Comprehensive Method for Obtaining Multi-Fidelity Surrogate Models for Design Space Approximation: Application to Multi-Dimensional Simulations of Condensation Due to Mixing Streams

Abstract

[EN] In engineering problems, design space approximation using accurate computational models may require conducting a simulation for each explored working point, which is often not feasible in computational terms. For problems with numerous parameters and computationally demanding simulations, the possibility of resorting to multi-fidelity surrogates arises as a means to alleviate the effort by employing a reduced number of high-fidelity and expensive simulations and predicting a much cheaper low-fidelity model. A multi-fidelity approach for design space approximation is therefore proposed, requiring two different designs of experiments to assess the best combination of surrogate models and an intermediate meta-modeled variable. The strategy is applied to the prediction of condensation that occurs when two humid air streams are mixed in a three-way junction, which occurs when using low-pressure exhaust gas recirculation to reduce piston engine emissions. In this particular case, most of the assessed combinations of surrogate and intermediate variables provide a good agreement between observed and predicted values, resulting in the lowest normalized mean absolute error (3.4%) by constructing a polynomial response surface using a multi-fidelity additive scaling variable that calculates the difference between the low-fidelity and high-fidelity predictions of the condensation mass flow rate.