- -

Transient nozzle flow simulations of gasoline direct fuel injectors

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

  • Estadisticas de Uso

Transient nozzle flow simulations of gasoline direct fuel injectors

Mostrar el registro completo del ítem

Shahangian, N.; Sharifian, L.; Uehara, K.; Noguchi, Y.; Martínez-García, M.; Marti-Aldaravi, P.; Payri, R. (2020). Transient nozzle flow simulations of gasoline direct fuel injectors. Applied Thermal Engineering. 175:1-12. https://doi.org/10.1016/j.applthermaleng.2020.115356

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/166593

Ficheros en el ítem

Thumbnail
Nombre: Shahangan;Sharfan ...
Tamaño: 3.140Mb
Formato: PDF
Descripción: Versión del Autor.
Abrir/Preview
[Cerrado]
Nombre: Shahangian2020.pdf
Tamaño: 3.960Mb
Formato: PDF
Descripción: Versión editorial
Solicitar una copia al autor

Metadatos del ítem

Título: Transient nozzle flow simulations of gasoline direct fuel injectors
Autor: Shahangian, Navid Sharifian, Leila Uehara, Kazuhiro Noguchi, Yasushi Martínez-García, María Marti-Aldaravi, Pedro Payri, Raul
Entidad UPV: Universitat Politècnica de València. Departamento de Máquinas y Motores Térmicos - Departament de Màquines i Motors Tèrmics
Fecha difusión:
Resumen:
[EN] In the field of Internal Combustion Engines (ICE) the usage of Gasoline Direct fuel injectors (GDi) with gasoline, iso-octane, ethanol (or other alternative fuels) has gained relevance in the past years with the goal ...[+]
Palabras clave: GDi , CFD , Nozzle flow , Transient , Predictive model
Derechos de uso: Reconocimiento - No comercial - Sin obra derivada (by-nc-nd)
Fuente:
Applied Thermal Engineering. (issn: 1359-4311 )
DOI: 10.1016/j.applthermaleng.2020.115356
Editorial:
Elsevier
Versión del editor: https://doi.org/10.1016/j.applthermaleng.2020.115356
Código del Proyecto:
info:eu-repo/grantAgreement/GVA//ACIF%2F2018%2F118/
Agradecimientos:
Authors would like to acknowledge Toyota Motor Corporation (TMC) for providing the funds for this project. Authors would like to thank the "Fundacion del Centro de Supercomputacion de Castilla y Leon" (FCSCL) and "ACT now ...[+]
Tipo: Artículo

References

Liu, Q., Fu, J., Zhu, G., Li, Q., Liu, J., Duan, X., & Guo, Q. (2018). Comparative study on thermodynamics, combustion and emissions of turbocharged gasoline direct injection (GDI) engine under NEDC and steady-state conditions. Energy Conversion and Management, 169, 111-123. doi:10.1016/j.enconman.2018.05.047

B. Befrui, G. Corbinelli, M. D’Onofrio, D. Varble, GDI Multi-Hole Injector Internal Flow and Spray Analysis, SAE Technical Paper 2011-01-1211 (2011). doi:10.4271/2011-01-1211.

Payri, R., Gimeno, J., Marti-Aldaravi, P., & Vaquerizo, D. (2016). INTERNAL FLOW CHARACTERIZATION ON AN ECN GDi INJECTOR. Atomization and Sprays, 26(9), 889-919. doi:10.1615/atomizspr.2015013930 [+]
Liu, Q., Fu, J., Zhu, G., Li, Q., Liu, J., Duan, X., & Guo, Q. (2018). Comparative study on thermodynamics, combustion and emissions of turbocharged gasoline direct injection (GDI) engine under NEDC and steady-state conditions. Energy Conversion and Management, 169, 111-123. doi:10.1016/j.enconman.2018.05.047

B. Befrui, G. Corbinelli, M. D’Onofrio, D. Varble, GDI Multi-Hole Injector Internal Flow and Spray Analysis, SAE Technical Paper 2011-01-1211 (2011). doi:10.4271/2011-01-1211.

