- -

Design of the PET–MR system for head imaging of the DREAM Project

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

Design of the PET–MR system for head imaging of the DREAM Project

Mostrar el registro completo del ítem

González Martínez, AJ.; Conde, P.; Hernández Hernández, L.; Herrero Bosch, V.; Moliner Martínez, L.; Monzó Ferrer, JM.; Orero Palomares, A.... (2013). Design of the PET–MR system for head imaging of the DREAM Project. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 702:94-97. doi:10.1016/j.nima.2012.08.028

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/40669

Ficheros en el ítem

Metadatos del ítem

Título: Design of the PET–MR system for head imaging of the DREAM Project
Autor:
Entidad UPV: Universitat Politècnica de València. Instituto de Instrumentación para Imagen Molecular - Institut d'Instrumentació per a Imatge Molecular
Universitat Politècnica de València. Departamento de Ingeniería Electrónica - Departament d'Enginyeria Electrònica
Universitat Politècnica de València. Departamento de Matemática Aplicada - Departament de Matemàtica Aplicada
Fecha difusión:
Resumen:
In this paper we describe the overall design of a PET–MR system for head imaging within the framework of the DREAM Project as well as the first detector module tests. The PET system design consists of 4 rings of 16 ...[+]
Palabras clave: Hybrid PET–MR , SiPM
Derechos de uso: Reserva de todos los derechos
Fuente:
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. (issn: 0168-9002 )
DOI: 10.1016/j.nima.2012.08.028
Editorial:
Elsevier
Versión del editor: http://dx.doi.org/10.1016/j.nima.2012.08.028
Descripción: NOTICE: this is the author’s version of a work that was accepted for publication in Nuclear Instruments and Methods in Physics Research Section A. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Nuclear Instruments and Methods in Physics Research Section A, Volume 702, 21 February 2013, Pages 94–97 DOI 10.1016/j.nima.2012.08.028
Agradecimientos:
This work was supported by the Centre for Industrial Technological Development co-funded by FEDER through the Technology Fund (DREAM Project, IDI-20110718), the Spanish Plan Nacional de Investigacion Cientifica, Desarrollo ...[+]
Tipo: Artículo

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem