- -

Autonomous Wireless Sensor System for Emergency Monitoring Roads with Low Communication Coverage

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

  • Estadisticas de Uso

Autonomous Wireless Sensor System for Emergency Monitoring Roads with Low Communication Coverage

Mostrar el registro completo del ítem

Postigo-Malaga, M.; Jimenez-Caceres, AM.; Pelegri-Sebastia, J.; Chilo, J. (2023). Autonomous Wireless Sensor System for Emergency Monitoring Roads with Low Communication Coverage. Electronics. 12(23). https://doi.org/10.3390/electronics12234829

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/203882

Ficheros en el ítem

Metadatos del ítem

Título: Autonomous Wireless Sensor System for Emergency Monitoring Roads with Low Communication Coverage
Autor: Postigo-Malaga, Mauricio Jimenez-Caceres, Alexander M. Pelegri-Sebastia, Jose Chilo, José
Entidad UPV: Universitat Politècnica de València. Escuela Politécnica Superior de Gandia - Escola Politècnica Superior de Gandia
Fecha difusión:
Resumen:
[EN] Rural areas often face communication challenges due to limited mobile coverage on remote roads, posing significant difficulties in reporting emergencies and accidents. This study presented an autonomous vehicle tracking ...[+]
Palabras clave: Wireless sensor system , Radars , Road-accidents emergency monitoring , Microcontrollers , 802.11 protocol , DigiMesh protocol
Derechos de uso: Reconocimiento (by)
Fuente:
Electronics. (eissn: 2079-9292 )
DOI: 10.3390/electronics12234829
Editorial:
MDPI AG
Versión del editor: https://doi.org/10.3390/electronics12234829
Coste APC: 2483
Agradecimientos:
This research was funded by the Electronic Engineering Research Center (CIIE UNSA) of the National University of San Agustín de Arequipa-Peru and by Universitat Politècnica de Valencia and the APC was funded by Universitat ...[+]
Tipo: Artículo

recommendations

 

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem