- -

One-dimensional modeling of the interaction between close-coupled injection events for a ballistic solenoid injector

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

  • Estadisticas de Uso

One-dimensional modeling of the interaction between close-coupled injection events for a ballistic solenoid injector

Mostrar el registro completo del ítem

Payri, R.; De La Morena, J.; Pagano, V.; Hussain, A.; Sammut, G.; Smith, L. (2019). One-dimensional modeling of the interaction between close-coupled injection events for a ballistic solenoid injector. International Journal of Engine Research. 20(4):452-469. https://doi.org/10.1177/1468087418760973

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/157576

Ficheros en el ítem

Thumbnail
Nombre: Payri;De;Pagano - ...
Tamaño: 2.206Mb
Formato: PDF
Descripción: Versión del Autor.
Abrir/Preview
[Cerrado]
Nombre: Payri_IJER_2019_G ...
Tamaño: 3.614Mb
Formato: PDF
Descripción: Versión editorial
Solicitar una copia al autor

Metadatos del ítem

Título: One-dimensional modeling of the interaction between close-coupled injection events for a ballistic solenoid injector
Autor: Payri, Raul De La Morena, Joaquín Pagano, Vincenzo Hussain, Ali Sammut, Gilbert Smith, Les
Entidad UPV: Universitat Politècnica de València. Departamento de Máquinas y Motores Térmicos - Departament de Màquines i Motors Tèrmics
Fecha difusión:
Resumen:
[EN] In this article, an investigation of a solenoid common-rail injector has been carried out to understand the hydraulic interactions between close-coupled injection events. For this purpose, a one-dimensional model of ...[+]
Palabras clave: Diesel , Injection , One-dimensional model , Multiple injections , Solenoid
Derechos de uso: Reconocimiento - No comercial - Sin obra derivada (by-nc-nd)
Fuente:
International Journal of Engine Research. (issn: 1468-0874 )
DOI: 10.1177/1468087418760973
Editorial:
SAGE Publications
Versión del editor: https://doi.org/10.1177/1468087418760973
Descripción: This is the author s version of a work that was accepted for publication in International Journal of Engine Research. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published as https://doi.org/10.1177/1468087418760973
Agradecimientos:
The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors would like to thank Jaguar Land Rover Limited for sponsoring this work.
Tipo: Artículo

References

Khalek, I. A., Blanks, M. G., Merritt, P. M., & Zielinska, B. (2015). Regulated and unregulated emissions from modern 2010 emissions-compliant heavy-duty on-highway diesel engines. Journal of the Air & Waste Management Association, 65(8), 987-1001. doi:10.1080/10962247.2015.1051606

Kim, H. J., Park, S. H., & Lee, C. S. (2016). Impact of fuel spray angles and injection timing on the combustion and emission characteristics of a high-speed diesel engine. Energy, 107, 572-579. doi:10.1016/j.energy.2016.04.035

Mohan, B., Yang, W., & Chou, S. kiang. (2013). Fuel injection strategies for performance improvement and emissions reduction in compression ignition engines—A review. Renewable and Sustainable Energy Reviews, 28, 664-676. doi:10.1016/j.rser.2013.08.051 [+]
Khalek, I. A., Blanks, M. G., Merritt, P. M., & Zielinska, B. (2015). Regulated and unregulated emissions from modern 2010 emissions-compliant heavy-duty on-highway diesel engines. Journal of the Air & Waste Management Association, 65(8), 987-1001. doi:10.1080/10962247.2015.1051606

Kim, H. J., Park, S. H., & Lee, C. S. (2016). Impact of fuel spray angles and injection timing on the combustion and emission characteristics of a high-speed diesel engine. Energy, 107, 572-579. doi:10.1016/j.energy.2016.04.035

Mohan, B., Yang, W., & Chou, S. kiang. (2013). Fuel injection strategies for performance improvement and emissions reduction in compression ignition engines—A review. Renewable and Sustainable Energy Reviews, 28, 664-676. doi:10.1016/j.rser.2013.08.051

Payri, R., Salvador, F. J., Gimeno, J., & de la Morena, J. (2009). Effects of nozzle geometry on direct injection diesel engine combustion process. Applied Thermal Engineering, 29(10), 2051-2060. doi:10.1016/j.applthermaleng.2008.10.009

Payri, R., Viera, J. P., Gopalakrishnan, V., & Szymkowicz, P. G. (2016). The effect of nozzle geometry over internal flow and spray formation for three different fuels. Fuel, 183, 20-33. doi:10.1016/j.fuel.2016.06.041

Hulkkonen, T., Sarjovaara, T., Kaario, O., Hamalainen, I., & Larmi, M. (2015). EXPERIMENTAL STUDY OF CONICAL DIESEL NOZZLE ORIFICE GEOMETRY. Atomization and Sprays, 25(6), 519-538. doi:10.1615/atomizspr.2015010383

Kuti, O. A., Zhu, J., Nishida, K., Wang, X., & Huang, Z. (2013). Characterization of spray and combustion processes of biodiesel fuel injected by diesel engine common rail system. Fuel, 104, 838-846. doi:10.1016/j.fuel.2012.05.014

Pickett, L. M., & Siebers, D. L. (2004). Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressure. Combustion and Flame, 138(1-2), 114-135. doi:10.1016/j.combustflame.2004.04.006

Wang, X., Huang, Z., Zhang, W., Kuti, O. A., & Nishida, K. (2011). Effects of ultra-high injection pressure and micro-hole nozzle on flame structure and soot formation of impinging diesel spray. Applied Energy, 88(5), 1620-1628. doi:10.1016/j.apenergy.2010.11.035

Agarwal, A. K., Dhar, A., Gupta, J. G., Kim, W. I., Choi, K., Lee, C. S., & Park, S. (2015). Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristics. Energy Conversion and Management, 91, 302-314. doi:10.1016/j.enconman.2014.12.004

Zhuang, J., Qiao, X., Bai, J., & Hu, Z. (2014). Effect of injection-strategy on combustion, performance and emission characteristics in a DI-diesel engine fueled with diesel from direct coal liquefaction. Fuel, 121, 141-148. doi:10.1016/j.fuel.2013.12.032

Park, S. H., Yoon, S. H., & Lee, C. S. (2011). Effects of multiple-injection strategies on overall spray behavior, combustion, and emissions reduction characteristics of biodiesel fuel. Applied Energy, 88(1), 88-98. doi:10.1016/j.apenergy.2010.07.024

Mancaruso, E., Sequino, L., & Vaglieco, B. M. (2016). Analysis of the pilot injection running Common Rail strategies in a research diesel engine by means of infrared diagnostics and 1d model. Fuel, 178, 188-201. doi:10.1016/j.fuel.2016.03.066

O’Connor, J., & Musculus, M. (2013). Post Injections for Soot Reduction in Diesel Engines: A Review of Current Understanding. SAE International Journal of Engines, 6(1), 400-421. doi:10.4271/2013-01-0917

Bosch, W. (1966). The Fuel Rate Indicator: A New Measuring Instrument For Display of the Characteristics of Individual Injection. SAE Technical Paper Series. doi:10.4271/660749

Payri, R., Salvador, F. J., Gimeno, J., & Bracho, G. (2008). A NEW METHODOLOGY FOR CORRECTING THE SIGNAL CUMULATIVE PHENOMENON ON INJECTION RATE MEASUREMENTS. Experimental Techniques, 32(1), 46-49. doi:10.1111/j.1747-1567.2007.00188.x

[-]

recommendations

 

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem