Algorithm for passive reactive power compensation of an unbalanced three-phase four-wire system using capacitors ensuring minimum line losses

Abstract

[EN] Currently in three-phase distribution networks, especially low-voltage networks, there are some inefficient powers. These are defined as reactive power, unbalanced power owing to linear loads, power owing to supply unbalanced voltage, and harmonic power. This has given rise to the concept of power quality. To improve power quality, devices called active filters have been developed. These devices eliminate all the inefficient power. However, for most processes, the elimination of reactive power needs to be from a price/performance perspective because the use of active filters is very expensive. Therefore, the use of capacitor banks in any of their versions (single-phase, three-phase, scalable battery, SVC, etc.) is the most economical and sufficient solution. In this study, a calculation algorithm is proposed to obtain compensators for the inductive reactive power of the load, consisting only of single-phase capacitor banks. These capacitors are designed to minimise losses in the supply line, which are lower than those obtained using the minimum loss line (MLL) strategy. The resulting compensator consists of three, two, or one capacitor, depending on the load characteristics.