Structural analysis of monitoring results of long-span roof structures

Abstract

[EN] The concept of analysis of geodetic monitoring results solely from a geometric point of view is recognized as an obsolete approach. A complex analysis of geodetic measurements (geometric approach) and the structure stress-strain analysis (mechanical approach) allows obtaining the whole picture of any engineering structure displacements. The detailed scheme of the structural analysis of geospatial monitoring results of the long-span roof structures has been given in the presented paper. The results of the geospatial monitoring of the large warehouse have been chosen as a study subject. The structure's roof consists of planar trusses, the main objects of external loads combined with dead loads. According to the complex analysis procedure, the trusses were analyzed using the method of joints with the determination of partial member forces. At the next step, these forces were leveraged in the following order member force–member deformation–node displacement. To obtain the actual displacements of the truss nodes, one has to account for the vertical displacements of the leaning points where the truss touched the column. That step is also being accomplished using the method of joints. Having the actual node displacements, one may compare them with geodetic monitoring results. The comparison results generally allow us to reveal the places with unacceptable displacements and estimate whether they are determined with the necessary accuracy. In this particular case, the final node's displacements were yielded as an output of combined analysis, both geometric and mechanical. That, in turn, lets to acquire the deformation process's genuine parameters. The study results have shown the high efficiency of the presented research methodology.