STRUCTURE ANALYSIS AND BIOMASS MODELS FOR PLUM TREE (PRUNUS DOMESTICA L.) IN ECUADOR

Abstract

The development of dendrometric methodologies could allow accurate estimation of variables associated with the crown, such as primary production (fruit and timber) and tree vigor. The aim of this work was to develop a suitable method to estimate woody biomass in plum trees (Prunus domestica L.) in Imbabura, Ecuador by using an adapted dendrometry. Form factors and regression models were defined for branch volume calculation. From this, the distribution of woody biomass in the crown tree was characterized in every stratum. Occupation Factor and regression models were obtained in order to calculate the biomass in the crown tree, which can be used to estimate the CO2 captured in its structure during its development. Regression models for calculation of whole volume of the tree and pruned biomass were directly obtained from crown diameter and crown height with Rajustated 2 of 0.74 and 0.81. The average moisture content of green material was 51%, and the average density of dry material was 0.66 ± 0.07 g cm−3. Proximate analysis of plum wood showed at 79.8 ± 9.2% volatiles and 2.1 ± 0.3% ash. Elemental analysis of the wood pointed to 46.5 ± 1.2% C, 6.1 ± 0.5% H, 46.3 ± 1.2% O, 0.6 ± 0.3% N, 0.06 ± 0.02% S and 0.02 ± 0.01% Cl. Cl, S and N contents are lower than the limits established by the standard EN 14691-part 4.With 46% of C, considering the relation 3.67 (44/12) between CO2 and C content, the CO2 sequestrated in the materials is 1.11 Mg m−3 wood material. Such method represents a tool to manage orchard resources and for assessing other parameters, such as raw materials for cultivation, fruit production, CO2 sink and waste materials (residual wood) used for energy or industry.