- -

Surface modification of polypropylene substrates by UV photografting of methyl methacrylate (MMA) for improved surface wettability

RiuNet: Repositorio Institucional de la Universidad Politécnica de Valencia

Compartir/Enviar a

Citas

Estadísticas

Surface modification of polypropylene substrates by UV photografting of methyl methacrylate (MMA) for improved surface wettability

Mostrar el registro completo del ítem

Balart Gimeno, JF.; Fombuena Borrás, V.; Boronat Vitoria, T.; Reig Pérez, MJ.; Balart Gimeno, RA. (2012). Surface modification of polypropylene substrates by UV photografting of methyl methacrylate (MMA) for improved surface wettability. Journal of Materials Science. 47(5):2375-2383. doi:10.1007/s10853-011-6056-9.

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10251/48418

Ficheros en el ítem

Metadatos del ítem

Título: Surface modification of polypropylene substrates by UV photografting of methyl methacrylate (MMA) for improved surface wettability
Autor:
Entidad UPV: Universitat Politècnica de València. Departamento de Ingeniería Mecánica y de Materiales - Departament d'Enginyeria Mecànica i de Materials
Universitat Politècnica de València. Instituto de Tecnología de Materiales - Institut de Tecnologia de Materials
Fecha difusión:
Resumen:
Despite polypropylene is one of the most used commodity plastics, its adhesion properties are remarkably restricted by its non-polar nature which leads to low wetting properties and, consequently, poor adhesion behavior. ...[+]
Palabras clave: Adhesion properties , Chemical change , Chemical treatments , Commodity plastics , Exposure-time , Fourier transformed infrared spectroscopy , Methyl methacrylates , Non-polar , Photo-grafting , Poor adhesion , Quantitative evaluation , Surface activation , Surface changes , Surface free energy , Surface wettability , UV-photografting , Wetting property , Adhesion , Atomic force microscopy , Contact angle , Esters , Grafting (chemical) , Infrared spectroscopy , Plastic products , Quality control , Scanning electron microscopy , Thermoplastics , Ultraviolet radiation , Wetting , Polypropylenes
Derechos de uso: Reserva de todos los derechos
Fuente:
Journal of Materials Science. (issn: 0022-2461 ) (eissn: 1573-4803 )
DOI: 10.1007/s10853-011-6056-9
Editorial:
Springer Verlag (Germany)
Versión del editor: http://dx.doi.org/10.1007/s10853-011-6056-9
Descripción: The final publication is available at Springer via http://dx.doi.org/10.1007/s10853-011-6056-9
Patrocinador:
Ministerio de Ciencia e Innovacion
Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica [189540.20]
European Union
Tipo: Artículo

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro completo del ítem