Assessing the environmental impact of Spanish vineyards in Utiel-Requena PDO: The influence of farm management and on-field emission modelling

Abstract

[EN] Environmental studies into wine from different protected designations of origin (PDO) highlight farming and packaging stages as those contributing the most to the total environmental impacts of this product. However, farming impact, not only depends on the agricultural practices but also on data quality and modelling complexity. By using the life cycle assessment methodology, a twofold goal is aimed. Firstly, to analyse the environmental profile of the most widespread viticultural practices in the Utiel-Requena PDO (Spain). The second aim is to evaluate the differences between the environmental impacts estimated by means of modelling approaches using generic information (Baseline modelling) versus those using site-specific information (Alternative modelling). As regards the agricultural practices and grape cultivars, eight systems were defined and assessed per kg of grape at the farm gate. The differences between farming systems and modelling approaches were statistically assessed. The results show that, regardless of the grape cultivar, organic systems are more environmentally friendly than the conventional ones (on average, the greatest differences occur in the ionizing radiation, marine eutrophication and land use, being the values for organic vineyards 1678%, 648% and 171% lower than those of the conventional ones, respectively), the results for the Bobal cultivar being better than those for the Tempranillo because of the higher yield (differences in yield around 1.500 kg ha¿1). The use of site-specific modelling approaches guarantees the precision of the analysis; however, for some impact categories, namely climate change, fine particulate matter formation, marine eutrophication and terrestrial acidification, the possibility of using general methodologies is open; in this way, the modelling efforts can be minimised, and the results would be consistent with those of more specific methodologies. The results also underline the need for a consensus within LCA practitioners on which methodologies to use in order to estimate on-field emissions taking into account both complexity reduction and accuracy improvement.