Payri, R., Gimeno, J., Marti-Aldaravi, P., & Vaquerizo, D. (2016). INTERNAL FLOW CHARACTERIZATION ON AN ECN GDi INJECTOR. Atomization and Sprays, 26(9), 889-919. doi:10.1615/atomizspr.2015013930

Duke, D. J., Kastengren, A. L., Matusik, K. E., Swantek, A. B., Powell, C. F., Payri, R., … Pickett, L. M. (2017). Internal and near nozzle measurements of Engine Combustion Network «Spray G» gasoline direct injectors. Experimental Thermal and Fluid Science, 88, 608-621. doi:10.1016/j.expthermflusci.2017.07.015

Zhao, L., Wang, M., Wang, P., Zhu, X., Qiu, Q., & Shen, S. (2018). Experimental study on the internal flow field and spray characteristics of hollow nozzle. Applied Thermal Engineering, 144, 757-768. doi:10.1016/j.applthermaleng.2018.06.047

Saha, K., Som, S., Battistoni, M., Li, Y., Pomraning, E., & Senecal, P. K. (2016). Numerical Investigation of Two-Phase Flow Evolution of In- and Near-Nozzle Regions of a Gasoline Direct Injection Engine During Needle Transients. SAE International Journal of Engines, 9(2), 1230-1240. doi:10.4271/2016-01-0870

S.E. Parrish, Evaluation of Liquid and Vapor Penetration of Sprays from a Multi-Hole Gasoline Fuel Injector Operating Under Engine-Like Conditions, SAE Technical Paper 2014–04-01 7 (2) (2014) 1017–1033. doi:10.4271/2014-01-1409.

Payri, R., Salvador, F. J., Martí-Aldaraví, P., & Vaquerizo, D. (2017). ECN Spray G external spray visualization and spray collapse description through penetration and morphology analysis. Applied Thermal Engineering, 112, 304-316. doi:10.1016/j.applthermaleng.2016.10.023

K. Saha, S. Som, M. Battistoni, Y. Li, S. Quan, P.K. Senecal, Modeling of Internal and Near-nozzle Flow for a GDI Fuel Injector, in: Proceedings of the ASME 2015 Internal Combustion Engine Division 138 (September) (2015) 1–13. doi:10.1115/ICEF2015-1112.

Baldwin, E. T., Grover, R. O., Parrish, S. E., Duke, D. J., Matusik, K. E., Powell, C. F., … Schmidt, D. P. (2016). String flash-boiling in gasoline direct injection simulations with transient needle motion. International Journal of Multiphase Flow, 87, 90-101. doi:10.1016/j.ijmultiphaseflow.2016.09.004

A. Montanaro, L. Allocca, M. Lazzaro, Iso-Octane Spray from a GDI Multi-Hole Injector under Non- and Flash Boiling Conditions (2017). doi:10.4271/2017-01-2319.

Huang, Y., Huang, S., Huang, R., & Hong, G. (2016). Spray and evaporation characteristics of ethanol and gasoline direct injection in non-evaporating, transition and flash-boiling conditions. Energy Conversion and Management, 108, 68-77. doi:10.1016/j.enconman.2015.10.081

Yang, S., Li, X., Hung, D. L. S., Arai, M., & Xu, M. (2019). In-nozzle flash boiling flow of multi-component fuel and its effect on near-nozzle spray. Fuel, 252, 55-67. doi:10.1016/j.fuel.2019.04.104

zamani, hamed, hosseini, vahid, Afshin, H., Allocca, L., … Baloo, M. (2016). Large Eddy Simulation of GDI Single-hole and Multi-hole Injector Sprays with Comparison of Numerical Break-up Models and Coefficients. Journal of Applied Fluid Mechanics, 9(2), 1013-1022. doi:10.18869/acadpub.jafm.68.225.22889

Befrui, B., Corbinelli, G., Spiekermann, P., Shost, M., & Lai, M.-C. (2012). Large Eddy Simulation of GDI Single-Hole Flow and Near-Field Spray. SAE International Journal of Fuels and Lubricants, 5(2), 620-636. doi:10.4271/2012-01-0392

Yue, Z., Battistoni, M., & Som, S. (2019). Spray characterization for engine combustion network Spray G injector using high-fidelity simulation with detailed injector geometry. International Journal of Engine Research, 21(1), 226-238. doi:10.1177/1468087419872398

M. Shost, M.-C. Lai, B. Befrui, P. Spiekermann, D.L. Varble, GDi Nozzle parameter studies using LES and spray imaging methods, in: SAE Technical Paper 2014-01-1434, vol. 1, 2014. doi:10.4271/2014-01-1434.

Wang, B., Badawy, T., Hutchins, P., Tu, P., Xu, H., & Zhang, X. (2017). Numerical Investigation of the Deposit Effect on GDI Injector Nozzle Flow. Energy Procedia, 105, 1671-1676. doi:10.1016/j.egypro.2017.03.545

Kong, S. C., Senecal, P. K., & Reitz, R. D. (1999). Developments in Spray Modeling in Diesel and Direct-Injection Gasoline Engines. Oil & Gas Science and Technology, 54(2), 197-204. doi:10.2516/ogst:1999015

Fan, L., & Reitz, R. D. (2000). SPRAY AND COMBUSTION MODELING IN GASOLINE DIRECT-INJECTION ENGINES. Atomization and Sprays, 10(3-5), 219-249. doi:10.1615/atomizspr.v10.i3-5.30

Senecal, P. K., Pomraning, E., Xue, Q., Som, S., Banerjee, S., Hu, B., … Deur, J. M. (2014). Large Eddy Simulation of Vaporizing Sprays Considering Multi-Injection Averaging and Grid-Convergent Mesh Resolution. Journal of Engineering for Gas Turbines and Power, 136(11). doi:10.1115/1.4027449

M. Battistoni, G.M. Magnotti, C.L. Genzale, M. Arienti, K.E. Matusik, D.J. Duke, J. Giraldo, J. Ilavsky, A.L. Kastengren, C.F. Powell, P. Marti-Aldaravi, Experimental and Computational Investigation of Subcritical Near-Nozzle Spray Structure and Primary Atomization in the Engine Combustion Network Spray D, SAE Technical Paper (2018-01-0277) (2018) 1–15. doi:10.4271/2018-01-0277.

Desantes, J. M., Garcia-Oliver, J. M., Pastor, J. M., & Pandal, A. (2016). A COMPARISON OF DIESEL SPRAYS CFD MODELING APPROACHES: DDM VERSUS E-Y EULERIAN ATOMIZATION MODEL. Atomization and Sprays, 26(7), 713-737. doi:10.1615/atomizspr.2015013285

K. Saha, P. Srivastava, S. Quan, P.K. Senecal, S. Som, Modeling the Dynamic Coupling of Internal Nozzle Flow and Spray Formation for Gasoline Direct Injection Applications, SAE Technical Paper (2018) 1–13doi:10.4271/2018-01-0314.Abstract.

Desantes, J. M., García-Oliver, J. M., Pastor, J. M., Pandal, A., Baldwin, E., & Schmidt, D. P. (2016). Coupled/decoupled spray simulation comparison of the ECN spray a condition with the -Y Eulerian atomization model. International Journal of Multiphase Flow, 80, 89-99. doi:10.1016/j.ijmultiphaseflow.2015.12.002

Saha, K., Som, S., & Battistoni, M. (2017). INVESTIGATION OF HOMOGENEOUS RELAXATION MODEL PARAMETERS AND THEIR IMPLICATIONS FOR GASOLINE INJECTORS. Atomization and Sprays, 27(4), 345-365. doi:10.1615/atomizspr.2017016338

R.O. Grover, D.J. Duke, K.E. Matusik, A.L. Kastengren, String Flash-Boiling in Flashing and Non-Flashing Gasoline Direction Injection Simulations with Transient Needle Motion University of Massachusetts Amherst General Motors Research and Development Energy Systems Division, Argonne National Laboratory, Lem, ILASS Americas 28th Annual Conference on Liquid Atomization and Spray Systems (May) (2016).

Battistoni, M., Som, S., & Powell, C. F. (2019). Highly resolved Eulerian simulations of fuel spray transients in single and multi-hole injectors: Nozzle flow and near-exit dynamics. Fuel, 251, 709-729. doi:10.1016/j.fuel.2019.04.076

N. Shahangian, L. Sharifian, J. Miyagawa, S. Bergamini, K. Uehara, Y. Noguchi, P. Marti-aldaravi, M. Martinez, R. Payri, Nozzle Flow and Spray Development One-Way Coupling Methodology for a Multi-Hole GDi Injector, SAE Technical Paper Series (2019). doi:10.4271/2019-24-0031.

E. Giannadakis, M. Gavaises, A. Theodorakakos, The influence of variable fuel properties in high-pressure diesel injectors, SAE Technical Paper 2009-01-0832 (2009).

R. Payri, J. Gimeno, P. Marti-aldaravi, M. Martínez, Nozzle Flow Simulation of GDi for Measuring Near-Field Spray Angle and Plume Direction, SAE Technical Paper 2019-01-0280 (2019) 1–11doi:10.4271/2019-01-0280.

Battistoni, M., Duke, D. J., Swantek, A. B., Tilocco, F. Z., Powell, C. F., & Som, S. (2015). EFFECTS OF NONCONDENSABLE GAS ON CAVITATING NOZZLES. Atomization and Sprays, 25(6), 453-483. doi:10.1615/atomizspr.2015011076

Schmidt, D. P., Gopalakrishnan, S., & Jasak, H. (2010). Multi-dimensional simulation of thermal non-equilibrium channel flow. International Journal of Multiphase Flow, 36(4), 284-292. doi:10.1016/j.ijmultiphaseflow.2009.11.012

P. Marti-Aldaravi, K. Saha, J. Gimeno, S. Som, Numerical Simulation of a Direct-Acting Piezoelectric Prototype Injector Nozzle Flow for Partial Needle Lifts, SAE Technical Papers 2017-24-01 (2017). doi:10.4271/2017-24-0101.

Q. Xue, S. Som, M. Battistoni, D.E. Longman, H. Zhao, P.K. Senecal, E. Pomraning, Three-dimensional Simulations of the transient internal flow in a diesel injector: effects of needle movement, ILASS Americas (2013).

Xue, Q., Battistoni, M., Som, S., Quan, S., Senecal, P. K., Pomraning, E., & Schmidt, D. (2014). Eulerian CFD Modeling of Coupled Nozzle Flow and Spray with Validation Against X-Ray Radiography Data. SAE International Journal of Engines, 7(2), 1061-1072. doi:10.4271/2014-01-1425

Battistoni, M., Xue, Q., Som, S., & Pomraning, E. (2014). Effect of Off-Axis Needle Motion on Internal Nozzle and Near Exit Flow in a Multi-Hole Diesel Injector. SAE International Journal of Fuels and Lubricants, 7(1), 167-182. doi:10.4271/2014-01-1426

Payri, R., Salvador, F. J., Martí-Aldaraví, P., & Martínez-López, J. (2012). Using one-dimensional modeling to analyse the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: Detailed injection system model. Energy Conversion and Management, 54(1), 90-99. doi:10.1016/j.enconman.2011.10.004

[-]

recommendations

 

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem