Antonino-Daviu, J.; Riera-Guasp, M.; Pons Llinares, J.; Roger-Folch, J.; Perez, R.; Charlton-Perez, C. (2012). Toward condition monitoring of damper windings in synchronous motors via EMD analysis. IEEE Transactions on Energy Conversion. 27(2):432-439. https://doi.org/10.1109/TEC.2012.2190292
Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/99447
Título:
|
Toward condition monitoring of damper windings in synchronous motors via EMD analysis
|
Autor:
|
Antonino-Daviu, J.
Riera-Guasp, Martín
Pons Llinares, Joan
Roger-Folch, José
PEREZ, R.
Charlton-Perez, Cristina
|
Entidad UPV:
|
Universitat Politècnica de València. Departamento de Ingeniería Eléctrica - Departament d'Enginyeria Elèctrica
|
Fecha difusión:
|
|
Resumen:
|
[EN] Failures in damper windings of synchronous machines operating in real facilities have been recently reported by several authors and companies. These windings are crucial elements of synchronous motors and generators, ...[+]
[EN] Failures in damper windings of synchronous machines operating in real facilities have been recently reported by several authors and companies. These windings are crucial elements of synchronous motors and generators, playing an important role in the asynchronous startup of these machines as well as in their stability during load transients. However, the diagnosis of failures in such elements has barely been studied in the literature. This paper presents a method to diagnose the condition of damper bars in synchronous motors. It is based on the capture of the stator current of the machine during a direct startup and its further analysis in order to track the characteristic transient evolution of a particular fault-related component in the time-frequency map. The fact that the damper only carries significant current during the startup and little or no current, when the machine operates in steady state, makes this transient-based approach specially suited for the detection of such failure. The Hilbert-Huang transform (based on the empirical mode decomposition method) is proposed as a signal-processing tool. Simulation and experimental results on laboratory synchronous machines prove the validity of the approach for condition monitoring of such windings. © 2012 IEEE.
[-]
|
Palabras clave:
|
Condition monitoring
,
Damper windings
,
Hilbert-Huang transform (HHT)
,
Synchronous motors
,
Transient analysis
,
Empirical mode decomposition method
,
Hilbert Huang transforms
,
Load transients
,
Stator currents
,
Steady state
,
Synchronous machine
,
Time-frequency map
,
Transient evolution
,
Asynchronous generators
,
Power quality
,
Signal processing
,
Winding
|
Derechos de uso:
|
Reserva de todos los derechos
|
Fuente:
|
IEEE Transactions on Energy Conversion. (issn:
0885-8969
)
|
DOI:
|
10.1109/TEC.2012.2190292
|
Editorial:
|
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
|
Versión del editor:
|
http://doi.org/10.1109/TEC.2012.2190292
|
Código del Proyecto:
|
info:eu-repo/grantAgreement/MICINN//DPI2011-23740/ES/DESARROLLO DE TECNICAS DE DIAGNOSTICO DE AVERIAS INCIPIENTES EN AEROGENERADORES, MEDIANTE EL ANALISIS TIEMPO-FRECUENCIA DE MAGNITUDES ELECTRICAS/
|
Descripción:
|
(c) 2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
|
Agradecimientos:
|
This work was supported by the Spanish Ministerio de Ciencia e Innovacion (MICINN) in the framework of the VI Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica 2008-2011. (Programa Nacional de ...[+]
This work was supported by the Spanish Ministerio de Ciencia e Innovacion (MICINN) in the framework of the VI Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica 2008-2011. (Programa Nacional de proyectos de Investigacion Fundamental, project reference DPI2011-23740). Paper no. TEC-00443-2011.
[-]
|
Tipo:
|
Artículo
|