 | es_ES |
dc.description.references | Cacciotti, I., Mori, S., Cherubini, V., & Nanni, F. (2018). Eco-sustainable systems based on poly(lactic acid), diatomite and coffee grounds extract for food packaging. International Journal of Biological Macromolecules, 112, 567-575. doi:10.1016/j.ijbiomac.2018.02.018 | es_ES |
dc.description.references | Davoudizadeh, S., Ghasemi, M., Khezri, K., & Bahadorikhalili, S. (2017). Poly(styrene-co-butyl acrylate)/mesoporous diatomaceous earth mineral nanocomposites by in situ AGET ATRP. Journal of Thermal Analysis and Calorimetry, 131(3), 2513-2521. doi:10.1007/s10973-017-6771-9 | es_ES |
dc.description.references | Aw, M. S., Simovic, S., Yu, Y., Addai-Mensah, J., & Losic, D. (2012). Porous silica microshells from diatoms as biocarrier for drug delivery applications. Powder Technology, 223, 52-58. doi:10.1016/j.powtec.2011.04.023 | es_ES |
dc.description.references | Medarevic, D., Losic, D., & Ibric, S. (2016). Diatoms - nature materials with great potential for bioapplications. Hemijska industrija, 70(6), 613-627. doi:10.2298/hemind150708069m | es_ES |
dc.description.references | Özen, İ., Şimşek, S., & Okyay, G. (2015). Manipulating surface wettability and oil absorbency of diatomite depending on processing and ambient conditions. Applied Surface Science, 332, 22-31. doi:10.1016/j.apsusc.2015.01.149 | es_ES |
dc.description.references | Torres-Giner, S., Montanes, N., Boronat, T., Quiles-Carrillo, L., & Balart, R. (2016). Melt grafting of sepiolite nanoclay onto poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by reactive extrusion with multi-functional epoxy-based styrene-acrylic oligomer. European Polymer Journal, 84, 693-707. doi:10.1016/j.eurpolymj.2016.09.057 | es_ES |
dc.description.references | Quiles-Carrillo, L., Montanes, N., Lagaron, J. M., Balart, R., & Torres-Giner, S. (2018). On the use of acrylated epoxidized soybean oil as a reactive compatibilizer in injection-molded compostable pieces consisting of polylactide filled with orange peel flour. Polymer International, 67(10), 1341-1351. doi:10.1002/pi.5588 | es_ES |
dc.description.references | Samper, M. D., Petrucci, R., Sánchez-Nacher, L., Balart, R., & Kenny, J. M. (2014). Effect of silane coupling agents on basalt fiber-epoxidized vegetable oil matrix composite materials analyzed by the single fiber fragmentation technique. Polymer Composites, 36(7), 1205-1212. doi:10.1002/pc.23023 | es_ES |
dc.description.references | Khan, M. A., & Hassan, M. M. (2006). Effect of γ-aminopropyl trimethoxy silane on the performance of jute–polycarbonate composites. Journal of Applied Polymer Science, 100(5), 4142-4154. doi:10.1002/app.23441 | es_ES |
dc.description.references | Quiles-Carrillo, L., Montanes, N., Sammon, C., Balart, R., & Torres-Giner, S. (2018). Compatibilization of highly sustainable polylactide/almond shell flour composites by reactive extrusion with maleinized linseed oil. Industrial Crops and Products, 111, 878-888. doi:10.1016/j.indcrop.2017.10.062 | es_ES |
dc.description.references | Ferri, J. M., Garcia-Garcia, D., Sánchez-Nacher, L., Fenollar, O., & Balart, R. (2016). The effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends. Carbohydrate Polymers, 147, 60-68. doi:10.1016/j.carbpol.2016.03.082 | es_ES |
dc.description.references | Tábi, T., Égerházi, A. Z., Tamás, P., Czigány, T., & Kovács, J. G. (2014). Investigation of injection moulded poly(lactic acid) reinforced with long basalt fibres. Composites Part A: Applied Science and Manufacturing, 64, 99-106. doi:10.1016/j.compositesa.2014.05.001 | es_ES |
dc.description.references | Re, G. L., Benali, S., Habibi, Y., Raquez, J.-M., & Dubois, P. (2014). Stereocomplexed PLA nanocomposites: From in situ polymerization to materials properties. European Polymer Journal, 54, 138-150. doi:10.1016/j.eurpolymj.2014.03.004 | es_ES |
dc.description.references | Garcia-Campo, M., Quiles-Carrillo, L., Masia, J., Reig-Pérez, M., Montanes, N., & Balart, R. (2017). Environmentally Friendly Compatibilizers from Soybean Oil for Ternary Blends of Poly(lactic acid)-PLA, Poly(ε-caprolactone)-PCL and Poly(3-hydroxybutyrate)-PHB. Materials, 10(11), 1339. doi:10.3390/ma10111339 | es_ES |
dc.description.references | Mauck, S. C., Wang, S., Ding, W., Rohde, B. J., Fortune, C. K., Yang, G., … Robertson, M. L. (2016). Biorenewable Tough Blends of Polylactide and Acrylated Epoxidized Soybean Oil Compatibilized by a Polylactide Star Polymer. Macromolecules, 49(5), 1605-1615. doi:10.1021/acs.macromol.5b02613 | es_ES |
dc.description.references | Ferri, J. M., Garcia-Garcia, D., Montanes, N., Fenollar, O., & Balart, R. (2017). The effect of maleinized linseed oil as biobased plasticizer in poly(lactic acid)-based formulations. Polymer International, 66(6), 882-891. doi:10.1002/pi.5329 | es_ES |
dc.description.references | Silverajah, V. S. G., Ibrahim, N. A., Zainuddin, N., Yunus, W. M. Z. W., & Hassan, H. A. (2012). Mechanical, Thermal and Morphological Properties of Poly(lactic acid)/Epoxidized Palm Olein Blend. Molecules, 17(10), 11729-11747. doi:10.3390/molecules171011729 | es_ES |
dc.description.references | Chieng, B., Ibrahim, N., Then, Y., & Loo, Y. (2014). Epoxidized Vegetable Oils Plasticized Poly(lactic acid) Biocomposites: Mechanical, Thermal and Morphology Properties. Molecules, 19(10), 16024-16038. doi:10.3390/molecules191016024 | es_ES |
dc.description.references | Liu, H., & Zhang, J. (2011). Research progress in toughening modification of poly(lactic acid). Journal of Polymer Science Part B: Polymer Physics, 49(15), 1051-1083. doi:10.1002/polb.22283 | es_ES |
dc.description.references | Carbonell-Verdu, A., Bernardi, L., Garcia-Garcia, D., Sanchez-Nacher, L., & Balart, R. (2015). Development of environmentally friendly composite matrices from epoxidized cottonseed oil. European Polymer Journal, 63, 1-10. doi:10.1016/j.eurpolymj.2014.11.043 | es_ES |
dc.description.references | Carbonell-Verdu, A., Samper, M. D., Garcia-Garcia, D., Sanchez-Nacher, L., & Balart, R. (2017). Plasticization effect of epoxidized cottonseed oil (ECSO) on poly(lactic acid). Industrial Crops and Products, 104, 278-286. doi:10.1016/j.indcrop.2017.04.050 | es_ES |
dc.description.references | Quiles-Carrillo, L., Duart, S., Montanes, N., Torres-Giner, S., & Balart, R. (2018). Enhancement of the mechanical and thermal properties of injection-molded polylactide parts by the addition of acrylated epoxidized soybean oil. Materials & Design, 140, 54-63. doi:10.1016/j.matdes.2017.11.031 | es_ES |
dc.description.references | Ali, F., Chang, Y.-W., Kang, S. C., & Yoon, J. Y. (2008). Thermal, mechanical and rheological properties of poly (lactic acid)/epoxidized soybean oil blends. Polymer Bulletin, 62(1), 91-98. doi:10.1007/s00289-008-1012-9 | es_ES |
dc.description.references | Xu, Y.-Q., & Qu, J.-P. (2009). Mechanical and rheological properties of epoxidized soybean oil plasticized poly(lactic acid). Journal of Applied Polymer Science, 112(6), 3185-3191. doi:10.1002/app.29797 | es_ES |
dc.description.references | Garcia-Garcia, D., Ferri, J. M., Montanes, N., Lopez-Martinez, J., & Balart, R. (2016). Plasticization effects of epoxidized vegetable oils on mechanical properties of poly(3-hydroxybutyrate). Polymer International, 65(10), 1157-1164. doi:10.1002/pi.5164 | es_ES |
dc.description.references | Arrieta, M. P., Castro-López, M. del M., Rayón, E., Barral-Losada, L. F., López-Vilariño, J. M., López, J., & González-Rodríguez, M. V. (2014). Plasticized Poly(lactic acid)–Poly(hydroxybutyrate) (PLA–PHB) Blends Incorporated with Catechin Intended for Active Food-Packaging Applications. Journal of Agricultural and Food Chemistry, 62(41), 10170-10180. doi:10.1021/jf5029812 | es_ES |
dc.description.references | Pilla, S., Kramschuster, A., Yang, L., Lee, J., Gong, S., & Turng, L.-S. (2009). Microcellular injection-molding of polylactide with chain-extender. Materials Science and Engineering: C, 29(4), 1258-1265. doi:10.1016/j.msec.2008.10.027 | es_ES |
dc.description.references | Singh, S., Ghosh, A. K., Maiti, S. N., Raha, S., Gupta, R. K., & Bhattacharya, S. (2011). Morphology and rheological behavior of polylactic acid/clay nanocomposites. Polymer Engineering & Science, 52(1), 225-232. doi:10.1002/pen.22074 | es_ES |
dc.description.references | B., A., Suin, S., & Khatua, B. B. (2014). Highly exfoliated eco-friendly thermoplastic starch (TPS)/poly (lactic acid)(PLA)/clay nanocomposites using unmodified nanoclay. Carbohydrate Polymers, 110, 430-439. doi:10.1016/j.carbpol.2014.04.024 | es_ES |
dc.description.references | Pluta, M., Jeszka, J. K., & Boiteux, G. (2007). Polylactide/montmorillonite nanocomposites: Structure, dielectric, viscoelastic and thermal properties. European Polymer Journal, 43(7), 2819-2835. doi:10.1016/j.eurpolymj.2007.04.009 | es_ES |
dc.description.references | Paul, M.-A., Delcourt, C., Alexandre, M., Degée, P., Monteverde, F., & Dubois, P. (2005). Polylactide/montmorillonite nanocomposites: study of the hydrolytic degradation. Polymer Degradation and Stability, 87(3), 535-542. doi:10.1016/j.polymdegradstab.2004.10.011 | es_ES |
dc.description.references | Palsikowski, P. A., Kuchnier, C. N., Pinheiro, I. F., & Morales, A. R. (2017). Biodegradation in Soil of PLA/PBAT Blends Compatibilized with Chain Extender. Journal of Polymers and the Environment, 26(1), 330-341. doi:10.1007/s10924-017-0951-3 | es_ES |