- -

Surface modification by injection moulding of polycaprolactone and polycaprolactone with tricalcium phosphate samples with sodium hydroxide

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

Surface modification by injection moulding of polycaprolactone and polycaprolactone with tricalcium phosphate samples with sodium hydroxide

Mostrar el registro completo del ítem

Navarro Navarro, J. (2014). Surface modification by injection moulding of polycaprolactone and polycaprolactone with tricalcium phosphate samples with sodium hydroxide. http://hdl.handle.net/10251/45528.

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/45528

Ficheros en el ítem

Metadatos del ítem

Título: Surface modification by injection moulding of polycaprolactone and polycaprolactone with tricalcium phosphate samples with sodium hydroxide
Autor:
Director(es): Ferrándiz Bou, Santiago
Entidad UPV: Universitat Politècnica de València. Escuela Politécnica Superior de Alcoy - Escola Politècnica Superior d'Alcoi
Fecha difusión:
Fecha acto/lectura: 2014-09-12
Resumen:
It is well know that polycaprolactone polymer (PCL) is gaining in popularity in the field of tissue engineering, due to its nontoxic degradation bi-products, and its low cost of manufacture through injection moulding. ...[+]
Derechos de uso: Cerrado
Titulación: Ingeniería de Materiales-Enginyeria de Materials
Tipo: Proyecto/Trabajo fin de carrera/grado

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem