- -

Analysis of the energy balance during World harmonized Light vehicles Test Cycle in warmed and cold conditions using a Virtual Engine

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

  • Estadisticas de Uso

Analysis of the energy balance during World harmonized Light vehicles Test Cycle in warmed and cold conditions using a Virtual Engine

Mostrar el registro completo del ítem

Olmeda, P.; Martín, J.; Arnau Martínez, FJ.; Artham, S. (2020). Analysis of the energy balance during World harmonized Light vehicles Test Cycle in warmed and cold conditions using a Virtual Engine. International Journal of Engine Research. 21(6):1037-1054. https://doi.org/10.1177/1468087419878593

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/169182

Ficheros en el ítem

Metadatos del ítem

Título: Analysis of the energy balance during World harmonized Light vehicles Test Cycle in warmed and cold conditions using a Virtual Engine
Autor: Olmeda, P. Martín, Jaime Arnau Martínez, Francisco José Artham, Sushma
Entidad UPV: Universitat Politècnica de València. Departamento de Máquinas y Motores Térmicos - Departament de Màquines i Motors Tèrmics
Fecha difusión:
Resumen:
[EN] In recent years, the interests on transient operation and real driving emissions have increased because of the global concern about environmental pollution that has led to new emissions regulation and new standard ...[+]
Palabras clave: Transient , Global energy balance , Virtual Engine , World harmonized Light vehicles Test Cycle
Derechos de uso: Reserva de todos los derechos
Fuente:
International Journal of Engine Research. (issn: 1468-0874 )
DOI: 10.1177/1468087419878593
Editorial:
SAGE Publications
Versión del editor: https://doi.org/10.1177/1468087419878593
Código del Proyecto:
info:eu-repo/grantAgreement/EC/H2020/723976/EU/Diesel efficiency improvement with Particulates and emission Reduction/
info:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016/TRA2017-89894-R/ES/METODOLOGIA PARA LA PREDICCION DE EMISIONES DE CO2 Y CONTAMINANTES DE UN MOTOR ALTERNATIVO/
Descripción: This is the author's version of a work that was accepted for publication in International Journal of Engine Research. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published as https://doi.org/10.1177/1468087419878593.
Agradecimientos:
The author(s) disclosed receipt of the following financial support for the research, authorship and/or publication of this article: This research has been partially funded by the European Union's Horizon 2020 Framework ...[+]
Tipo: Artículo

References

Tauzia, X., Maiboom, A., Karaky, H., & Chesse, P. (2018). Experimental analysis of the influence of coolant and oil temperature on combustion and emissions in an automotive diesel engine. International Journal of Engine Research, 20(2), 247-260. doi:10.1177/1468087417749391

Payri, F., Olmeda, P., Martin, J., & Carreño, R. (2014). A New Tool to Perform Global Energy Balances in DI Diesel Engines. SAE International Journal of Engines, 7(1), 43-59. doi:10.4271/2014-01-0665

Tauzia, X., & Maiboom, A. (2013). Experimental study of an automotive Diesel engine efficiency when running under stoichiometric conditions. Applied Energy, 105, 116-124. doi:10.1016/j.apenergy.2012.12.034 [+]
Tauzia, X., Maiboom, A., Karaky, H., & Chesse, P. (2018). Experimental analysis of the influence of coolant and oil temperature on combustion and emissions in an automotive diesel engine. International Journal of Engine Research, 20(2), 247-260. doi:10.1177/1468087417749391

Payri, F., Olmeda, P., Martin, J., & Carreño, R. (2014). A New Tool to Perform Global Energy Balances in DI Diesel Engines. SAE International Journal of Engines, 7(1), 43-59. doi:10.4271/2014-01-0665

Tauzia, X., & Maiboom, A. (2013). Experimental study of an automotive Diesel engine efficiency when running under stoichiometric conditions. Applied Energy, 105, 116-124. doi:10.1016/j.apenergy.2012.12.034

Abedin, M. J., Masjuki, H. H., Kalam, M. A., Sanjid, A., Rahman, S. M. A., & Masum, B. M. (2013). Energy balance of internal combustion engines using alternative fuels. Renewable and Sustainable Energy Reviews, 26, 20-33. doi:10.1016/j.rser.2013.05.049

Ajav, E. A., Singh, B., & Bhattacharya, T. K. (2000). Thermal balance of a single cylinder diesel engine operating on alternative fuels. Energy Conversion and Management, 41(14), 1533-1541. doi:10.1016/s0196-8904(99)00175-2

DIMOPOULOS, P., BACH, C., SOLTIC, P., & BOULOUCHOS, K. (2008). Hydrogen–natural gas blends fuelling passenger car engines: Combustion, emissions and well-to-wheels assessment. International Journal of Hydrogen Energy, 33(23), 7224-7236. doi:10.1016/j.ijhydene.2008.07.012

TAYMAZ, I. (2006). An experimental study of energy balance in low heat rejection diesel engine. Energy, 31(2-3), 364-371. doi:10.1016/j.energy.2005.02.004

Olmeda, P., Martín, J., Novella, R., & Blanco-Cavero, D. (2018). Assessing the optimum combustion under constrained conditions. International Journal of Engine Research, 21(5), 811-823. doi:10.1177/1468087418814086

Durgun, O., & Şahin, Z. (2009). Theoretical investigation of heat balance in direct injection (DI) diesel engines for neat diesel fuel and gasoline fumigation. Energy Conversion and Management, 50(1), 43-51. doi:10.1016/j.enconman.2008.09.007

Jia, M., Gingrich, E., Wang, H., Li, Y., Ghandhi, J. B., & Reitz, R. D. (2015). Effect of combustion regime on in-cylinder heat transfer in internal combustion engines. International Journal of Engine Research, 17(3), 331-346. doi:10.1177/1468087415575647

Jung, D., Yong, J., Choi, H., Song, H., & Min, K. (2013). Analysis of engine temperature and energy flow in diesel engine using engine thermal management. Journal of Mechanical Science and Technology, 27(2), 583-592. doi:10.1007/s12206-012-1235-4

Caresana, F., Bilancia, M., & Bartolini, C. M. (2011). Numerical method for assessing the potential of smart engine thermal management: Application to a medium-upper segment passenger car. Applied Thermal Engineering, 31(16), 3559-3568. doi:10.1016/j.applthermaleng.2011.07.017

Payri, F., López, J. J., Martín, J., & Carreño, R. (2018). Improvement and application of a methodology to perform the Global Energy Balance in internal combustion engines. Part 1: Global Energy Balance tool development and calibration. Energy, 152, 666-681. doi:10.1016/j.energy.2018.03.118

Arrègle, J., López, J. J., Garcı́a, J. M., & Fenollosa, C. (2003). Development of a zero-dimensional Diesel combustion model. Applied Thermal Engineering, 23(11), 1319-1331. doi:10.1016/s1359-4311(03)00080-2

Arrègle, J., López, J. J., Garcı́a, J. M., & Fenollosa, C. (2003). Development of a zero-dimensional Diesel combustion model. Part 1: Analysis of the quasi-steady diffusion combustion phase. Applied Thermal Engineering, 23(11), 1301-1317. doi:10.1016/s1359-4311(03)00079-6

Benajes, J., Olmeda, P., Martín, J., & Carreño, R. (2014). A new methodology for uncertainties characterization in combustion diagnosis and thermodynamic modelling. Applied Thermal Engineering, 71(1), 389-399. doi:10.1016/j.applthermaleng.2014.07.010

Payri, F., Olmeda, P., Martín, J., & Carreño, R. (2015). Experimental analysis of the global energy balance in a DI diesel engine. Applied Thermal Engineering, 89, 545-557. doi:10.1016/j.applthermaleng.2015.06.005

Olmeda, P., Dolz, V., Arnau, F. J., & Reyes-Belmonte, M. A. (2013). Determination of heat flows inside turbochargers by means of a one dimensional lumped model. Mathematical and Computer Modelling, 57(7-8), 1847-1852. doi:10.1016/j.mcm.2011.11.078

Torregrosa, A., Olmeda, P., Degraeuwe, B., & Reyes, M. (2006). A concise wall temperature model for DI Diesel engines. Applied Thermal Engineering, 26(11-12), 1320-1327. doi:10.1016/j.applthermaleng.2005.10.021

Payri, R., Salvador, F. J., Gimeno, J., & Bracho, G. (2008). A NEW METHODOLOGY FOR CORRECTING THE SIGNAL CUMULATIVE PHENOMENON ON INJECTION RATE MEASUREMENTS. Experimental Techniques, 32(1), 46-49. doi:10.1111/j.1747-1567.2007.00188.x

Tormos, B., Martín, J., Carreño, R., & Ramírez, L. (2018). A general model to evaluate mechanical losses and auxiliary energy consumption in reciprocating internal combustion engines. Tribology International, 123, 161-179. doi:10.1016/j.triboint.2018.03.007

[-]

recommendations

 

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem