Martí Vargas, JR. (2013). Pull-out and push-in tests of bonded steel strands. Magazine of Concrete Research. 65(18):1128-1131. doi:10.1680/macr.13.00061

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/49038

Ficheros en el ítem

Nombre: jrmarti_disc_MCR_ ...

Tamaño: 252.6Kb

Formato: PDF

Descripción: Versión del Autor.

Abrir/Preview

Nombre: Martí - Pull-out ...

Tamaño: 71.57Kb

Formato: PDF

Descripción: Versión editorial

Solicitar una copia al autor

Metadatos del ítem

Título:	Pull-out and push-in tests of bonded steel strands
Autor:	Martí Vargas, José Rocío
Entidad UPV:	Universitat Politècnica de València. Departamento de Ingeniería de la Construcción y de Proyectos de Ingeniería Civil - Departament d'Enginyeria de la Construcció i de Projectes d'Enginyeria Civil
Fecha difusión:	2013
Derechos de uso:	Reserva de todos los derechos
Fuente:	Magazine of Concrete Research. (issn: 0024-9831 )
DOI:	10.1680/macr.13.00061
Editorial:	Thomas Telford (ICE Publishing)
Versión del editor:	http://dx.doi.org/10.1680/macr.13.00061
Tipo:	Artículo

References

Balázs LG .Bond Model with Non-Linear Bond-Slip Law, 1987, Politecnico di Milano, Italy, 395–430, Studi e Ricerche, Post-Graduate Course for Reinforced Concrete Structures, V.8/86.

Balazs, G. L. (1992). Transfer Control of Prestressing Strands. PCI Journal, 37(6), 60-71. doi:10.15554/pcij.11011992.60.71

Balazs, G. L. (1993). Transfer Length of Prestressing Strand as a Function of Draw-In and Initial Prestress. PCI Journal, 38(2), 86-93. doi:10.15554/pcij.03011993.86.93 [+]

Balázs LG .Bond Model with Non-Linear Bond-Slip Law, 1987, Politecnico di Milano, Italy, 395–430, Studi e Ricerche, Post-Graduate Course for Reinforced Concrete Structures, V.8/86.

Balazs, G. L. (1992). Transfer Control of Prestressing Strands. PCI Journal, 37(6), 60-71. doi:10.15554/pcij.11011992.60.71

Balazs, G. L. (1993). Transfer Length of Prestressing Strand as a Function of Draw-In and Initial Prestress. PCI Journal, 38(2), 86-93. doi:10.15554/pcij.03011993.86.93

Balázs, G. L. (2007). Connecting Reinforcement to Concrete by Bond. Beton- und Stahlbetonbau, 102(S1), 46-50. doi:10.1002/best.200710109

Carmo RNF .Ancoragem de Armaduras Pré-Esforçadas por Pré-Tensão. MSc thesis, 1999, Faculdade de Ciências e Tecnologia, Universidade de Coimbra, Portugal, (in Portuguese).

Faria, D. M. V., Lúcio, V. J. G., & Pinho Ramos, A. (2011). Pull-out and push-in tests of bonded steel strands. Magazine of Concrete Research, 63(9), 689-705. doi:10.1680/macr.2011.63.9.689

Faria, D. M. V., Lúcio, V. J. G., & Ramos, A. P. (2011). Strengthening of flat slabs with post-tensioning using anchorages by bonding. Engineering Structures, 33(6), 2025-2043. doi:10.1016/j.engstruct.2011.02.039

Faria, D. M. V., Lúcio, V. J. G., & Pinho Ramos, A. (2012). Post-punching behaviour of flat slabs strengthened with a new technique using post-tensioning. Engineering Structures, 40, 383-397. doi:10.1016/j.engstruct.2012.03.014

Laldji S .Bond Characteristics of Prestressing Strand in Grout. MPhil thesis, 1987, University of Leicester, UK.

Laldji, S., & Young, A. G. (1988). Bond between steel strand and cement grout in ground anchorages. Magazine of Concrete Research, 40(143), 90-98. doi:10.1680/macr.1988.40.143.90

Lopes, S. M. R., & do Carmo, R. N. F. (2002). Bond of prestressed strands to concrete: transfer rate and relationship between transmission length and tendon draw-in. Structural Concrete, 3(3), 117-126. doi:10.1680/stco.2002.3.3.117

Martí-Vargas, J. R., Serna-Ros, P., Fernández-Prada, M. A., Miguel-Sosa, P. F., & Arbeláez, C. A. (2006). Test method for determination of the transmission and anchorage lengths in prestressed reinforcement. Magazine of Concrete Research, 58(1), 21-29. doi:10.1680/macr.2006.58.1.21

Marti-Vargas, J. R., Arbelaez, C. A., Serna-Ros, P., Navarro-Gregori, J., & Pallares-Rubio, L. (2007). Analytical model for transfer length prediction of 13 mm prestressing strand. Structural Engineering and Mechanics, 26(2), 211-229. doi:10.12989/sem.2007.26.2.211

Palmer, K. D., & Schultz, A. E. (2011). Experimental investigation of the web-shear strength of deep hollow-core units. PCI Journal, 56(4), 83-104. doi:10.15554/pcij.09012011.83.104

[-]

recommendations

 

Este ítem aparece en la(s) siguiente(s) colección(ones)

• Artículos, conferencias, monografías [45809]
  

Mostrar el registro completo del ítem